1.    21 Jul 2016 #1
    Join Date : Jul 2016
    Posts : 4
    win 10 pro safe mode with net

    upgrade from win 7 to win 10. SYSTEM_SERVICE_EXCEMPTION igdkkmd64.sys


    Hi everyone,

    Let me state my huge thanks and appreciation for any help i recieve right up front.


    The pre flight check all indicate I should be fine.
    I did the additional,
    Removed antimalware and virus,
    Done checkdisk,
    Imaged my partitions
    Upgraded BIOS
    Made sure all MS updates were applied,
    Simplified my setup removing old printer extra monitor etc etc.
    So the upgrade completes and I have tried a few times now(all is fine at this point). Problem comes after I login to Win 10.
    The first time everything works, I start customising, basicly making myself at home.
    The first restart or shutdown after the initial setup, I can never get back in, from that point on its safe mode with networking.
    I am stuck with either spinning dots with windows logo - unresponsive/hung or
    SYSTEM_SERVICE_EXCEMPTION igdkkmd64.sys - selfcheck and reboot

    So I have DVI connected to monitor Dell U2413,
    Motherboard is a Gigabyte z77x-ud5h wifi rev 1.1
    i7 3770k - (4000 intel gfx)
    msi gtx 670 (current disabled)
    32gb ram
    750 powersupply


    So Im stuck Ive tried all sort of stuff from the internet and currently got 10.18.10.4425 intel driver from a clean DDU install
    Please help me get back into full windows 10

    Cheers before hand
      My ComputerSystem Spec
  2.    21 Jul 2016 #2
    Join Date : Jul 2016
    Posts : 4
    win 10 pro safe mode with net
    Thread Starter

    Quick update,
    currently trouble shooting with MS and I now have
    Nvidia 368.81 enabled
    intel 4000 disabled

    spinning balls and windows logo with that goes noware
    still stuck in safe mode with Net



      My ComputerSystem Spec
  3.    22 Jul 2016 #3
    Join Date : Jul 2016
    Posts : 4
    win 10 pro safe mode with net
    Thread Starter

    Still Stuck,


    I am now using latest Nvidia driver, with intel disabled.
    Atleast now there is no crash - its worse as now it just sits quietly with spinning dots and windows logo the numlock and image flashes once then keyboard goes unresponsive, am just meant wait like this or is it not working as it should.

    Please help
    Thanks before hand
      My ComputerSystem Spec
  4.    22 Jul 2016 #4
    Join Date : May 2016
    Texas
    Posts : 140
    Windows 10 Pro 64-bit

    I would have checked device manager for exclamation marks on devices, because of faulting drivers, before updating the BIOS. A google search for the driver displayed in your BSOD indicates that your Intel graphics driver seems to be causing you problems.

    I would give this a shot: http://www.intel.com/p/en_US/support/detect
      My ComputerSystem Spec
  5.    22 Jul 2016 #5
    Join Date : Jul 2016
    Posts : 4
    win 10 pro safe mode with net
    Thread Starter

    Thanks for your reply


    Quote Originally Posted by roblinb View Post
    I would have checked device manager for exclamation marks on devices, because of faulting drivers, before updating the BIOS. A google search for the driver displayed in your BSOD indicates that your Intel graphics driver seems to be causing you problems.

    I would give this a shot: http://www.intel.com/p/en_US/support/detect
    Thanks for your reply,
    I've dropped back to 7 to see if can load as many 8.1 and ten listed drivers. Before I upgrade again. The funny thing is when I've upgraded before everything goes OK. It after I restart for the first time in ten it goes all wrong. Ill use Intel tool to get the latest driver as you suggest. I suspect when I restart I'll get the same error I have tried several of the Intel win 10 64bit driver for 4000 gfx chipset i did hit a wall as I was stuck in safe mode I couldn't run driver installer as intended, so I had to extract and install inf file.

    Sorry for scatty brain dump as preparing dinner as we speak, I'll check back in 2 lh or so after upgrade has completed.

    Thanks again
    Pat
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Win 7 -> Win 10 upgrade - can I do a clean install instead of upgrade?
Hi Guys, I'm trying to upgrade a Windows 7 Ultimate 64-bit machine to Win 10 Pro 64-bit. Ideally I want a clean install... I tried using the method that worked before on other PCs (Media Creation Tool -> Upgrade this PC) but I got a BSOD when it...
Installation and Upgrade
List Compelling Reasons to upgrade to Upgrade to Windows 10 for Novice
I feel that we as experts on this forum should try and persuade any novices who are not sure about upgrading to Windows 10 should help explain why its good for them to upgrade from earlier versions. So I'll start off: Latest security ...
General Support
re-use of Win7 upgrade dvds after Win10 upgrade
I have some Win 7 upgrade dvds from Microsoft, previously used on pc's that have now been upgraded to Win 10. Q: Can I use a Win 7 upgrade on an old Win XP unit ? Will it be refused as an already used key ? What I am aiming to accomplish is...
General Support
10 upgrade failed, clean installed 7 but now cant upgrade again.
Hi All Had Win 7 Ultimate 64 Bit OEM-SLP on HP laptop and got the Get Windows 10 icon a few weeks ago. Reserved copy but as it didnt download i went to Microsoft and downloaded the Media Creation tool to upgrade that way. After install all worked...
Installation and Upgrade
W10 Insider Prev upgrade to Win10 full vs of W7/8 upgrade to W10
Read somewhere that the latest Win 10 Insider Prev will be upgrades to Win 10 full when it is released. A good idea to install this sooner rather than upgrading Win 7 / 8.1 to 10?
Windows Insider
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:45.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums