1.    11 Aug 2016 #1
    Join Date : Aug 2016
    Posts : 1
    Windows 10 Pro 64 bit

    Messed up Bios settings. Please help

    I Changed BIOS OS mode selection setting from CSM to "UEFI and Legacy." Now laptop boots to blank screen. No bios splash screen. I hear the optical drive being recognize and the fans turn on. Fans intermittently speed up and slow down.

    Samsung NP365E5C-S05US with Windows 10 Pro 64-Bit installed on an SSD. Bios version P07ABF.
    -unplugged ac adapter and battery, pressed power button to drain system, reconnected and still nothing
    -tried putting a windows 10 pro, 8, and 7 installation disk in. I can hear drive spinning but still blank screen
    -tried f2 f8 f12 at start up but no response
    -popped out ssd and tried rebooting, nothing

    I made a stupid mistake. Guys please help me!
      My ComputerSystem Spec
  2.    11 Aug 2016 #2
    Join Date : Aug 2015
    Posts : 131
    windows 10

    Remove battery from computer .. NOW press and hold power key for 15 seconds..
    Put the Battery back and now try to open BIOS .. using F2.

    If no go contact Support.. u may need a new motherboard.

    Que: do you see or samsung logo when computer powers on.. or any other symbol such MOBO brand
      My ComputerSystem Spec
  3.    11 Aug 2016 #3
    Join Date : Apr 2016
    Manchester, U.K.
    Posts : 585
    Windows 10 Pro 64bit

    Remove any usb devices, remove power cord, remove battery incl cmos battery, press & hold power button for 15-20 seconds then plug batteries back in & turn on. Some say wait 30 minutes after releasing the power button before plugging everything back in so you can try that also if you wish.
      My ComputerSystem Spec
  4.    11 Aug 2016 #4
    Join Date : Aug 2015
    Posts : 440
    10 pro 64 clean install

    Are you sure you're tapping the correct key for the bios ? When you turn the laptop on tap the F2 and see if the bios screen come on ... Also, can you try hooking it up to another external monitor, does it have that option ? You can also try tapping the F4 key when turning it on and see if the recovery options comes on , that would probably reset the unit to factory setting, the way you got it the first time you turn the unit on ( W8 ) If all else fails you probably going to have to dismantle the unit to get at the CMOS battery . You should search Google whether there is any YouTube video in how to remove the CMOS Battery
    Last edited by sn00ker; 11 Aug 2016 at 17:19.
      My ComputerSystem Spec
  5.    15 Aug 2016 #5
    Join Date : Jun 2015
    USA - NC
    Posts : 69
    Windows 10

    On some model of samsungs if you remove the cover for the memory modules there are two little solder points that can be jumped with a piece of wire or a paper clip bent in the shape of a "U". This resets BIOS for a forgotten password, I don't know if it resets BIOS or just the password. There are several youtube videos showing how this is done. Not hard to do and doesn't take long.

    LINK to Youtube list of how to's.
      My ComputerSystem Spec
  6.    16 Aug 2016 #6
    Join Date : Jun 2016
    Posts : 1,565
    Win10 1607

    F10 ? or ESC ? on some Samsung

    I also read popping the HDD/SSD like you did after doing the CSM change let some people back into the bios

    and there is this post too about multiple keyboards:

    I can’t access the BIOS setup using F2 key on Samsung NP270E5V laptop - Super User
      My ComputerSystem Spec


Similar Threads
Thread Forum
I need to enable VIRTUALIZATION setting in my bios please
Please, could someone help me, as Kaspersky alerts me to a warning that I need to enable virtualization. They say:- Protection against screenshots is disabled. I am not great on the technical front, and I am told I need to get into my bios to...
General Support
Solved Refused to Post after XMP Setting in BIOS
Hi, Yesterday, I installed all mobo and other drivers plus various supporting software in my new build (#2 in spec with BIOS 1801). Four in the morning, all was done and I decided to end by going into BIOS to set the memory according to its 1200...
PC Custom Builds and Overclocking
Solved log in changed
Windows 10 usually logs in with the name I assigned to my computer "Charlee" (with no password) Today I used my microsoft e-mail account to download an application. When I restarted the computer, the screen log in changed. Now "Charlee" is gone, and...
User Accounts and Family Safety
Solved AHCI setting in BIOS
I have a MB that lets me change the SATA Type. The options are: Native IDE RAID AHCI It is set to Native IDE now. I don’t want to run a raid configuration. What is AHCI. What does it do? Is there an advantage in switching to AHCI? Thanks
Drivers and Hardware
Login screen changed and password changed after verification
My Login screen used to have only my name on it and yesterday after clicking on "Verify" and going thru several screens and rebooting, I noticed that my name and Hotmail address are both on my Login screen and the Windows 10 password has been...
User Accounts and Family Safety
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:45.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App

Windows 10 Forums