1.    29 Jul 2015 #1
    Join Date : Jul 2015
    Posts : 2
    Windows 8.1

    Windows 10 Upgrade Failure - 0xC1900101 - 0x30018


    Hey guys,

    I've been having a problem with upgrading to Windows 10. I've tried using the tool both by running it on my PC and putting it on a USB. It gets through the first part of copying files and does the first reboot, then it starts back to the screen and the Installing Features and Drivers sits at 0% for a few seconds then resets and restores my old version with this error:

    0xC1900101 - 0x30018 - The installation failed in the FIRST_BOOT phase with the error during SYSPREP operation.

    When I originally looked this error up I read that it might be an encryption error so I decrypted both of my drives, ran the install again.. Same error. So now I am at a complete loss as to what to do so I can get myself upgraded.

    System:

    Windows 8.1 Pro x64
    Mobo: ASUS ROG Maximus VII Hero
    PCU: Intel i7 4790k 4.00 GHz
    GPU: ASUS ROG MARS760x2 (2 GTX 760 chips on one card)
    RAM: 16GB DDR3

    Please let me know if you have any info or advice as to how I can fix or workaround this issue.

    Thanks,

    Hoffmann
    Last edited by Hoffmann; 29 Jul 2015 at 23:48.
      My ComputerSystem Spec
  2.    30 Jul 2015 #2
    Join Date : Jul 2015
    Posts : 2
    windows 8.1 pro

    I am having exactly the same problem, I am installing from USB onto Windows 8.1 Pro, as the administrator (local) outside of the normal domain. It gives no warning of this error until it has been through most of the install, I have tried multiple times same issue occurs.
      My ComputerSystem Spec
  3.    30 Jul 2015 #3
    Join Date : Jul 2015
    Posts : 2
    Windows 8.1
    Thread Starter

    Quote Originally Posted by Disaster 84 View Post
    I am having exactly the same problem, I am installing from USB onto Windows 8.1 Pro, as the administrator (local) outside of the normal domain. It gives no warning of this error until it has been through most of the install, I have tried multiple times same issue occurs.
    Sorry just got back home a few minutes ago.

    I was told this is a driver issue and was able to fix it by uninstalling a few programs that start when my PC loads. Anti-Virus, AVG PC Tuneup, Spyshelter..

    Not sure which one fixed it as I uninstalled them all, afterwards the setup was good.
      My ComputerSystem Spec
  4.    30 Jul 2015 #4
    Join Date : Jul 2015
    Posts : 2
    windows 8.1 pro

    I have tried to do the same but no avail, no matter the option i choose I can't get past this error?

    Hmmmmmm, anyone have another suggestion?
      My ComputerSystem Spec
  5.    26 Dec 2015 #5
    Join Date : Dec 2015
    Posts : 1
    w10

    Solved


    This worked for me:

    Download the windows 10 media onto a USB memory stick

    Turn off Windows Defender, any Wifi , disable firewall

    Install windows 10 from the USB memory stick

    Say no to "check for updates" untill after the W10 installation has completed
      My ComputerSystem Spec
  6.    26 Jun 2016 #6
    Join Date : Jun 2016
    Posts : 1
    Windows 10

    Tune up removal helps I think


    Quote Originally Posted by Hoffmann View Post
    Sorry just got back home a few minutes ago.

    I was told this is a driver issue and was able to fix it by uninstalling a few programs that start when my PC loads. Anti-Virus, AVG PC Tuneup, Spyshelter..

    Not sure which one fixed it as I uninstalled them all, afterwards the setup was good.
    I removed AVG PC Tune UP and all antivirus that were in the systems. It seems that was obstructing. Now using Windows 10
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Solved Windows 10 Error code 0xc1900101-0x30018
Upgrading a Windows 8.1 installation and it stuck at getting devices ready at 2%. No BSOD. Has to be specific to 8.1 as I have already installed 10 on a clean partition with no issues on this machine. All drivers up to date. Did try removing Avast....
Installation and Upgrade
Solved First failure to upgrade on any of my computers.
I have been on the Win 10 fast track with four computers since the start. All upgrades have been successful until 10240 fails to upgrade on my Lenovo Yoga 2 laptop. It gets to about 19 percent and then reverts back to build 10166. I noticed a safe...
General Support
failure configuring windows updates, and reverts to win 8
Cliff S I have been running win 8 for a longtime, and ran win 8.1 for months without any problems, then got a virus, and could not get rid of it, so went back to win 8. Now when I try to reload win 8.1 it says "failure configuring windows updates,...
Windows Updates and Activation
Windows 10 upgrade error 0xc1900101-0x30018 is back.
Don't know what program/driver/windows update is causing it. This could be an issue for upgrading. There is one other method I haven't tried. See, Microsoft wants you to upgrade to the free version. Looks more like I will be sticking...
Installation and Upgrade
Indtallation failed with 0xC1900101-0x30017, DP500A2D Samsung AIO.
I am running Samsung Series 5 AIO DP500A2D-K01UB PC running Winows 10 TP build 9841. I could not install lastest Windows 10 TP build 9926. Upgrading itself appeared to work fine. Upon reboot, I had no display after setting up 100%. After several...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 15:17.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums