Page 2 of 4 FirstFirst 1234 LastLast
  1.    06 Feb 2017 #11
    Join Date : Oct 2014
    Trnava
    Posts : 2,866
    Windows 10.4 Home 1709 x64

    Quote Originally Posted by NavyLCDR View Post
    That won't work in UEFI because the filesystem must be FAT32. Rufus has proven to be the worst tool you can use to create a bootable USB flash drive.
    Rufus presets FAT32 for UEFI only, it uses NTFS for Legacy UEFI-CSM.
      My ComputerSystem Spec
  2.    06 Feb 2017 #12
    Join Date : May 2016
    Posts : 36
    Windows 10
    Thread Starter

    I have created the USB in Rufus using FAT32 system/GPT partition and the computer is installing but a message popped up which has again confused me. Please guide me. Screenshot below.

    Click image for larger version. 

Name:	UEFI Force Install.png 
Views:	8 
Size:	1.19 MB 
ID:	120075

    Quote Originally Posted by TairikuOkami View Post
    Rufus presets FAT32 for UEFI only, it uses NTFS for Legacy UEFI-CSM.
      My ComputerSystem Spec
  3.    06 Feb 2017 #13
    Join Date : May 2016
    Posts : 36
    Windows 10
    Thread Starter

    I have created the USB in Rufus using FAT32 system/GPT partition and the installation has started but a message popped up which has again confused me. Please guide me. Screenshot below.
    Click image for larger version. 

Name:	UEFI Force Install.png 
Views:	3 
Size:	1.19 MB 
ID:	120076

    Quote Originally Posted by NavyLCDR View Post
    That won't work in UEFI because the filesystem must be FAT32. Rufus has proven to be the worst tool you can use to create a bootable USB flash drive.
      My ComputerSystem Spec
  4.    06 Feb 2017 #14
    Join Date : Jul 2015
    Posts : 9,403
    Windows 10 Pro

    Quote Originally Posted by Saad Anwar View Post
    I have created the USB in Rufus using FAT32 system/GPT partition and the installation has started but a message popped up which has again confused me. Please guide me. Screenshot below.
    Click image for larger version. 

Name:	UEFI Force Install.png 
Views:	3 
Size:	1.19 MB 
ID:	120076
    I don't know what the commands are for the Linux installer you are using, but you need to convert the hard drive you are trying to install it to to GPT. In Windows it is:

    diskpart
    select disk 0
    clean
    convert gpt

    (which will erase the hard drive, assuming the drive is the first drive in the system (disk 0).
      My ComputerSystem Spec
  5.    06 Feb 2017 #15
    Join Date : May 2016
    Posts : 36
    Windows 10
    Thread Starter

    Since we all are short of time, I am trying to figure this out ASAP. I have chosen the Go Back option (screenshot above) and now i have got this window. Screenshot below. Should I erase the disk and continue with the installation of Lubuntu since I have already formatted it tons of time and there is no data in it. But the question was of UEFI compatibility mode.
    Click image for larger version. 

Name:	Installation type.png 
Views:	4 
Size:	1.79 MB 
ID:	120078
      My ComputerSystem Spec
  6.    06 Feb 2017 #16
    Join Date : Jul 2015
    Posts : 9,403
    Windows 10 Pro

    Erase and install should format it in GPT mode for UEFI. If not, possibly the Something else option, then use whatever tool it opens to delete all the partitions on the drive and initialize disk as GPT.
      My ComputerSystem Spec
  7.    06 Feb 2017 #17
    Join Date : May 2016
    Posts : 36
    Windows 10
    Thread Starter

    Thanks. I will try this.

    Quote Originally Posted by NavyLCDR View Post
    Erase and install should format it in GPT mode for UEFI. If not, possibly the Something else option, then use whatever tool it opens to delete all the partitions on the drive and initialize disk as GPT.
      My ComputerSystem Spec
  8.    06 Feb 2017 #18
    Join Date : Jul 2015
    Posts : 9,403
    Windows 10 Pro

    Three things must match:

    Computer in UEFI or legacy BIOS mode - it currently looks like you are in UEFI which is what you want.

    Installation USB flash drive - if the computer is in UEFI mode, the flash drive must be FAT32 (the partition can be marked as active to make it compatible with both UEFI and legacy BIOS/CSM). If the computer is in legacy BIOS or CSM mode, the flash drive can be either FAT32, or NTFS, but the partition on it must be marked as active.

    The hard drive you are installing to - if the computer is in UEFI mode, the hard drive must use the GPT partitioning type. If the computer is in legacy BIOS/CSM mode, the hard drive must use the MBR partitioning type.

    CSM is a mode for UEFI booting that simulates legacy BIOS booting so if CSM is enabled, then you would set everything up like it was for legacy BIOS, but that is not what you want if you can avoid it.
      My ComputerSystem Spec
  9.    06 Feb 2017 #19
    Join Date : May 2016
    Posts : 36
    Windows 10
    Thread Starter

    Its too technical for a noob like me to understand this as I have become very frustated :-( The above installation failed saying "the grub pc package failed to install into target". I chose 'optimized defaults' before installation. Here is the screenshot of the BIOS, can u please suggest me something so that my PC get back to life. I cant handle this anymore
    Click image for larger version. 

Name:	BIOS.jpg 
Views:	7 
Size:	901.8 KB 
ID:	120085

    Quote Originally Posted by NavyLCDR View Post
    Three things must match:

    Computer in UEFI or legacy BIOS mode - it currently looks like you are in UEFI which is what you want.

    Installation USB flash drive - if the computer is in UEFI mode, the flash drive must be FAT32 (the partition can be marked as active to make it compatible with both UEFI and legacy BIOS/CSM). If the computer is in legacy BIOS or CSM mode, the flash drive can be either FAT32, or NTFS, but the partition on it must be marked as active.

    The hard drive you are installing to - if the computer is in UEFI mode, the hard drive must use the GPT partitioning type. If the computer is in legacy BIOS/CSM mode, the hard drive must use the MBR partitioning type.

    CSM is a mode for UEFI booting that simulates legacy BIOS booting so if CSM is enabled, then you would set everything up like it was for legacy BIOS, but that is not what you want if you can avoid it.
      My ComputerSystem Spec
  10.    06 Feb 2017 #20
    Join Date : May 2016
    Posts : 36
    Windows 10
    Thread Starter

    Amazing. After a lot of fuss I was able to install Windows but with a slight twist. I created two partition during windows 10 installation C: and D and installed Windows in the D Drive and Voila. Could anybody tell me why it was not installing in the C: drive ??
      My ComputerSystem Spec

 
Page 2 of 4 FirstFirst 1234 LastLast


Similar Threads
Thread Forum
Unable to install windows 10 - couldnt find boot disk
Hey guys! I'm not sure if this is the correct forum for this, but I'm currently trying out Windows 10, but I'm getting an error which I believe is due to my previous dual-boot consisting of Windows 7 + Antergos w/ Grub. (My friend installed...
Installation and Upgrade
Windows 10 1511 will not install no matter what I do!
The title says most of it, so I'll go through what I have tried and what happened when I tried it. (on version 10240 btw) Run Windows update manually. I've run it dozens of times now, the 1511 update is there but always fails. Make sure...
Windows Updates and Activation
Microsoft: You Must Install This Patch No Matter Your Windows Version
Redmond releases security update for all Windows versions More: http://news.softpedia.com/news/microsoft-you-must-install-this-patch-no-matter-your-windows-version-500207.shtml
Windows 10 News
Solved unable to clean install windows 10 from usb on home build - boot loop
Hello, I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media...
Installation and Upgrade
Solved Unable to boot into the install DVD
I have a new PC and want to install Win 10 on it to see how it behaves. I made a DVD from the iso file as instructed in the MS page http://windows.microsoft.com/en-gb/windows7/burn-a-cd-or-dvd-from-an-iso-file and set the PC to boot from optical...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 13:09.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums