Windows 10: new m.2 pcie ssd

Page 3 of 3 FirstFirst 123

  1. Posts : 8,858
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       21 Jun 2016 #21

    fdegrove said: View Post
    Hi,



    As it shows in the screenshot of disk management it can't boot from drive 0 on its own. It needs disk 1 to do so.
    Hence my recommendations, either copy the system partitions from disk one to disk 0 or remove all other drives bar the M2 and reinstall W10 so it can create all required partitions for a UEFI install.
    I prefer the latter as it should be faster unless TS has already a ton of software installed.

    Cheers,

    EDIT: Sorry for the cross posting, Essenbe.
    No problem, you had it right to begin with.
      My ComputersSystem Spec


  2. Posts : 733
    Windows 1.00 to Windows 10 Pro 64-bit Build 14971.1000
    Thread Starter
       21 Jun 2016 #22

    Ok geting late. Will report back tomorrow
      My ComputerSystem Spec


  3. Posts : 733
    Windows 1.00 to Windows 10 Pro 64-bit Build 14971.1000
    Thread Starter
       21 Jun 2016 #23

    OK. I disabled the old C: drive in the bios. Then I installed Build 14367 on the new M.2 SSD. I used the UEFI boot option and windows made the four partitions on the M.2 SSD. Up and running.


    EDIT: Thanks for all the help everyone.
      My ComputerSystem Spec


  4. Posts : 8,858
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       21 Jun 2016 #24

    Glad you have it running like you want.
      My ComputersSystem Spec


  5. Posts : 733
    Windows 1.00 to Windows 10 Pro 64-bit Build 14971.1000
    Thread Starter
       21 Jun 2016 #25

    essenbe said: View Post
    Glad you have it running like you want.
    I'm guessing the M.2 "bios" screen doesn't stay on the screen very long.
      My ComputerSystem Spec


  6. Posts : 733
    Windows 1.00 to Windows 10 Pro 64-bit Build 14971.1000
    Thread Starter
       22 Jun 2016 #26

    I cleaned installed 14367 on the M.2 SSD. Build runs a lot faster.

    The other two drives I cleaned with DISKPART and converted them to GPT.

    Most of my Data is on my NAS4FREE NAS.
      My ComputerSystem Spec


  7. Posts : 8,858
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       22 Jun 2016 #27

    Great, I'm glad it is working well for you. Fdegrove deserves most of the credit for helping you.
      My ComputersSystem Spec


 
Page 3 of 3 FirstFirst 123

Related Threads
adding a USB 3.0 PCIE in Drivers and Hardware
Guys, I have a not so old CPU and I am getting frustrated with the transfer speed (since the mother board only supports USB 2.0) and I was planning to upgrade my motherboard to I could take advantage of the 3.0 transfer speed. While shopping for a...
I just bought an ASUS PCE-N53 PCI-E adapter for my PC that I built several months ago. Previously, I was just using ethernet. Put the card in my PCI-E 1 slot, and installed the drivers from the installation disc, but nothing shows up in Device...
Using a PCIe x1 card in a PCIe x16 slot in PC Custom Builds and Overclocking
Here is something I recently found out. I have tired this and it works. You can use a PCIe x1 card, or a PCIe x4 card in a PCIe x16 slot. They work fine. So if you think you are short of PCI-e slots, you may not be. A shorter PCIe card works fine...
Solved How to install a PCIe SSD? in PC Custom Builds and Overclocking
I bought a Predator PCIe SSD to install in my desktop. The adapter for the SSD has the obvious PCI connection but it also has a SATA connection. Do I need to connect the SATA cable to the motherboard as well as inserting the PCIe card for it to...
Here is something I recently found out. I have tired this and it works. You can use a PCIe x1 card, or a PCIe x4 card in a PCIe x16 slot. They work fine. So if you think you are short of PCI-e slots, you may not be. A shorter PCIe card works...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:51.
Find Us