Can't see NAS (SMBv1), even via IP address (tried common solutions)

Page 2 of 4 FirstFirst 1234 LastLast

  1. Blaq
    Posts : 35
    Windows 10
    Thread Starter
       New #11

    Hey Eagle51,

    I ran your 4 commands and `sc.exe config mrxsmb10 start= auto` gave me an error 1060. I checked Control Panel and found that, out of the three SMBv1 Windows components, the SMB 1.0/CIFS Client was not enabled.

    I checked it, rebooted, and ran `sc.exe config mrxsmb10 start= auto`; it worked fine. I rebooted the PC and NAS and, in Windows Explorer > Network, I couldn't see the NAS even after refreshing.

    I was, however, able to enter "\\DLINK-019B49" in the address bar and make the NAS appear under Network; I remembered a tip from another forum and right-clicked to add \\ DLINK-019B49to the Quick Access area. It's a minor inconvenience, but at least I now have access to my NAS and can resume nightly backups.

    Do you have any suggestions how to make the NAS appear in Network without requiring me to click the Quick Access entry? It's not that I'm lazy, but thorough, and this behaviour indicates there is still something wrong with my networking. Thanks!
      My Computer
    Quote Quote

  3. Eagle51
    Posts : 1,471
    Win10 Home x64 - 1809
       New #12

    Hey blaq,
    Yea, those 4 commands are if you have SMBv1 installed and enable. The output of the script your ran showed you did have SMBv1 installed and enabled. However it showed that the DependOnSevice didn't have mrxsmb10, which is what the first command should have fixed. The other commands are just to make sure those services auto start.

    1. I assume this is same PC you ran the script on ?
    2. Re-run the script and post the result.
    3. You can map your NAS as a Network Drive so it appears in File Explorer > Navigation Pane using (Option 1) in this tutorial - Map Network Drive in Windows 10 | Windows 10 Tutorials
      My Computers
    Quote Quote

  4. Blaq
    Posts : 35
    Windows 10
    Thread Starter
       New #13

    Yes, this is always the same PC. Here's the latest output:

    Code:
    CHECKING SMB FOR COMPUTER CHARLES-DELL @ 10/4/2018 3:13 PM
===================
SMBv1 FEATURES
===================
FeatureName      : SMB1Protocol
State            : Enabled
FeatureName      : SMB1Protocol-Client
State            : Enabled
FeatureName      : SMB1Protocol-Server
State            : Enabled
FeatureName      : SMB1Protocol-Deprecation
State            : Enabled
 
===================
SMBv1 PROTOCOLS
===================


EnableSMB1Protocol : True
EnableSMB2Protocol : True



==================
SMB SERVICES
==================
 
SERVICE_NAME: mrxsmb10 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: mrxsmb10 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: mrxsmb20 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: browser 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: fdphost 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START  (DELAYED)
SERVICE_NAME: fdrespub 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START  (DELAYED)
SERVICE_NAME: ssdpsrv 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START  (DELAYED)
SERVICE_NAME: upnphost 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START  (DELAYED)
SERVICE_NAME: dhcp 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: dnscache 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: iphlpsvc 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: lmhosts 
        STATE              : 4  RUNNING 
        START_TYPE         : 3   DEMAND_START
SERVICE_NAME: lanmanserver 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: lanmanworkstation 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
 
=================
SMB REGISTRY KEYS
=================
NO SMB1 KEY
NO SMB2 KEY


DependOnService : {bowser, mrxsmb10, mrxsmb20, nsi}



NO BROWSER KEY
 
========================
LANMAN SERVER PARAMETERS
========================


ServiceDll                    : C:\WINDOWS\system32\srvsvc.dll
ServiceDllUnloadOnStop        : 1
CachedOpenLimit               : 0
EnableAuthenticateUserSharing : 1
EnableForcedLogoff            : 1
EnableSecuritySignature       : 0
LmAnnounce                    : 0
NullSessionPipes              : {}
RequireSecuritySignature      : 0
RestrictNullSessAccess        : 1
Size                          : 1
SrvComment                    : Charles-Dell
Guid                          : {1, 185, 245, 27...}
PSPath                        : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Serv
                                ices\LanmanServer\Parameters
PSParentPath                  : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Serv
                                ices\LanmanServer
PSChildName                   : Parameters
PSDrive                       : HKLM
PSProvider                    : Microsoft.PowerShell.Core\Registry

