1.    14 Dec 2016 #1
    Join Date : Dec 2016
    Posts : 1
    Windows 10

    Cant install Windows 10 because of GPT partition error message


    Im trying to reinstall windows 10 on my PC but keep getting GPT partition error message. The system won't allow me install and new partition either or reformat one.
    Attached Thumbnails Attached Thumbnails unnamed-1.jpg   unnamed.jpg  
      My ComputerSystem Spec
  2.    14 Dec 2016 #2
    Join Date : Jun 2015
    UK
    Posts : 2,099
    Windows 10 Home x64 (Laptop), Windows 10 Pro x64 (Desktop)

    We need to see your full disk map which is hidden in the above photo. Are you doing a clean install?
      My ComputersSystem Spec
  3.    14 Dec 2016 #3
    Join Date : Jul 2015
    Posts : 9,398
    Windows 10 Pro

    It looks like you are booting from a DVD? How did you make the Windows DVD?

    Select the custom install option, when you get the list of partitions on the hard drive, press Shift +F10. In the command window that opens run:

    diskpart
    select disk 0
    clean
    exit
    exit

    Click refresh on the list of partitions window. You should get disk 0 with only unallocated space. Select the unallocated space and click next to install Windows to it.

    NOTE: The clean command above will erase everything on the disk!
      My ComputerSystem Spec
  4.    15 Dec 2016 #4
    Join Date : Oct 2015
    Posts : 2,043
    Windows 10 Pro X64

    Hi,
    @Carl1201:
    You're trying to install Windows onto the MSR partition.
    Either follow NavyLCDR instructions or run custom install and delete the existing partitions.
    Do no create any new ones Windows will take care of all that.

    Cheers,
      My ComputersSystem Spec
  5.    16 Dec 2016 #5
    Join Date : Dec 2016
    Posts : 49
    Windows 10

    UEFI mode and Legacy BIOS mode


    The UEFI firmware supports two boot modes: UEFI mode and Legacy BIOS mode.

    - UEFI mode uses the GUID Partition Table (GPT) partition style.
    - Legacy BIOS mode uses the Master Boot Record (MBR) partition style.

    On many computers, you can boot from the Windows 10 USB/DVD installation media either in UEFI mode or in Legacy BIOS mode.

    Here is an example of the one-time boot menu.

    Click image for larger version. 

Name:	Boot to UEFI mode or Legacy BIOS mode.png 
Views:	53 
Size:	548.1 KB 
ID:	114284

    You receive an error message when you try to install Windows 10

    If you receive the error message: "Windows cannot be installed to this disk. The selected disk is of the GPT partition style", itís because your computer is booted in Legacy BIOS mode, but your hard drive is not configured for Legacy BIOS mode.

    You have two options when you get that error message.

    Option 1: Boot from the Windows 10 USB/DVD installation media in UEFI mode, so you can use the GPT partition style. This option lets you keep the existing partition style and lets you use the PCís UEFI firmware features.

    Option 2: Delete all partitions on the hard drive, so you can use the MBR partition style. In other words, you convert GPT disk to MBR disk. This option is not recommended because then you will not be able to use the PCís UEFI firmware features.

    Click image for larger version. 

Name:	Windows cannot be installed to this disk. The selected disk is of the GPT partition style.png 
Views:	170 
Size:	37.2 KB 
ID:	113956

    If you receive the error message: "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks", itís because your computer is booted in UEFI mode, but your hard drive is not configured for UEFI mode.

    You have two options when you get that error message.

    Option 1: Boot from the Windows 10 USB/DVD installation media in Legacy BIOS mode, so you can use the MBR partition style. This option lets you keep the existing partition style. This option is not recommended because then you will not be able to use the PCís UEFI firmware features.

    Option 2: Delete all partitions on the hard drive, so you can use the GPT partition style. In other words, you convert MBR disk to GPT disk. This option lets you use the PCís UEFI firmware features.

    Click image for larger version. 

Name:	Windows cannot be installed to this disk. The selected disk has an MBR partition table.png 
Views:	170 
Size:	36.1 KB 
ID:	113957

    Installing using the GPT or MBR partition style

    If you want to use the GPT partition style, you must boot from the Windows 10 USB/DVD installation media in UEFI mode (marked UEFI in the boot menu). If you want to use the MBR partition style, you must boot from the Windows 10 USB/DVD installation media in Legacy BIOS mode (not marked UEFI in the boot menu).

    You do not need to delete all partitions if you want to keep the existing partition style (GPT or MBR), but in that case you need to make sure that Windows Setup boots to the correct firmware mode (UEFI or Legacy BIOS).

    The "convert gpt" and "convert mbr" commands are useless, if you want to change the partition style (GPT or MBR). Boot from the Windows 10 USB/DVD installation media either in UEFI mode or in Legacy BIOS mode. After that, on the "Where do you want to install Windows?" screen delete all partitions on the hard drive until it's unallocated. Installing to the unallocated space and letting Windows Setup create the partition style and partitions works with both UEFI mode and Legacy BIOS mode.

    On a GPT disk, Windows Setup will create a Recovery partition, an EFI system partition, a Microsoft Reserved partition (won't show in Disk Management) and a primary Windows partition. On an MBR disk, Windows Setup will create a System Reserved partition and a primary Windows partition.

    Source: Microsoft

    Windows Setup: Installing using the GPT or MBR partition style

    Many PCs now include the ability to use the UEFI version of BIOS, which can speed up boot and shutdown times and can provide additional security advantages. To boot your PC in UEFI mode, you'll need to use a drive formatted using the GPT drive format.

    Many PCs are ready to use UEFI, but include a compatibility support module (CSM) that is set up to use the legacy version of BIOS. This version of BIOS was developed in the 1970s and provides compatibility to a variety of older equipment and network configurations, and requires a drive that uses the MBR drive format.

    However, the basic MBR drive format does not support drives over 4TB. It's also difficult to set up more than four partitions. The GPT drive format lets you set up drives that are larger than 4 terabytes (TB), and lets you easily set up as many partitions as you need.

    Boot to UEFI mode or Legacy BIOS mode

    Boot into UEFI mode or legacy BIOS-compatibility mode when installing Windows from your USB, DVD, or network location.

    If you install Windows using the wrong mode, you wonít be able to use the features of that firmware mode without reformatting the drive.

    Select the firmware mode during bootup.

    1. Boot the PC. As the firmware starts to run, press the key that opens the boot device menu. For example, press the Esc, F2, F8, F9, F12, or other key to enter the firmware or boot menus.

    2. On the boot device menu, select the command that identifies both the firmware mode and the device. For example, select UEFI USB Drive or Network - BIOS.

    Note   Note
    You might see separate commands for the same device. For example, you might see UEFI USB Drive and BIOS USB Drive. Each command uses the same device and media, but boots the PC in a different firmware mode.
    How to check that you are using either UEFI mode or Legacy BIOS mode

    If the entire hard drive not show as unallocated space, then delete all partitions on the hard drive until it's unallocated. Select a partition and click on the "Delete" option for each partition.

    After that, select the "New" and "Apply" buttons.

    Click image for larger version. 

Name:	Select the New and Apply buttons.png 
Views:	84 
Size:	27.1 KB 
ID:	116857

    Click image for larger version. 

Name:	Windows might create additional partitions for system files.png 
Views:	127 
Size:	33.3 KB 
ID:	114640

    Click image for larger version. 

Name:	UEFI mode - GPT partition style.png 
Views:	127 
Size:	35.6 KB 
ID:	114641

    Click image for larger version. 

Name:	Legacy BIOS mode - MBR partition style.png 
Views:	127 
Size:	31.2 KB 
ID:	114642

    How to check that your Windows 10 USB flash drive works with UEFI mode

    If your Windows 10 USB flash drive is formatted as FAT32 file system, then it should be bootable in UEFI mode.

    When you boot from the USB flash drive, UEFI mode starts the boot process either from the "\efi\boot\bootx64.efi" file or from the "\efi\boot\bootia32.efi" file. There are only a few computer systems that have the 32-bit UEFI firmware and in that case you must use a 32-bit version of the Windows 10 USB flash drive.

    How to create a bootable USB flash drive to install Windows 10

    USB Flash Drive - Create to Install Windows 10

    OPTION ONE: Use Media Creation Tool to create Bootable Windows 10 USB for Legacy BIOS and UEFI

    Note: Media Creation Tool creates a USB flash drive that works with both UEFI mode and Legacy BIOS mode.

    OPTION TWO: Use "Rufus" to create Bootable Window 10 USB for Legacy BIOS and UEFI

    Note: Rufus is unable to create a USB flash drive that can be booted in both UEFI mode and Legacy BIOS mode.

    How to create a bootable USB flash drive from the Windows 10 ISO image file, that works with both UEFI mode and Legacy BIOS mode

    - Connect your USB flash drive.
    - Open a command prompt as administrator and type (or copy and paste) the following commands.

    diskpart
    list disk (make note of the USB flash drive disk number)
    select disk # (where # is the USB flash drive disk number)
    clean
    create partition primary
    format quick fs=fat32
    active
    exit

    - Right-click the Windows 10 ISO image file and choose "Mount". If you donít see mount command from the context menu, go to "Open with" > "Windows Explorer" instead.
    - Copy the files and folders from the mounted Windows 10 ISO image file to the USB flash drive.

    How to create a bootable USB flash drive from the Windows 10 ISO image file, that only works with UEFI mode

    UEFI mode do not require a partition to be set as active.

    - Connect your USB flash drive.
    - Format the USB flash drive to FAT32 file system (see screenshot below). The default "Allocation unit size" setting is automatically detected, so do not change the setting.
    - Right-click the Windows 10 ISO image file and choose "Mount". If you donít see mount command from the context menu, go to "Open with" > "Windows Explorer" instead.
    - Copy the files and folders from the mounted Windows 10 ISO image file to the USB flash drive.

    Click image for larger version. 

Name:	Format the USB flash drive to FAT32 file system.png 
Views:	42 
Size:	51.7 KB 
ID:	114808

    Windows support for large-capacity disks as non-booting data volumes

    Look at post #5 in this thread: I want to convert drive 4 to gpt

    How to fix the Windows 10 bootloader

    Look at post #24 in this thread: How do I restore w10 bootloader? dual boot with ubuntu on separate hdd
    Last edited by Avocado; 30 Jan 2017 at 07:18. Reason: more info
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Latest build WIP (14367) will not install with weird error message.
When I try to install it it says first it found errors, and provided a 'Fix Error' box. When I click on it, it gets to about 25% of download, then a popup Window says "Cannot Install Windows 10 on USB Flash Drive with Setup" or similar, see...
Windows Insider
Solved Can't install. possible partition error
I've come here to beg for some help from you lovely windows techies. My issue is that the CD that I bought wont install on the laptop i have (prev win 7 and ubuntu 14.4) The main details can be found here, if you would be so kind, along with what...
Installation and Upgrade
Solved Getting error message after Win10 install.
Hi. I just upgraded from win 8.1 to win10. Whenever I do a Clean Boot, I get thefollowing message displayed at the welcome screen. ďThe Procedure entry IOCTLDisableButtonClick could not be located in the Dynamic Link Library...
Installation and Upgrade
Critical Error message on boot up - new 10103 install on laptop
I just upgraded my Dell Latitude E6400 from Win7 to Win10 1030 (not clean install). Everything looked good a first and I did the first set of Windows Updates. Shutoff laptop and set aside. I just cam back to it and upon restarting I get an error...
General Support
Solved Windows Installation Error; Will not install on Partition
Hey there, I am trying to install Windows 10 10130 onto my laptop's blank partition that is 400 GB. Upon installing I noticed it gives me an error that says "We couldn't create a new partition or locate an existing one." I'm not sure what this...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 10:06.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums