Can't see NAS (SMBv1), even via IP address (tried common solutions) Solved

Page 4 of 4 FirstFirst ... 234
  1.    4 Weeks Ago #31

    @Blaq ... FWIW ...
    You can find out which SMB Version/Dialect Win10 is actually using when connecting to your NAS and Other PC's. It requires you have an active connection to Share Folders.
    1. Open PowerShell as Admin
    2. In File Explorer > Network > Open a shared folder on your NAS and your other Win10 PC
    3. In the PowerShell Window run the command get-smbconnection
    4. The Dialect is the SMB Version (i.e. mine is using SMBv3 ... Dialect 3.1.1 ... in the example below)
    5. Yours should/will probably be SMBv1 (Dialect 1.1.1) for your NAS Shares and SMBv3 (Dialect 3.1.1) for you Win10 PC Shares.

    PS C:\WINDOWS\system32> get-smbconnection
    ServerName  ShareName  UserName        Credential      Dialect NumOpens
    ----------  ---------  --------        ----------      ------- -------- ShareDrive EAGLE-HPL\ EAGLE-HPL\ 3.1.1   1 TempFiles  EAGLE-HPL\ EAGLE-HPL\ 3.1.1   1 User       EAGLE-HPL\ EAGLE-HPL\ 3.1.1   1 www        EAGLE-HPL\ EAGLE-HPL\ 3.1.1   1
    EAGLE-HPD   IPC$       EAGLE-HPL\ EAGLE-HPL\ 3.1.1  
    EAGLE-HPD   TempFiles  EAGLE-HPL\ EAGLE-HPL\ 3.1.1   1
    EAGLE-HPD   User       EAGLE-HPL\ EAGLE-HPL\ 3.1.1   7
    EAGLE-HPD   www        EAGLE-HPL\ EAGLE-HPL\ 3.1.1   3
    PS C:\WINDOWS\system32>
    1. Connected Mapped Network Drives will automatically show since they are active connections. You can tell mine in the above example, because I use Static IPs and Map Network Drives by IP ... You may or may not have mapped network drives.
    2. The others using PCNAME are the ones I manually went to in File Explorer > Network > ShareName
    3. I've removed my UserName from the above output. You don't need to post your result, but if you do remove your UserName.
      My ComputersSystem Spec

  2.    3 Weeks Ago #32

    `sudo` is not found on my DSN-325. I'll have to check whether it was installed by default or came with fun_plug 0.7.
      My ComputerSystem Spec

Page 4 of 4 FirstFirst ... 234

Related Threads
My small LAN consists of only 2 PCs, my desktop and my notebook, both running Windows 10 Home. There are also various Apple devices, an Amazon device, some home security devices, and an ASUS RT-N56U router. Three days ago, I installed Windows 10...
72hz not too common in Graphic Cards
I have Samsung C27F591 and I set it up to 72hz. Many games doesn`t support 72hz so it will lock with vsync my fps to 60 and because of that I will have stutter and screen tearing. For example Metro Last light vsync is 60fps. Would it be good to...
Hi there just another little annoyance on Networking from Ms. Hidden away in small print on the Ms site is this : ....Windows 10 Home and Windows 10 Professional still contain the SMBv1 client by default after a clean installation. If the...
Following on from the discussion below in the Ransomware thread, I've been trying to turn off SMB1 in Windows (given it's been highlighted as an security risk) but still retain access to my Seagate Goflex Home, which is an old NAS device. However...
A machine running 64-bit win10 belongs to one WorkGroup, connects to the LAN via EtherNet for speed but it must be available via wifi also, so both connections are open. For an Android device to access an app served by a webapp served on the win10...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:41.
Find Us