=============================
LANMAN WORKSTATION PARAMETERS
=============================
EnablePlainTextPassword  : 0
EnableSecuritySignature  : 1
RequireSecuritySignature : 0
ServiceDll               : C:\WINDOWS\System32\wkssvc.dll
ServiceDllUnloadOnStop   : 1
OtherDomains             : {}
SessTimeout              : 120
AuditSmb1Access          : 0
PSPath                   : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\
                           LanmanWorkstation\Parameters
PSParentPath             : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\
                           LanmanWorkstation
PSChildName              : Parameters
PSDrive                  : HKLM
PSProvider               : Microsoft.PowerShell.Core\Registry

=================
TCPIP4 PARAMETERS
=================
DataBasePath                 : C:\WINDOWS\System32\drivers\etc
Domain                       : 
ForwardBroadcasts            : 0
ICSDomain                    : mshome.net
IPEnableRouter               : 0
NameServer                   : 
SyncDomainWithMembership     : 1
HostName                     : Charles-Dell
NV HostName                  : Charles-Dell
EnableICMPRedirect           : 1
IPAutoconfigurationMask      : 0.0.0.0 
IPAutoconfigurationSubnet    : 0.0.0.0 
DhcpNameServer               : 192.168.1.1
SearchList                   : 
UseDomainNameDevolution      : 1
DeadGWDetectDefault          : 1
DontAddDefaultGatewayDefault : 0
PSPath                       : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi
                               ces\Tcpip\Parameters
PSParentPath                 : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi
                               ces\Tcpip
PSChildName                  : Parameters
PSDrive                      : HKLM
PSProvider                   : Microsoft.PowerShell.Core\Registry

=================
TCPIP6 PARAMETERS
=================
Dhcpv6DUID   : {0, 1, 0, 1...}
PSPath       : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Param
               eters
PSParentPath : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6
PSChildName  : Parameters
PSDrive      : HKLM
PSProvider   : Microsoft.PowerShell.Core\Registry

========================
SMB CLIENT CONFIGURATION
========================
ConnectionCountPerRssNetworkInterface : 4
DirectoryCacheEntriesMax              : 16
DirectoryCacheEntrySizeMax            : 65536
DirectoryCacheLifetime                : 10
DormantFileLimit                      : 1023
EnableBandwidthThrottling             : True
EnableByteRangeLockingOnReadOnlyFiles : True
EnableInsecureGuestLogons             : True
EnableLargeMtu                        : True
EnableLoadBalanceScaleOut             : True
EnableMultiChannel                    : True
EnableSecuritySignature               : True
ExtendedSessionTimeout                : 1000
FileInfoCacheEntriesMax               : 64
FileInfoCacheLifetime                 : 10
FileNotFoundCacheEntriesMax           : 128
FileNotFoundCacheLifetime             : 5
KeepConn                              : 600
MaxCmds                               : 50
MaximumConnectionCountPerServer       : 32
OplocksDisabled                       : False
RequireSecuritySignature              : False
SessionTimeout                        : 120
UseOpportunisticLocking               : True
WindowSizeThreshold                   : 8
PSComputerName                        : 

========================
SMB SERVER CONFIGURATION
========================
AnnounceComment                 : 
AnnounceServer                  : False
AsynchronousCredits             : 64
AuditSmb1Access                 : False
AutoDisconnectTimeout           : 15
AutoShareServer                 : True
AutoShareWorkstation            : True
CachedOpenLimit                 : 0
DurableHandleV2TimeoutInSeconds : 180
EnableAuthenticateUserSharing   : True
EnableDownlevelTimewarp         : False
EnableForcedLogoff              : True
EnableLeasing                   : True
EnableMultiChannel              : True
EnableOplocks                   : True
EnableSecuritySignature         : False
EnableSMB1Protocol              : True
EnableSMB2Protocol              : True
EnableStrictNameChecking        : True
EncryptData                     : False
IrpStackSize                    : 15
KeepAliveTime                   : 2
MaxChannelPerSession            : 32
MaxMpxCount                     : 50
MaxSessionPerConnection         : 16384
MaxThreadsPerQueue              : 20
MaxWorkItems                    : 1
NullSessionPipes                : 
NullSessionShares               : 
OplockBreakWait                 : 35
PendingClientTimeoutInSeconds   : 120
RejectUnencryptedAccess         : True
RequireSecuritySignature        : False
ServerHidden                    : True
Smb2CreditsMax                  : 2048
Smb2CreditsMin                  : 128
SmbServerNameHardeningLevel     : 0
TreatHostAsStableStorage        : False
ValidateAliasNotCircular        : True
ValidateShareScope              : True
ValidateShareScopeNotAliased    : True
ValidateTargetName              : True
PSComputerName                  : 

