New
#11
Network Access.
-
-
-
New #13
Network discovery must be turned on to access network shares by their NetBIOS name. You need to access the share using the IP address.
-
New #14
This is how things used to be.
Here I could click WDTV Live and get access to my files if the WDTV drive was On or Off using both my old Win7 computers.
This is what I get after Mapping my drive when its not On. If it Is On I still don't get access to my files.
Both images done on Win10 Laptop.
-
New #15
Not sure if this applies or not...but do you have SMB v1 activated?This is how things used to be.
Here I could click WDTV Live and get access to my files if the WDTV drive was On or Off using both my old Win7 computers.
This is what I get after Mapping my drive when its not On. If it Is On I still don't get access to my files.
Both images done on Win10 Laptop.
Enable or Disable SMB1 File Sharing Protocol in Windows
-
New #16
I have never heard of SMB1 but the good news is, I fixed it.
The drive is connected to my Network Wirelessly, and to my TV using an HDMI cable.
I have tried to get an answer on other forums plus searching Google.
My last bit of info was to turn off password sharing in all Networks in Win10. It worked.
I then did the same on my Win7 32bit PC before posting this, it also worked.
I am now on my Win10 pc a few hours after disabling password sharing, I tried to access my drive but it failed.
Half way through printing this post, I tried it again and it now works. Must be some sort of delayed action.
Thank for trying iko22.
Quote
Related Discussions
