Folder/Drive sharing fubarred after 1803 upgrade...

Page 3 of 3 FirstFirst 123

  1. Posts : 1,020
    Windows 10 Pro 20H2 19042.572
       #21

    Access Denied said:
    Yes. If turning SMBv1 off, you will need the service on auto delayed start for it to work. With SMBv1 on, it will work just fine on manual.

    I actually have SMBv1 turned on for one of my PC. If I stop the FDRP service, it disappears from the other PC's Network browsing. I think SMBv1 actually makes the service run where as it does not run properly when you turn off SMBv1.
    I just tried it and yes I can see the other systems, but when I tried to access them, I kept receiving a "No Network Path" error message. Probably requires more trouble shooting than I wanted to do. Also, my NAS storage was un-seen as well as my ReadyShare (Router storage). I assume I could make them into Network Drives ? Since I need to be visible so that I can continue to save the Security images that the cameras create, I'll be switching back and activate SMBv1.
      My Computers


  2. Posts : 4,193
    Windows 10 Pro x64 Latest RP
       #22

    @storageman

    Although I agree fully with @Access Denied there is one caveat - if you are connecting to some "older" Linux distros or devices with embedded Linux systems, (TVs, Media Centres, Etc), you may have issues connecting without SMBv1
      My Computers


  3. Posts : 1,020
    Windows 10 Pro 20H2 19042.572
       #23

    Barman58 said:
    @storageman

    Although I agree fully with @Access Denied there is one caveat - if you are connecting to some "older" Linux distros or devices with embedded Linux systems, (TVs, Media Centres, Etc), you may have issues connecting without SMBv1
    Well maybe this is were I'm confused. The NAS box is new (less than 2 months old) and has to be Linux based (looking at what is installed on it), so its not old, but its not seen by any of my W10 systems when SMBv1 is disabled. Maybe they are all behind the times I don't know ?

    Thanks for commenting.
      My Computers


  4. Posts : 4,193
    Windows 10 Pro x64 Latest RP
       #24

    SMB is a Microsoft software specifically to interface with the old UNIX systems. the original ones in UNIX/Linux do not have the vulnerability of the microsoft software so is still in use.

    Of course the majority of the changes needed in SMBv1 were already built in to Windows 10 and there was one minor addition by update when the wannacry hit, so running it on windows 10 is no longer a high risk - indeed it was those places that ignored their update schedules, and were running XP and upatched Win7 that were hit
      My Computers


  5. Posts : 1
    Windows 10
       #25

    Access Denied said:
    You need to set two services to automatic (delayed start):

    Function Discovery Provider Host
    Function Discovery Resource Publication

    Right click Start, click on Run towards the bottom. type services.msc in the Run box and press enter to open the Services List. Scroll down until you find those two. Set them to automatic (delayed start). Then right click and start them both. That PC will now show up. Do this on each of your PC. Then your network will display as you like.

    Hope this helps. :)
    YOU ARE THE MAN!!

    Thank you, Thank you, Thank you.. I was going crazy after the 1803 Update. I can now see all PC's on my network again in Explorer.
      My Computer


  6. Posts : 668
    Win 10 pro
       #26

    Access Denied said:
    You need to set two services to automatic (delayed start):

    Function Discovery Provider Host
    Function Discovery Resource Publication

    Right click Start, click on Run towards the bottom. type services.msc in the Run box and press enter to open the Services List. Scroll down until you find those two. Set them to automatic (delayed start). Then right click and start them both. That PC will now show up. Do this on each of your PC. Then your network will display as you like.

    Hope this helps. :)
    This worked, thanks.

    Is there a powershell/cmd way to enable it? It is very difficult to search those service in a different language in service
      My Computer


  7. Posts : 1,471
    Win10 Home x64 - 1809
       #27

    Hey roy111,
    Command Prompt as Admin
    sc config fdphost start= delayed-auto
    sc config fdrespub start= delayed-auto
      My Computers


  8. Posts : 668
    Win 10 pro
       #28

    Eagle51 said:
    Hey roy111,
    Command Prompt as Admin
    sc config fdphost start= delayed-auto
    sc config fdrespub start= delayed-auto
    awesome, thanks!
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:11.
Find Us




Windows 10 Forums