1.    1 Week Ago #1
    Join Date : Oct 2014
    Posts : 928
    Windows 8.1, Win10Pro

    Clean-Install needed


    I think I already know the answers to my question -- but I wanted to check with the Experts here before I attempt this and ruin a working PC. (NOTE: This is my wife's PC, and she will KILL me if I mess it up!)

    I have an old Win10 desktop (upgraded from Win7) that is NOW failing the recent KB update over and over -- and I want to do a clean-install from the latest Win10 media.

    There are some catches, though ...

    First, the PC is running 32-bit and I want to replace that with 64-bit. It has a 64-bit processor and is only running 32-bit because the previous motherboard failed and I migrated this to a new motherboard using Macrium Reflect and, at the time, did not want to go through the grief of reinstalling. So, this PC is activated using Win10 -- but if I install 64-bit install, that should still activate OK, right?

    Second, the PC already has two physical drives in it, with no room to mount a third, so I want to put the new Win10 install on the same SSD as the existing one by clearing out a data partition and making some space. So, when I do that, realizing that the installation will update the boot information in the existing System Reserved partition (it is using BIOS, not UEFI), nonetheless, it should not touch the existing Win10 32-bit installation, right?

    My thoughts around doing it this way is to have both the old 32-bit and new 64-bit installations working for a short while so I can carefully migrate stuff from the old to the new. And, yeah I know that I will have to reinstall all the apps again, but I'm more concerned about being able to migrate the settings and data.

    Once I get the 64-bit version working OK, I will erase the 32-bit version and recover the disk space -- as I have an MR image of it to keep.

    Since this was an Upgrade, and I have an image of the Win7 32-bit installation, should I go the extra mile to restore that and use it to generate the genuineticket.xml file, just in case the activation of the 64-bit installation does not take?

    And finally, since the FCU comes out in a few days, can I use the ISOs I already made of build 16299.15 (from my Insider machine) to do this installation? Or, should I install from the last release and just upgrade on the 17th?

    Anything else I might have missed?
      My ComputerSystem Spec
  2.    1 Week Ago #2
    Join Date : Jun 2014
    UK
    Posts : 1,003
    W10 pro x86 and W10 x86

    Activation doesn't care whether you chop and change between 32 or 64 bit. There should be no issues there. However you can not upgrade a 32 bit to 64 bit or vice versa. You have to clean install to make the change.

    It seems pointless to clean install now, only to upgrade in a few days time. I would just wait, and that means wait until the official consumer release appears. No point guessing whether the latest Insider build will or will not be the same as the final release.

    Do it right and do it just the once

    (and if you have only 4Gb or less then the 32 bit version could win out at the end of the day. You gain in some areas and lose in others.)
      My ComputerSystem Spec
  3.    1 Week Ago #3
    Join Date : Oct 2014
    Posts : 928
    Windows 8.1, Win10Pro
    Thread Starter

    Thanks ... but I need to know if installing a 64-bit version of Win10 to another partition on the SSD is going to mess with the existing 32-bit install in any way. Because if it is, then I need to find a way to install to a different disk.
      My ComputerSystem Spec
  4.    1 Week Ago #4
    Join Date : Aug 2016
    S/E England
    Posts : 4,114
    10 Home x64 (1709) (10 Pro on 2nd pc)

    Others have tried dual-booting 32 & 64 bit, apparently it can be done. here's one...


    Dual boot Windows 10 32 bit and Windows 10 64 bit

    Personally I'd avoid it, my backup plan would be to make an image of the existing 32-bit system with something like Macrium Reflect (free) as your 'fall-back' option then do a clean install of 64-bit.

    BTW, I run 64-bit in 4GB of RAM with no apparent downside. Even seems to work fine when I test using it without a swapfile (though I wouldn't recommend that, I was just curious as to how it would perform).
      My ComputersSystem Spec
  5.    1 Week Ago #5
    Join Date : Oct 2014
    Posts : 928
    Windows 8.1, Win10Pro
    Thread Starter

    It's not my intention to keep both the 32-bit and 64-bit versions around for a long time -- just long enough to migrate everything onto the 64-bit install.
      My ComputerSystem Spec
  6.    1 Week Ago #6
    Join Date : Jul 2015
    Posts : 9,144
    Windows 10 Pro

    You shouldn't have any issues dual booting temporarily. I've set up computers that way when the old Windows got corrupted. It's a good idea to turn off Windows 10 Fast Startup when dual booting:
    Turn On or Off Fast Startup in Windows 10 Performance Maintenance Tutorials

    Personally, I like to just turn off hibernation with:
    powercfg -h off

    which also disables fast startup.
      My ComputerSystem Spec
  7.    6 Days Ago #7
    Join Date : Jul 2014
    San Jose, California
    Posts : 2,057
    Ubuntu14.04x64 MintMate17x64 Win10Prox64

    If it were my PC. Here's what I would do:
    1. Move all personal data to second disk.
    2. Make a backup image of of current 32 bit Windows and save it to second disk.
    3. Wipe out completely the first disk then fresh install Windows 10 64 bit.
      Reason: Since you upgraded from Windows 7 which has 100MB Reserved partition and probably one or more 450MB Recovery partition(s). Here's a chance to make Windows 10 disk partitions correctly with only 500MB Reserved System partition and C drive.
    4. Once done, shrink C drive with enough space to copy your old C-drive (Windows 32 bit) using Macrium. Macrium will automatically assign a new drive letter for your old 32bit C-Drive. e.g. D or E.
    5. Boot up Windows 10 64bit, open the admin command prompt and type:
      bcdboot E:\Windows ======> Assuming E was assigned in step 4
      This will setup dual boot for both Windows 64/32 bit
    6. Your final disk layout should correctly have:
      500MB Systen reserved, C drive (64bit Windows), E drive (32bit Windows) ===> Assuming E was assigned to the 32 bit Windows.
    7. Once you are happy with new install of Windows 64 bit. Run MsConfig to remove the dual boot of 32 bit then delete the old 32 bit Windows.
      My ComputerSystem Spec
  8.    6 Days Ago #8
    Join Date : Oct 2014
    Posts : 928
    Windows 8.1, Win10Pro
    Thread Starter

    Hey folks, thanks for all the advice!
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Solved Which product key is needed for clean install of windows
Hello, I'm in the process of backing up data and product keys for a fresh install of Windows. Upon digging on google for how to find your windows product key, I found several ways to find it. My HP has a COA sticker with a Windows 7 product key. I...
Installation and Upgrade
If clean install is needed
Hi I bought a windows 10 laptop removed the drive and fitted SSD drive cloned the original drive,what would happen if for any reason I had to reinstall windows 10 i dont have a product key! Would I need a product key?do i need to keep the original...
Installation and Upgrade
Errors persisting in windows 10 even after clean install. Help needed!
I have been having these errors right after the upgrade. Once I did a clean install still having these same errors! I did sfc scan and says there is no problem at all. Can you guys kindly take a look and see if you have a solution or any idea...
General Support
Clean install help needed; Windows 7 OEM to Windows 10
Hi everybody; I downloaded the ISO for Windows 10 Home 32/64 bit and tried to do a clean install but it didn't accept my Windows 7 OEM key. Any idea anyone? I really do not like upgrades, always do clean install. Henk
Installation and Upgrade
W10 inaccessible_boot_device after clean clean install 0xc000000f Err
When I upgraded to windows 10 from windows 7, it worked fine for the next few hours then i couldnt acess the log in screen it was just stuck on the slider and then it flickers. tried to trouble shoot, system restore, clean installed (using...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 18:59.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums