Windows 10: Intel DQ57TM Chassis Intrusion Warning

  1.    20 Jul 2017 #1

    Intel DQ57TM Chassis Intrusion Warning


    Just put a system together with the DQ57TM mobo, latest BIOS. Win 10 installed fine, but at each bootup I am confronted with a "WARNING: Chassis Intrusion" message. After a few seconds, the boot proceeds satisfactorily into Windows.

    In the BIOS, Chassis Intrusion is set to Disable, so why am I getting this message, and how do I get rid of it?
      My ComputerSystem Spec


  2. Posts : 6,897
    Windows 10 Pro x64 Build 1709
       22 Jul 2017 #2

    Hi keithjr.

    This sounds a little crazy. Try enabling and using. If that works leave it. If it doesn't work, then go back to disable.

    When you receive MB did they supply a little jumper for switch?
      My ComputerSystem Spec

  3.    22 Jul 2017 #3

    Strange.

    Is anything connected to the chassis intrusion header on the board?
      My ComputerSystem Spec

  4.    22 Jul 2017 #4

    Nothing connected
    bobkn said: View Post
    Strange.

    Is anything connected to the chassis intrusion header on the board?
      My ComputerSystem Spec

  5.    22 Jul 2017 #5

    The choices in BIOS are Disable/Log Only/Pause Post.
    With Log only set, the symptoms are unchanged; Pause Post adds the requirement to press continue to complete boot.
    If I add a link to the header with Log Only set, I get two beeps at powerup, and the same error message.
    Caledon Ken said: View Post
    Hi keithjr.

    This sounds a little crazy. Try enabling and using. If that works leave it. If it doesn't work, then go back to disable.

    When you receive MB did they supply a little jumper for switch?
      My ComputerSystem Spec


  6. Posts : 6,897
    Windows 10 Pro x64 Build 1709
       22 Jul 2017 #6

    Is there a jumper you are supposed to install on board?
      My ComputerSystem Spec

  7.    22 Jul 2017 #7

    The header is for connection to a microswitch which is normally o/c, but s/c when the chassis cover is removed. So fitting a jumper as I did simulated a genuine chassis intrusion.

    Caledon Ken said: View Post
    Is there a jumper you are supposed to install on board?
      My ComputerSystem Spec


  • Posts : 6,897
    Windows 10 Pro x64 Build 1709
       22 Jul 2017 #8

    Well as the board is brand new it sounds defective. Maybe contact vendor and request assistance / RMA.

    If you can't disable in BIOS or short out something is broken, my opinion.
      My ComputerSystem Spec


  •  

    Related Threads
    Solved Taskbar Auto-Pin Intrusion in General Support
    I'm setting up a new laptop with Windows 10 and have taskbar pinning issue. The system sets up with My Documents and Internet Explorer pinned to the taskbar. When I unpin them and reboot the system they reappear again. Very annoying and I haven't...
    Source: https://newsroom.intel.com/newsroom/wp-content/uploads/sites/11/2017/02/XMM7560-Fact-Sheet.pdf
    Hello as Question title says. I'm having difficulty finding the drivers on the Intel website Support and Drivers menu. Drivers needed: Intel Chipset & Intel Management Engine Im using a Z170 motherboard with an I7 6700K. OS Windows 10 64Bit...
    Is Intel HD Graphics Family better than Intel G41 express chipset? The name is only Intel HD Graphics Family there isnt a number after it in dxdiag
    I used the upgrade tool to install w10x64. Installation went fine, I can use my computer and all. Problem is that both of my LAN ports don't work. I get the usual red icon in the taskbar that shows no internet. I went into networking and it doesn't...
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 03:10.
    Find Us