Need help with connecting a network device (Media Player) via Ethernet Solved

  1. Posts : 3
    Windows 10

    Need help with connecting a network device (Media Player) via Ethernet

    I have had a Dune Media Player for probably about 8 years and 2 or 3 windows reinstalls. I would install windows 10 and click on Network in file explorer and I would see my Dune which has 3 hard drives connected to it and I would simply assign drive letters to each hard drive.

    My main PC is connected to the Dune via Ethernet.

    Last month I had a major hard drive crash on my PC and decided to upgrade to a larger SSD on my computer and install a fresh install of windows 10. Everything went smooth and things are working better than ever except for this one thing.

    The Dune Ethernet runs to my Buffalo router and then from the router I have an Ethernet cable to my PC. I also have Fire TV, Roku TV, my printer, and AVR all connected the same way to my computer.

    The strange thing is, I can see everything showing up on my PC except the Dune Media Player which is the main thing I need to work with to move files from my PC to the media player.

    Since the crash I have not touched or changed any of the Ethernet connections. This tells me there is some type of setting issue in windows I need to change. However, when it comes to network issues, my computer skills are very limited.

    The hard drives that work with the Dune are all EXT2 formatted so walking a hard drive to my computer then down to the Dune is not very practical.

    I am baffled as this always just worked.

    I have Windows 10 Education 1903 installed. Previously I had a non Education of 1903 installed but I could not find my windows install disk and code (I may have done the free Win 10 upgrade from Win 8 when it was available) and since I work at the University I bought a copy from them. I believe the EDU Windows mess with some of the normal Win 10 default settings but don't know where to start with this issue.

      My ComputerSystem Spec

  2. bro67's Avatar
    Posts : 7,346
    Mac OS Mojave

    SMBv1 needs to be enabled in Windows 10 in order to connect to that older hardware.
      My ComputersSystem Spec

  3. Posts : 3
    Windows 10
    Thread Starter

    bro67 said: View Post
    SMBv1 needs to be enabled in Windows 10 in order to connect to that older hardware.
    Yes, my first thought, I already went into Windows Features and activated:

    SMB 1.0/CFSFile Sharing support
    SMB 1.0/CFSFile Automatic Removal
    SMB 1.0/CFSFile Client
    SMB 1.0/CFSFile Server

    SMB Direct

    Nothing changed after full reboot.
      My ComputerSystem Spec

  4. bro67's Avatar
    Posts : 7,346
    Mac OS Mojave

    You could always use NFS.
      My ComputersSystem Spec

  5. Posts : 3
    Windows 10
    Thread Starter

    I was thinking and basically what my Dune is is a NAS. Searching on how to connect my Dune to Win 10 brought up nothing, so I searched can't connect to my NAS with Win 10 and found the answer:

    1. run cmd as admin

    2. netsh winsock reset

    2. sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi

    3. sc.exe config mrxsmb20 start= disabled

    4. Enabling NetBIOS over TCP/IP

    5. Editing the Hosts file located in c:\windows\system32\drivers\etc, added the IP address of your NAS Drive and its name

    I am not sure what all that does but I see my Dune now and hope it continues to work.

    Thanks all and sorry for the bother.
      My ComputerSystem Spec


Related Threads
So I am going to tell you about this, when I was trying to open a DVD on a third-party media player, it doesn't play. I tried VLC, but it doesn't play without an error, while I tried it on 5KPlayer, but it has the same issue as VLC, then, I tried it...
For perhaps a decade now I have watched video and listened to music from my computer's media collection (now grown to over 6 terabytes) using a wired ethernet connection over to my stereo/TV thru a media streaming device (currently an LG bluray...
Debug report attached. 27187
network changed to media device in Network and Sharing
Hi, I have 2 computers on a workgroup network. I don't use Home network. This was working right before. Now, the second computer shows up as a media device on the first computer. Media Steaming is off. The network page says computer1 and...
Win 10 home, 64-bit on HP Laptop. just upgraded from Win 8.1. I have a 2.4MHz Network with a Guest account. My network shows up in wifi as eg. ssidname-2G and ssidname-2G-guest. I can log in and use either of these connections to successfully...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:30.
Find Us