Windows 10: Apply Windows 10 Enterprise image via USB

  1. Posts : 2
    Windows 10 Enterprise
       08 Feb 2017 #1

    Apply Windows 10 Enterprise image via USB

    I have taken an image using DISM and it is in the .wim format. I want to apply it to a tablet using a usb stick, it has a UEFI Bios.

    in the past with windows 7 and I have been able to create a bootable usb drive by using Windows 7 USB DVD tool to create the .wim from .iso then copy the boot files onto the stick, I was then able to boot to the usb stick and a command prompt appeared where I used imagex commands to apply it.

    can this be done with Windows 10 Enterprise?

      My ComputerSystem Spec

  2. Fafhrd's Avatar
    Posts : 1,927
    Windows 10 x86 14383 Insider Pro and Core 10240
       09 Feb 2017 #2

    Yes it can, but if you can use the Windows 7 USB you already have, you can just replace the Windows 7 Wim with the image you have made with Dism. AFAIK, the technology hasn't changed, just the WAIK/ADK tools have been updated to match their parent OS versions.

    Unless you have an Enterprise license, your USB will be a time limited evaluation, but it is possible to create this within Windows 10 Pro, using the Windows-to-Go tool, found in Control panel (PWCREATOR.EXE)
      My ComputersSystem Spec

  3. Posts : 2
    Windows 10 Enterprise
    Thread Starter
       09 Feb 2017 #3

    Thanks for your reply

    this still does not work. I am trying to image a surface pro 4 and a dell venue 11 pro, both have a uefi bios and when I select the usb drive to boot from it goes straight into normal boot and logs in to windows. How do I get the command prompt to appear so that I can enter in my command line?

      My ComputerSystem Spec

  4.    09 Feb 2017 #4

    You need to update your PE Boot Files....
      My ComputerSystem Spec

  5. Fafhrd's Avatar
    Posts : 1,927
    Windows 10 x86 14383 Insider Pro and Core 10240
       09 Feb 2017 #5
      My ComputersSystem Spec


Related Threads
Windows 10 Enterprise Image Matching in Installation and Upgrade
Sorry guys, I didn't know how to give this a proper title. Here's our situation... I work at a college where we have multiple images covering various needs. I've managed to pare this down to 2, being EMPLOYEE and PUBLIC. Here's the rub... We...
Group Policies that apply only to Windows 10 Enterprise and Education Editions In Windows 10, version 1511, the following Group Policies apply only to Windows 10 Enterprise and Windows 10 Education. 81458 Source:...
Hi I installed Windows ADK 10 v1511 on Windows 10 v1511 Enterprise 64 bit. I typed the following commands: Dism /Apply-Image /ImageFile:"<wim_File_Path>\install.wim" /Index:1 /ApplyDir:"<Apply_Directory_Path>" /Verify /CheckIntegrity...
Solved creating usb pen for dism apply-image in Installation and Upgrade
I have managed to create a USB pen drive to apply WIM images using the DISM Apply-image command in 64bit so I know it can be done but any ideas how to create a pen to apply 32bit WIM images
Hi, last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state. I manually setup drive like this: select disk 0 clean convert gpt create partition...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:37.
Find Us