How do I add RAID / other drivers to W10 installation media

  1. jimbo45's Avatar
    Posts : 7,167
    Windows / Linux : Centos, Ubuntu, OpenSuse

    How do I add RAID / other drivers to W10 installation media

    Hi there

    I need to add a RAID driver (I have the driver) to the Windows install media (got iso and usb via media creation tool - the iso / usb was created on a different machine).

    Previous versions would let you via an Fn key load drivers from a "Diskette" image. This option of course isn't there.

    If I don't load the RAID driver at boot Windows gives the standard message "No Hard Disks found".

    Any EASY way to do this.

    Note this has to be done at install time - it can't be done afterwards as Windows won't see any HDD's. !!!!!

    I find often when stuff is "Simplified too much" --such as 1 click or "Easy install" options then when stuff does need to be modified it's usually a pain. I can't see what was wrong with the original optional prompt to load drivers at install (XP / W7 etc). W10 install is easy if it's a bog standard installation but if you have things like Hardware RAID it's a pain.

      My ComputerSystem Spec

  2. jimbo45's Avatar
    Posts : 7,167
    Windows / Linux : Centos, Ubuntu, OpenSuse
    Thread Starter

    Hi there

    Found a real SILLY way to do this on an HP server -- I had to BURN an old fashioned ISO (fortunately I still had an old USB DVD writer).
    Then on the server bios boot options there;'s an option called "Intelligent provisioning" which installs both rhe OS and driver at the same time. The intelligent provisioning requires a PHYSICAL ISO image !!! - one on HDD won't do and it loads the driver and does the install.

    However this method is specific to this particular machine. ("Yesterday's technology Tomorrow" !!!!!).

    Surely there must be a better method of adding drivers PRE-INSTALL if these are required - for example hardware RAID controllers etc.

    so although I've solved it for this particular piece of hardware (HP Proliant GEN 8 Microserver) I'd still like a better generic method.
    The Gen 8 server uses the W12 (or W8) server RAID driver - works fine on W10.

    I want a Windows image on this server (while it's a free upgrade from W7 / W8.1) so need to get it working before 23.59 today !!!!!!.

    Any assistance on this would be really appreciated -- I've looked at using nLite and the WAIK tools but a) it's complicated and b) I think WAIK for W10 has changed so no good.

    I can't believe I'm the only person who has this problem with Hardware RAID.

      My ComputerSystem Spec


Related Threads
I bought one of those cheapish mini-PCs (MSI Cubi N) that come with RAM, HD and Windows 10 OS. The HD is a slow 32GB mSata SSD which I want to replace with a Samsung EVO 850 SSD. As the mini-PC did not come with any Windows 10 installation media, I...
I have 4 ssd's all paired to first raid & then do install to win 10 but AMD bios only sees two all else sees 4. Following the tutorials I did the following on an older AMD FX-8350 processor with Sabertooth 990FX R2.0 MB: attempted to make a...
By Gigabyte system board uses "Intel Rapid Storage Technology. Version (c) 2003-11 Option-ROM" as a firmware function. This version does not support Win 10. I contacted Gigabyte and they pointed me to version 14 software drivers which do...
Got a new DELL that comes with windows 7 Pro. and I upgraded to windows 10 Pro with no issues. Later I found out that I "should " have Upgraded using the "Windows 10 Media Creation Tool" instead of "Get Upgrade" How can I get the installation...
Raid Drivers in Drivers and Hardware
Hello everyone, I downloaded my copy of windows 10 and burnt the ISO to a disk. Went to go install windows 10 for a dual boot between 10 and 7...well when I get the install it it says it can't find any media to install to as it needs the raid...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 14:13.
Find Us