===============
IPCONFIG ALL
===============

Windows IP Configuration

   Host Name . . . . . . . . . . . . : Charles-Dell
   Primary Dns Suffix  . . . . . . . : 
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Ethernet:

   Connection-specific DNS Suffix  . : 
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : F0-4D-A2-3A-8B-E0
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::6813:6b51:6ced:2233%10(Preferred) 
   IPv4 Address. . . . . . . . . . . : 192.168.1.101(Preferred) 
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Thursday, October 4, 2018 2:55:34 PM
   Lease Expires . . . . . . . . . . : Friday, October 5, 2018 2:55:35 PM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 82857378
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-D0-EF-AD-F0-4D-A2-3A-8B-E0
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
    I know about mapping a network drive, but I would rather have my networking work as expected, i.e. have the NAS \\DLINK-019B49 device appear in Windows Explorer's Network section. Thanks.
      My Computer
    Quote Quote

  6. Eagle51
    Posts : 1,471
    Win10 Home x64 - 1809
       New #14

    Yes, this is always the same PC. Here's the latest output:

    I know about mapping a network drive, but I would rather have my networking work as expected, i.e. have the NAS \\DLINK-019B49 device appear in Windows Explorer's Network section. Thanks.
    K ... The script output looks ok to me. SMBv1 is installed/enable and the DependOnService looks correct. I'm not sure why it isn't showing up in File Explorer > Nework.

    Note:
    1. The only setting I see that I'm not familiar with is the Lanman Server > LmAnnounce : 0 ... I don't have that entry in my Lanman Server Parameters and I'm not sure what it does or if it's needed.
    2. If you want to try removing that key ... open regedit ... navigate to the following key ... delete the LmAnnounce key
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
      My Computers
    Quote Quote

  7. Eagle51
    Posts : 1,471
    Win10 Home x64 - 1809
       New #15

    Hey Blaq,
    I assumed your NAS is the Master Browser, but it might not be. Your router could be the Master Browser or another PC/Device. The CHARLES-DELL PC does not have an entry for MaintainServerList, so it's not trying to be the Master Browser and you may not need/want it to be, which is ok. Just need to find out which device is the Master Browser and you can use ... nbtstat -a devicename ... to see which PC/Device is the Master Browser.

    Open Command Prompt as Admin ...
    nbtstat -a DLINK-019B49

    Code:
    Example ... My router is the Master Browser (MS_BROWSE)
nbtstat -a eagle-ngr


           NetBIOS Remote Machine Name Table

       Name               Type         Status
    ---------------------------------------------
    EAGLE-NGR      <00>  UNIQUE      Registered
    EAGLE-NGR      <03>  UNIQUE      Registered
    EAGLE-NGR      <20>  UNIQUE      Registered
    ☺☻__MSBROWSE__☻<01>  GROUP       Registered
    WORKGROUP      <00>  GROUP       Registered
    WORKGROUP      <1D>  UNIQUE      Registered
    WORKGROUP      <1E>  GROUP       Registered
    Note: The MaintainServerList key is located at the following
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters

    Valid values for MaintainServerList are one of these ... Yes|No|Auto
      My Computers
    Quote Quote

  8. pbcopter
    Posts : 524
    Windows 11 Pro x64, Windows 10 Pro x64
       New #16

    Blaq said:
    Hey Eagle51,

    I ran your 4 commands and `sc.exe config mrxsmb10 start= auto` gave me an error 1060. I checked Control Panel and found that, out of the three SMBv1 Windows components, the SMB 1.0/CIFS Client was not enabled.

    I checked it, rebooted, and ran `sc.exe config mrxsmb10 start= auto`; it worked fine. I rebooted the PC and NAS and, in Windows Explorer > Network, I couldn't see the NAS even after refreshing.

    I was, however, able to enter "\\DLINK-019B49" in the address bar and make the NAS appear under Network; I remembered a tip from another forum and right-clicked to add \\ DLINK-019B49to the Quick Access area. It's a minor inconvenience, but at least I now have access to my NAS and can resume nightly backups.

    Do you have any suggestions how to make the NAS appear in Network without requiring me to click the Quick Access entry? It's not that I'm lazy, but thorough, and this behaviour indicates there is still something wrong with my networking. Thanks!
    I guess you decided not to try my suggestion.
      My Computers
    Quote Quote

  9. Blaq
    Posts : 35
    Windows 10
    Thread Starter
       New #17

    Hey, I'm back. Canadian Thanksgiving and all.

    • At this point, Windows Explorer > Network only shows my PC (CHARLES-DELL).
    • Entering "\\DLINK-019B49" in Windows Explorer's address bar makes the NAS appear in the Network section.
    • `net view` only lists my PC.
    • My network currently has:
      • RT-AC66U router
      • My PC (CHARLES-DELL)
      • D-Link DNS-325 NAS (DLINK-019B49)
      • Two Chromecasts
      • A printer


    I don't seem to be the Master Browser:
    Code:
    C:\Users\Charles>nbtstat -a CHARLES-DELL

Ethernet:
Node IpAddress: [192.168.1.101] Scope Id: []

    Host not found.

    Neither is the NAS:
    Code:
    C:\Users\Charles>nbtstat -a DLINK-019B49

Ethernet:
Node IpAddress: [192.168.1.101] Scope Id: []

           NetBIOS Remote Machine Name Table

       Name               Type         Status
    ---------------------------------------------
    DLINK-019B49   <00>  UNIQUE      Registered
    DLINK-019B49   <03>  UNIQUE      Registered
    DLINK-019B49   <20>  UNIQUE      Registered
    WORKGROUP      <1E>  GROUP       Registered
    WORKGROUP      <00>  GROUP       Registered

    MAC Address = 00-00-00-00-00-00

    As for the router, I can't be sure. Its SAMBA settings show the workgroup to be "MONKEYHOUSE" (which matches my PC) and device name to be "RT-AC66U-office". But when I try to list its name table:
    Code:
    C:\Users\Charles>nbtstat -a RT-AC66U-office

Ethernet:
Node IpAddress: [192.168.1.101] Scope Id: []

    Host not found.

    Finally, this.
    Code:
    C:\Users\Charles>nbtstat -n

Ethernet:
Node IpAddress: [192.168.1.101] Scope Id: []

                NetBIOS Local Name Table

       Name               Type         Status
    ---------------------------------------------
    CHARLES-DELL   <00>  UNIQUE      Registered
    MONKEYHOUSE    <00>  GROUP       Registered
    CHARLES-DELL   <20>  UNIQUE      Registered
    MONKEYHOUSE    <1E>  GROUP       Registered
    MONKEYHOUSE    <1D>  UNIQUE      Registered
    ☺☻__MSBROWSE__☻<01>  GROUP       Registered
    Does any of this give you any clues?
      My Computer
    Quote Quote

  10. Eagle51
    Posts : 1,471
    Win10 Home x64 - 1809
       New #18

    Hey blaq,
    It appears that your NAS is on the wrong workgroup. It's showing (WORKGROUP) and it should be (MONKEYHOUSE), since that's the workgroup your router and PC are using. I think you need fix that before doing anything else.

    Note:
    1. Right now CHARLES-DELL is the Master Browser. I think once you fix your NAS workgroup issue, the NAS will become the Master Browser and show up in File Explorer > Network.
    2. Your router would only be the Master Browser, if you're using your routers USB File Share (i.e. have USB HDD connected) and have it turned on & configured.


    UPDATE: I'm pretty sure you do have the MaintainServerList Key, but I found an a typo in my script so it was showing you didn't have one ... sorry about ...
    Last edited by Eagle51; 09 Oct 2018 at 19:40.
      My Computers
    Quote Quote

  12. Eagle51
    Posts : 1,471
    Win10 Home x64 - 1809
       New #19

    UPDATE:
    I was wondering why my script was NOT showing a MaintainServerList key for you, when it should since you have SMBv1 installed/enable ... I found a typo in my script

    FIXED SCRIPT:
    Code:
    Note: The following script ....
1. Makes NO changes to your PC (For information only)
2. Only shows PC NAME (Does NOT reveal any personal info)
3. It creates a .txt file on your Desktop (Assumes your Desktop Folder has NOT been moved)
4. Upload the .txt file in your post if you need help with the output.

Open PowerShell as Admin. Copy/Paste the following, making sure to hit enter after the last line.

$(
write-output "CHECKING SMB FOR COMPUTER $($env:computername) @ $(get-date -format g)"
if((Get-WindowsOptionalFeature -Online -FeatureName SMB1Protocol).State -eq "Enabled" -OR (Get-WindowsOptionalFeature -Online -FeatureName SMB1Protocol-Client).State -eq "Enabled" -OR (Get-WindowsOptionalFeature -Online -FeatureName SMB1Protocol-Server).State -eq "Enabled" -OR (Get-WindowsOptionalFeature -Online -FeatureName SMB1Protocol-Deprecation).State -eq "Enabled") {
write-output "==================="
write-output "SMB1 FEATURES"
write-output "==================="
$scq10 = (sc.exe query mrxsmb10 | FINDSTR "SERVICE_NAME STATE")
$scqc10 = (sc.exe qc mrxsmb10 | FINDSTR "START_TYPE")
$scqb = (sc.exe query browser | FINDSTR "SERVICE_NAME STATE")
$scqcb = (sc.exe qc browser | FINDSTR "START_TYPE")
get-windowsoptionalfeature -Online -FeatureName SMB1Protocol | FINDSTR "FeatureName"
get-windowsoptionalfeature -Online -FeatureName SMB1Protocol | FINDSTR "State"
get-windowsoptionalfeature -Online -FeatureName SMB1Protocol-Client | FINDSTR "FeatureName"
get-windowsoptionalfeature -Online -FeatureName SMB1Protocol-Client | FINDSTR "State"
get-windowsoptionalfeature -Online -FeatureName SMB1Protocol-Server | FINDSTR "FeatureName"
get-windowsoptionalfeature -Online -FeatureName SMB1Protocol-Server | FINDSTR "State"
get-windowsoptionalfeature -Online -FeatureName SMB1Protocol-Deprecation  | FINDSTR "FeatureName"
get-windowsoptionalfeature -Online -FeatureName SMB1Protocol-Deprecation | FINDSTR "State"
write-output " "
write-output "==================="
write-output "SMB PROTOCOLS"
write-output "==================="
get-smbserverconfiguration | Select EnableSMB1Protocol,EnableSMB2Protocol | FORMAT-LIST
} else {
write-output " "
write-output "==================="
write-output "SMB PROTOCOLS"
write-output "==================="
$scq10 = ""
$scqc10 = ""
$scqb = ""
$scqcb = ""
write-output "EnableSMB1Protocol : False"
get-smbserverconfiguration | Select EnableSMB2Protocol | FORMAT-LIST
}
write-output " "
write-output "=================="
write-output "SERVICES"
write-output "=================="
$scq10
$scqc10
$scqb
$scqcb
sc.exe query mrxsmb20 | FINDSTR "SERVICE_NAME STATE"
sc.exe qc mrxsmb20 | FINDSTR "START_TYPE"
sc.exe query fdphost | FINDSTR "SERVICE_NAME STATE"
sc.exe qc fdphost | FINDSTR "START_TYPE"
sc.exe query fdrespub | FINDSTR "SERVICE_NAME STATE"
sc.exe qc fdrespub | FINDSTR "START_TYPE"
sc.exe query ssdpsrv | FINDSTR "SERVICE_NAME STATE"
sc.exe qc ssdpsrv | FINDSTR "START_TYPE"
sc.exe query upnphost | FINDSTR "SERVICE_NAME STATE"
sc.exe qc upnphost | FINDSTR "START_TYPE"
sc.exe query dhcp | FINDSTR "SERVICE_NAME STATE"
sc.exe qc dhcp | FINDSTR "START_TYPE"
sc.exe query dnscache | FINDSTR "SERVICE_NAME STATE"
sc.exe qc dnscache | FINDSTR "START_TYPE"
sc.exe query iphlpsvc | FINDSTR "SERVICE_NAME STATE"
sc.exe qc iphlpsvc | FINDSTR "START_TYPE"
sc.exe query lmhosts | FINDSTR "SERVICE_NAME STATE"
sc.exe qc lmhosts | FINDSTR "START_TYPE"
sc.exe query lanmanserver | FINDSTR "SERVICE_NAME STATE"
sc.exe qc lanmanserver | FINDSTR "START_TYPE"
sc.exe query lanmanworkstation | FINDSTR "SERVICE_NAME STATE"
sc.exe qc lanmanworkstation | FINDSTR "START_TYPE"
write-output " "
write-output "================="
write-output "SMB REGISTRY KEYS"
write-output "================="
if (Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters -Name SMB1 -ErrorAction SilentlyContinue) {
Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters -Name SMB1 | FORMAT-LIST -Property SMB1
} else {
write-output "NO SMB1 KEY"
}
if (Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters -Name SMB2 -ErrorAction SilentlyContinue) {
Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters -Name SMB2 | FORMAT-LIST -Property SMB2
} else {
write-output "NO SMB2 KEY"
}
if (Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\LanmanWorkstation -Name DependOnService -ErrorAction SilentlyContinue) {
Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\LanmanWorkstation -Name DependOnService | FORMAT-LIST -Property DependOnService
} else {
write-output "NO DEPEND ON SERVICE"
}
if (Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\Browser\Parameters -Name MaintainServerList -ErrorAction SilentlyContinue) {
Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\Browser\Parameters | FORMAT-LIST -Property MaintainServerList
} else {
write-output "NO BROWSER MAINTAIN SERVER LIST KEY"
}
write-output " "
write-output "========================"
write-output "LANMAN SERVER PARAMETERS"
write-output "========================"
Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
write-output "============================="
write-output "LANMAN WORKSTATION PARAMETERS"
write-output "============================="
Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters
write-output "================="
write-output "TCPIP4 PARAMETERS"
write-output "================="
Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
write-output "================="
write-output "TCPIP6 PARAMETERS"
write-output "================="
Get-ItemProperty -Path HKLM:SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters
write-output "========================"
write-output "SMB CLIENT CONFIGURATION"
write-output "========================"
Get-SmbClientConfiguration
write-output "========================"
write-output "SMB SERVER CONFIGURATION"
write-output "========================"
Get-SmbServerConfiguration
write-output "==============="
write-output "IPCONFIG ALL"
write-output "==============="
ipconfig /all
) > "$($env:userprofile)\Desktop\$env:computername-SMB-CHECK.txt"
      My Computers
    Quote Quote

