Windows 10: boot problems after clean install from usb stick to SSD

  1.    05 Jul 2016 #1

    boot problems after clean install from usb stick to SSD


    I bought a new 250 GB SSD and wanted to perform a clean install of windows 10. I installed windows from a USB stick and all seemed to go well until installation finished and I attempted to reboot removing the usb stick after first changing bios to boot from SSD. It wont boot from SSD without the memory stick in. When I look at the drive in disc management its showing as follows;



    volume -layout - type - file system. - status capacity free space %FREE
    - simple basic - Healthy (RECOVERY partition) 450 MB 50 MB 100%

    - simple basic - Healthy (EFI SYSTEM partition ) 99MB 99MB 100%

    (C simple basic NTFS Healthy (Boot, page file, crash dump, primary partition,)232.33GB 207.03GB 89%


    ESD-USB(D simple basic FAT32 Healthy (Active, primary partition) 14.54GB 10.43GB 72%

    I think some installation files have been left on the memory stick but not sure which ones are needed, I may be wrong.
    It boots well with usb in but once removed and bios pointed to start from ssd it tells me to insert media and hit any key to continue as if it cant find system on ssd. Windows files are on there and I did install it to ssd but don't know what else to do from here.
    Please can someone help.
    Thanks
    boot problems after clean install from usb stick  to SSD Attached Files
      My ComputerSystem Spec


  2. Posts : 1,841
    Windows 3.1 to Windows 10
       05 Jul 2016 #2

    The PC boot files where created on the USB Stick....

    Insert USB stick and boot into window...
    remove USB stick...
    open command prompt(admin) and type

    bcdboot c:\windows

    reboot PC without USB Stick Inserted - it should now boot into windows properly..
      My ComputerSystem Spec


 

Related Threads
clean install problems in Installation and Upgrade
Can't get serial number to take, windows7 is activated. When I try windows 10 it says serial number wrong?, product id is bottom of labtop. If I use a serial number program it comes up with different serial?. This is a legal copy of windows 7...
I upgraded to windows 10 from windows 7 and then performed a clean install of windows 10. I have being having problems with my USB 3.0 ports which were not present in windows 7. Every time I turn on my computer running windows 10 I get an error...
I bought a new SSD drive and used it to replace my old slow HDD in my laptop. I have just successfully installed windows 10 on it. During the step shown in the picture below, I clicked on "New" 50340 Which brought me to this step 50337 From...
Hello, I recently upgraded to Windows 10 and decided to do a clean install afterwards. The install took three days of messing about, trying discs and USB stick method etc. but finally worked only after I disabled the network card in BIOS. Since...
I had made a clean install of Windows 10 on an older computer without any issues. Then I tried to do a clean install on a newer EFI-based computer. I had trouble like many others once I tried to install to a GPT partition having booted from a USB...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:31.
Find Us