Win 10 USB Install Failing

Page 2 of 2 FirstFirst 12

  1. Posts : 12
    Windows 10
    Thread Starter
       #11

    flybynite said:
    open powershell as administrator
    type diskpart press enter
    type list disk press enter
    locate your USB drive from list (you can choose by size)
    type sel disk (then number of drive from list for example sel disk 4 then press enter
    type clean then press enter
    type create part pri then press enter
    type sel part 1 then press enter
    type format fs=fat32 quick then press enter
    type assign then press enter
    type active then press enter
    type exit then press enter
    type exit then press enter

    Now mount your ISO file and copy all the files to your usb drive
    restart, and boot from USB drive.
    I can't do format fs=fat32 quick, I get the error:

    Virtual Disk Service error:
    A concurrent second call is made on an object before the first is completed.

    Any ideas?
      My Computer


  2. Posts : 12
    Windows 10
    Thread Starter
       #12

    Freedee15 said:
    I can't do format fs=fat32 quick, I get the error:

    Virtual Disk Service error:
    A concurrent second call is made on an object before the first is completed.

    Any ideas?
    I can't run it even if i delete the quick.
    Trying a restart of computer.
      My Computer


  3. Posts : 12
    Windows 10
    Thread Starter
       #13

    Great, it's working now.
      My Computer


  4. Posts : 25
    Windows 10
       #14

    flybynite said:
    open powershell as administrator
    type diskpart press enter
    type list disk press enter
    locate your USB drive from list (you can choose by size)
    type sel disk (then number of drive from list for example sel disk 4 then press enter
    type clean then press enter
    type create part pri then press enter
    type sel part 1 then press enter
    type format fs=fat32 quick then press enter
    type assign then press enter
    type active then press enter
    type exit then press enter
    type exit then press enter

    Now mount your ISO file and copy all the files to your usb drive
    restart, and boot from USB drive.
    UEFI boot mode do not use boot sectors on the hard drive and the USB flash drive, and do not require active partition to be set.

    Format your USB flash drive in Windows Explorer. Note: You need to choose the FAT32 file system.

    When formatting is complete.
    - In Windows 10, mount the Windows 10 ISO image file by right-clicking the ISO image file and choosing Mount. If you donít see Mount command from the context menu, go to Open with -> Windows Explorer instead.
    - Select everything in the mounted ISO image file, and copy them into the USB flash drive you prepared earlier.
      My Computer


  5. Posts : 12
    Windows 10
    Thread Starter
       #15

    Ok, so I've gotten to the install but now it says there is a driver missing.
      My Computer

  6. flybynite's Avatar
    Posts : 4,666
    Windows 10 ProWorkstation -- Whichever is highest build number.
       #16

    Freedee15 said:
    Ok, so I've gotten to the install but now it says there is a driver missing.
    Sounds like a bad iso, perhaps redownload? Here is my ISO, it is pro. If you use Home, you will need to download it from MS.
    Code:
    https://mega.nz/#!xdYBGYAI!5h4kYux9ZfPKWINS8ApXsw_8BgA0SDmMslwAK381QRQ
      My Computer


 
Page 2 of 2 FirstFirst 12

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 21:08.
Find Us




Windows 10 Forums