  13. Blaq
    Posts : 35
    Windows 10
    Thread Starter
       New #20

    Hey Eagle,

    I ran your updated script:
    Code:
    CHECKING SMB FOR COMPUTER CHARLES-DELL @ 10/10/2018 7:43 AM
===================
SMB1 FEATURES
===================
FeatureName      : SMB1Protocol
State            : Enabled
FeatureName      : SMB1Protocol-Client
State            : Enabled
FeatureName      : SMB1Protocol-Server
State            : Enabled
FeatureName      : SMB1Protocol-Deprecation
State            : Enabled
 
===================
SMB PROTOCOLS
===================


EnableSMB1Protocol : True
EnableSMB2Protocol : True



 
==================
SERVICES
==================
SERVICE_NAME: mrxsmb10 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: browser 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: mrxsmb20 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: fdphost 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START  (DELAYED)
SERVICE_NAME: fdrespub 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START  (DELAYED)
SERVICE_NAME: ssdpsrv 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START  (DELAYED)
SERVICE_NAME: upnphost 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START  (DELAYED)
SERVICE_NAME: dhcp 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: dnscache 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: iphlpsvc 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: lmhosts 
        STATE              : 4  RUNNING 
        START_TYPE         : 3   DEMAND_START
SERVICE_NAME: lanmanserver 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
SERVICE_NAME: lanmanworkstation 
        STATE              : 4  RUNNING 
        START_TYPE         : 2   AUTO_START
 
=================
SMB REGISTRY KEYS
=================
NO SMB1 KEY
NO SMB2 KEY


DependOnService : {bowser, mrxsmb10, mrxsmb20, nsi}





MaintainServerList : Yes



 
========================
LANMAN SERVER PARAMETERS
========================


ServiceDll                    : C:\WINDOWS\system32\srvsvc.dll
ServiceDllUnloadOnStop        : 1
CachedOpenLimit               : 0
EnableAuthenticateUserSharing : 1
EnableForcedLogoff            : 1
EnableSecuritySignature       : 0
LmAnnounce                    : 0
NullSessionPipes              : {}
RequireSecuritySignature      : 0
RestrictNullSessAccess        : 1
Size                          : 1
SrvComment                    : Charles-Dell
Guid                          : {70, 62, 77, 168...}
PSPath                        : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Service
                                s\LanmanServer\Parameters
PSParentPath                  : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Service
                                s\LanmanServer
PSChildName                   : Parameters
PSDrive                       : HKLM
PSProvider                    : Microsoft.PowerShell.Core\Registry

=============================
LANMAN WORKSTATION PARAMETERS
=============================
EnablePlainTextPassword  : 0
EnableSecuritySignature  : 1
RequireSecuritySignature : 0
ServiceDll               : C:\WINDOWS\System32\wkssvc.dll
ServiceDllUnloadOnStop   : 1
OtherDomains             : {}
SessTimeout              : 120
AuditSmb1Access          : 0
PSPath                   : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Lan
                           manWorkstation\Parameters
PSParentPath             : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Lan
                           manWorkstation
PSChildName              : Parameters
PSDrive                  : HKLM
PSProvider               : Microsoft.PowerShell.Core\Registry

=================
TCPIP4 PARAMETERS
=================
DataBasePath                 : C:\WINDOWS\System32\drivers\etc
Domain                       : 
ForwardBroadcasts            : 0
ICSDomain                    : mshome.net
IPEnableRouter               : 0
NameServer                   : 
SyncDomainWithMembership     : 1
HostName                     : Charles-Dell
NV HostName                  : Charles-Dell
EnableICMPRedirect           : 1
IPAutoconfigurationMask      : 0.0.0.0 
IPAutoconfigurationSubnet    : 0.0.0.0 
DhcpNameServer               : 192.168.1.1
SearchList                   : 
UseDomainNameDevolution      : 1
DeadGWDetectDefault          : 1
DontAddDefaultGatewayDefault : 0
PSPath                       : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
                               \Tcpip\Parameters
PSParentPath                 : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
                               \Tcpip
PSChildName                  : Parameters
PSDrive                      : HKLM
PSProvider                   : Microsoft.PowerShell.Core\Registry

=================
TCPIP6 PARAMETERS
=================
Dhcpv6DUID   : {0, 1, 0, 1...}
PSPath       : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Paramete
               rs
PSParentPath : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6
PSChildName  : Parameters
PSDrive      : HKLM
PSProvider   : Microsoft.PowerShell.Core\Registry

========================
SMB CLIENT CONFIGURATION
========================
ConnectionCountPerRssNetworkInterface : 4
DirectoryCacheEntriesMax              : 16
DirectoryCacheEntrySizeMax            : 65536
DirectoryCacheLifetime                : 10
DormantFileLimit                      : 1023
EnableBandwidthThrottling             : True
EnableByteRangeLockingOnReadOnlyFiles : True
EnableInsecureGuestLogons             : True
EnableLargeMtu                        : True
EnableLoadBalanceScaleOut             : True
EnableMultiChannel                    : True
EnableSecuritySignature               : True
ExtendedSessionTimeout                : 1000
FileInfoCacheEntriesMax               : 64
FileInfoCacheLifetime                 : 10
FileNotFoundCacheEntriesMax           : 128
FileNotFoundCacheLifetime             : 5
KeepConn                              : 600
MaxCmds                               : 50
MaximumConnectionCountPerServer       : 32
OplocksDisabled                       : False
RequireSecuritySignature              : False
SessionTimeout                        : 120
UseOpportunisticLocking               : True
WindowSizeThreshold                   : 8
PSComputerName                        : 

========================
SMB SERVER CONFIGURATION
========================
AnnounceComment                 : 
AnnounceServer                  : False
AsynchronousCredits             : 64
AuditSmb1Access                 : False
AutoDisconnectTimeout           : 15
AutoShareServer                 : True
AutoShareWorkstation            : True
CachedOpenLimit                 : 0
DurableHandleV2TimeoutInSeconds : 180
EnableAuthenticateUserSharing   : True
EnableDownlevelTimewarp         : False
EnableForcedLogoff              : True
EnableLeasing                   : True
EnableMultiChannel              : True
EnableOplocks                   : True
EnableSecuritySignature         : False
EnableSMB1Protocol              : True
EnableSMB2Protocol              : True
EnableStrictNameChecking        : True
EncryptData                     : False
IrpStackSize                    : 15
KeepAliveTime                   : 2
MaxChannelPerSession            : 32
MaxMpxCount                     : 50
MaxSessionPerConnection         : 16384
MaxThreadsPerQueue              : 20
MaxWorkItems                    : 1
NullSessionPipes                : 
NullSessionShares               : 
OplockBreakWait                 : 35
PendingClientTimeoutInSeconds   : 120
RejectUnencryptedAccess         : True
RequireSecuritySignature        : False
ServerHidden                    : True
Smb2CreditsMax                  : 2048
Smb2CreditsMin                  : 128
SmbServerNameHardeningLevel     : 0
TreatHostAsStableStorage        : False
ValidateAliasNotCircular        : True
ValidateShareScope              : True
ValidateShareScopeNotAliased    : True
ValidateTargetName              : True
PSComputerName                  : 

===============
IPCONFIG ALL
===============

Windows IP Configuration

   Host Name . . . . . . . . . . . . : Charles-Dell
   Primary Dns Suffix  . . . . . . . : 
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Ethernet:

   Connection-specific DNS Suffix  . : 
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : F0-4D-A2-3A-8B-E0
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::6813:6b51:6ced:2233%10(Preferred) 
   IPv4 Address. . . . . . . . . . . : 192.168.1.101(Preferred) 
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Tuesday, October 9, 2018 5:23:23 PM
   Lease Expires . . . . . . . . . . : Thursday, October 11, 2018 5:23:20 AM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 82857378
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-D0-EF-AD-F0-4D-A2-3A-8B-E0
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
    I had changed both routers' workgroup to MONKEYHOUSE after my last reply. At this point, I forced my main router to be the master browser. (USB Application > Media Services and Servers > Network Place (Samba) Share / Cloud Disk tab > Force as Master Browser) I already had the Samba share active, although nothing was being shared and no USB disk connected.

    A few minutes later:
    Code:
    PS C:\WINDOWS\system32> nbtstat -a RT-AC66U-office

Ethernet:
Node IpAddress: [192.168.1.101] Scope Id: []

           NetBIOS Remote Machine Name Table

       Name               Type         Status
    ---------------------------------------------
    RT-AC66U-OFFICE<00>  UNIQUE      Registered
    RT-AC66U-OFFICE<03>  UNIQUE      Registered
    RT-AC66U-OFFICE<20>  UNIQUE      Registered
    ☺☻__MSBROWSE__☻<01>  GROUP       Registered
    MONKEYHOUSE    <1E>  GROUP       Registered
    MONKEYHOUSE    <00>  GROUP       Registered
    MONKEYHOUSE    <1D>  UNIQUE      Registered
    MONKEYHOUSE    <1B>  UNIQUE      Registered

    MAC Address = 00-00-00-00-00-00
    • The router is now the master browser. Yay!
    • Refreshing Windows Explorer > Network on my PC now shows "RT-AC66U-OFFICE" as a computer.
    • DLINK-019B49 still doesn't show in Network.


    What should I do next to get the NAS to appear in Network?

    Your continued help is very much appreciated.
      My Computer
    Quote Quote

 

  Related Discussions
Skype for Business (SFB) keeps starting on startup. Internet research told me to get into startup options from O/S level and de-select SFB. Done, but did not fix the problem. Next, I found I was to navigate via tools/tools/options to the...
I know this can be done and I do recall back in 2017 I was reading about this. However there is no possibility to know where exactly I found this two years back. Just like title says, I want to replace common CIDs used post-Vista to open / browse...
Hello, I owned an ASUSTeK COMPUTER INC. - E403SA since July 2018. From the beginning of its usage, I used to loose my internet connection but I did not consider it as something unusual as it is a very cheap laptop and I put the blame on its wifi...
My small LAN consists of only 2 PCs, my desktop and my notebook, both running Windows 10 Home. There are also various Apple devices, an Amazon device, some home security devices, and an ASUS RT-N56U router. Three days ago, I installed Windows 10...
Hi there just another little annoyance on Networking from Ms. Hidden away in small print on the Ms site is this : ....Windows 10 Home and Windows 10 Professional still contain the SMBv1 client by default after a clean installation. If the...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 19:29.
Find Us




Windows 10 Forums