Windows 10: 10166 won't install over 10162

  1.    13 Jul 2015 #1

    10166 won't install over 10162


    I've tried several times to install build 10166 over my current build (10162). Each time I get the same error (irql_not_less_or_equal) after about 35% of the upgrading process.

    I've tried to run the problem solver for Windows Update without any luck, and I also cleared the Windows Software Distribution folder without any luck.

    What should be my next step?
      My ComputerSystem Spec


  2. Posts : 2,036
    Ubuntu14.04x64 MintMate17x64 Win10Prox64
       13 Jul 2015 #2

    1. From Admin Command Prompt: cleammgr
    2. From Admin Command Prompt, Try:
      Dism.exe /online /Cleanup-Image /StartComponentCleanup
      dism /online /cleanup-image /restorehealth
      sfc /scannow
    3. Win+R ->Msconfig->Boot->Advanced Options. Put a check on Maximum memory and use: 4096
      to update to 10166. If it works, set to: 8196, let it run for a while. If works, uncheck Maximum memory.
    4. If step 2 fails or giving any errors. Try to run: Memtest86+ - Advanced Memory Diagnostic Tool
      My ComputerSystem Spec


  3. Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       13 Jul 2015 #3

    littlee said: View Post
    I've tried several times to install build 10166 over my current build (10162). Each time I get the same error (irql_not_less_or_equal) after about 35% of the upgrading process.

    I've tried to run the problem solver for Windows Update without any luck, and I also cleared the Windows Software Distribution folder without any luck.

    What should be my next step?
    Follow topgundcp's suggestions, and add

    5. If you're running Anti-Virus software other than MS Defender, disable it.

    6. Launch an elevated Command Prompt and run
    Chkdsk /f WindowsDriveLetter:

    For example, if Windows is installed on the C partition (most common)
    Chkdsk /f C:

    If you're asked to check the disk at next boot, answer yes and restart your machine. This might run for a while, so plan your time to run it.
      My ComputerSystem Spec

  4.    13 Jul 2015 #4

    Thanks for all your help so far.

    I have followed the steps to the letter, now my problem is that Windows won't let me update to 10166 - Windows Update says that there aren't any new updates for my computer. Go figure
      My ComputerSystem Spec


  5. Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       13 Jul 2015 #5

    littlee said: View Post
    Thanks for all your help so far.

    I have followed the steps to the letter, now my problem is that Windows won't let me update to 10166 - Windows Update says that there aren't any new updates for my computer. Go figure
    It took a few minutes for Windows to catch up on my machine ... maybe 10 or 20 minutes, but I was eventually offered 10.0.166.

    Note that things are changing fast: Preview builds, ISOs, and activation ...
      My ComputerSystem Spec

  6.    14 Jul 2015 #6

    Well, I found a 10166 ISO online and downloaded it. New fault has appeared:
    0xC1900101 - 0x30018
    The installation failed in the FIRST_BOOT phase with an error during SYSREP operation.
    I also got the fault message "CANCEL_STATE_IN_COMPLETED_IRP".

    What's wrong this time?
      My ComputerSystem Spec


  7. Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       14 Jul 2015 #7

    littlee said: View Post
    Well, I found a 10166 ISO online and downloaded it. New fault has appeared:
    0xC1900101 - 0x30018
    The installation failed in the FIRST_BOOT phase with an error during SYSREP operation.
    I also got the fault message "CANCEL_STATE_IN_COMPLETED_IRP".

    What's wrong this time?
    Not offical ISO probably. Better to use what you had and try to repair ir, but ... MS is temporarily disabling Updates, ISOs and activation starting sometime today - 14 July 2015

    I suggest reinstalling using the official 10.0.162 ISO while it's still available.

    Then members can try to help solve any issues that aren't from a non-MS ISO.
      My ComputerSystem Spec

  8.    14 Jul 2015 #8

    I downloaded the 10162 ISO from Microsoft and tried to upgrade over the build I have (10162) not to lose any personal settings.
    The following error appears:

    0xC1900101 - 0x3000D
    The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation.

    What should be my next step?
      My ComputerSystem Spec


 

Related Threads
I've posted this before, but I need to know if anyone know exactly what has changed on builds after 10130, which install and runs completely fine on my AsRock h97m Pro4 board. The bios settings are the same throughout all previous builds on and...
Solved Build 10162 will not update to 10166 in Windows Updates and Activation
I had the same problem with build 10130 not updating to 10162. I had to upgrade with the preview iso. Running it in Oracle VM VirtualBox What is going on?
10166 will not install over10130 in Installation and Upgrade
evening guys,need a bit of info please have downloaded fsb 10166 numerous times as updates it says its installing gets to 100%,and then says a restart has been scheduled or restart now which i have done,that restarts and is configuring w10 to ...
Solved Win10 10130 & 10162 won't Install in Installation and Upgrade
Hi... tried the last two Win10 pre-releases... 32bit... downloaded the ISOs, burned to DVDs, and ran install: 1. On an ATOM processor... NETBOOK 2. On an AMD processor... full LAPTOP ONCE, the NETBOOK got to the point of "just after" "Let's...
Hi there On install on an HP envy laptop I got the "Just a Moment" Logo at the final stage just going on forever. After about 15 mins I thought well I'll try again. I couldn't even POWER OFF the laptop. I had to open it up and remove the battery...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:13.
Find Us