Windows 10: New HDD, 2nd windows install. Need help Solved

  1. Posts : 7
    Windows 10 Pro 64-bit
       30 Jun 2016 #1

    New HDD, 2nd windows install. Need help

    I stuck a new HDD into PC and is currently set as 2nd HDD.
    It is blank and new.
    What I want to do is install windows 10 on this drive , and set it to the main boot.
    The problem I am having is what is my best option.
    Do I do a windows 7 install on new HDD from DVD? or Flash Drive?
    Is there something I can load onto the new HDD that will start installing windows 10 on it?
    If I do traditional DVD install do I leave key empty and start installing updates ?

    The main reason I am doing a HDD change is because the old HDD is starting to fail.
    Will still put the old HDD as second boot, so can still get the data off of it.
    What data should I make sure I copy? Was thinking USER folder.
      My ComputerSystem Spec

  2.    01 Jul 2016 #2

    As far as cloning/imaging goes, I would recommend using Macrium Reflect Free, and make an image of your entire current HDD (all partitions), and include the "verify" option when making it. Then, I would restore that image to the new HDD.

    Then (if needed) download the windows 10 setup media > Windows 10
    Choose create media for Another PC and then create USB

    After creating the media on usb - just run Setup.exe to upgrade to windows 10
      My ComputerSystem Spec

  3. RWOne's Avatar
    Posts : 486
    Windows 10 Pro (Mix of Builds) / Linux Mint
       01 Jul 2016 #3

    Seconded. Definitely do the verify, last thing you need is if the 1st drive glitches during the procedure.
      My ComputerSystem Spec

  4.    01 Jul 2016 #4

    If you want to do a clean install to the new hard drive, then you will want to disconnect the old hard, connect the new hard on its place as the first hard drive, and leave the old one disconnected.

    Boot the computer from a Windows 10 USB flash drive or DVD. Skip entering a product key, if asked. Install the same Home or Pro you had before. Select the custom install option, delete any existing partitions in the list (new hard drive should not have any). Click next to install to the unallocated space.

    Windows 10 should activate itself. Then reconnect your old hard drive as the second hard drive. If you don't do it that way you will probably get the boot files for new Windows 10 installed into the old hard drive and end up with a mess.
      My ComputerSystem Spec

  5. Posts : 7
    Windows 10 Pro 64-bit
    Thread Starter
       01 Jul 2016 #5

    Ok what I did is load windows 10 exe on a flash drive. Then told my friend ( the one updating PC) to shut PC down, unplug the old HDD, then boot from USB.
    It should work flash is bootable.
    Then told him to install windows as normal.
    Once done reconnect old HDD. and start installing software on new HDD, and any settings, bookmarks etc. move from old to new.
    This should work, but probably wont be until next week when he gets it done
      My ComputerSystem Spec

  6. Posts : 7
    Windows 10 Pro 64-bit
    Thread Starter
       06 Jul 2016 #6

    Well tried today.
    Ended up trying from a USB drive. But did not want to boot in the bios for some reason. USB was seen fine, just didnt boot.
    I then tried to do install using DVD, but the drive was an old IDE, so used an adapter to hook to USB.
    That failed as well. It kept kicking back to second boot selection.
    Went to WinToHDD, installed software and started process of cloning.
    All was going well, it rebooted to new HDD and then failed as it hit 100%. Took a few hours to do it this way.
    Had to download the ISO from windows site.
    And tried WinToHDD again with loading from the ISO onto the new HDD.
    That finally worked.
    Now just to get programs situated on the new HDD and move some files over and it should be golden.

    Thank you for all the help and suggestions, it really helped.
      My ComputerSystem Spec


Related Threads
I'm unable to get windows to install properly properly and have spent the around 20 hours in total trying to troubleshoot it the last 2 days. It started with a failed overclock attempt, and reseting uefi to default settings. When I booted up...
Using the DISM, restorehealth, etc.. all do not seems to work. Advise. Spend 3 days doing it... even reformatting and reinstall OS.
Hi I have looked through solutions for this issue, but the suggestions don't seem to fix my issue... I am running Windows 7 SP1 Pro 64-bit on a Dell Optiplex 760, and try to do a clean install of Windows 10, using the ISO file which I downloaded...
Whenever I log on, I get a black screen with a cursor. I can access my files and go online through task manager but my desktop doesn't load up. This has led me to believe that maybe that part of the install went bad and those files were never made...
I have searched all over google trying to resolve this issue and cant seem to find an answer. I have tried twice to install windows 10 using the auto update. Both times it gets to the screen where it loads files, drivers, etc. It downloads the files...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 15:21.
Find Us