Wifi looses connection after 1803 upgrade

Page 3 of 3 FirstFirst 123
  1. Caledon Ken's Avatar
    Posts : 20,304
    Windows 10 Pro x64 Version 1909
       #21

    Okay some additional things to check.

    In device manager open device, click on properties, power management tab, uncheck allow computer to turn off device to save power.


    In advance power setting open Wireless Adapter. Set all to maximum performance

    Right click Start > Power Options > Additional Power Settings on right > Change Plan Settings for plan that is active > Change Advance Power Settings > Wireless adapter settings.


    With regards to IPv6 did you try prefer IPv4 or outright disable. Might try outright disable.


    Going a little further outside box, does your router have any firmware updates outstanding?

    While this is very well related to 1803 do you live in an area where other wireless signals are within range? Have you tried a different channel on your router?
      My Computer

  2. Steven Campoli's Avatar
    Posts : 1,046
    Windows 10 Pro x64
    Thread Starter
       #22

    Yes it is related to the 1803 update because it only started then

    I have tried all your tip except for ip6 thing u wrote

    How do I do this? Do u recommend this?

    I don’t have a router it’s my bell modem, only since the update I have this issue.
      My Computers

  3. Caledon Ken's Avatar
    Posts : 20,304
    Windows 10 Pro x64 Version 1909
       #23

    In that link I originally posted was a link to disable IPv6 for tunneled and non tunneled

    Can't hurt as you will just use another link on lower line to enable.

    Wifi looses connection after 1803 upgrade-image.png


    You didn't answer about other wifi networks in area. Agree it likely is the update but someone may have gotten a new network same time. Have you tried new channel.

    Your router, does it support 2.4 and 5Ghz. Are you using the 2.4 or 5Ghz?

    What security protocol are you using. The old Bell devices (2701G's), which I still find, default to WEP.
      My Computer

  4. Steven Campoli's Avatar
    Posts : 1,046
    Windows 10 Pro x64
    Thread Starter
       #24

    Caledon Ken said:
    In that link I originally posted was a link to disable IPv6 for tunneled and non tunneled

    Can't hurt as you will just use another link on lower line to enable.

    Wifi looses connection after 1803 upgrade-image.png


    You didn't answer about other wifi networks in area. Agree it likely is the update but someone may have gotten a new network same time. Have you tried new channel.

    Your router, does it support 2.4 and 5Ghz. Are you using the 2.4 or 5Ghz?

    What security protocol are you using. The old Bell devices (2701G's), which I still find, default to WEP.
    I went to the link you provided.
    which option do i download?
      My Computers

  5. Caledon Ken's Avatar
    Posts : 20,304
    Windows 10 Pro x64 Version 1909
       #25

    I would download the top two. The "Disables"
      My Computer


 

Related Threads
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:03.
Find Us




Windows 10 Forums