How To Burn Win10 ISO as UEFI?

Page 1 of 2 12 LastLast
  1.    24 May 2016 #1

    How To Burn Win10 ISO as UEFI?


    I've been googling around but still I can't find a way to burn an ISO into a disc as UEFI.

    I know I can just simply use Rufus to create a UEFI bootable ISO but I would also like to learn how to burn it into a blank DVD disk as UEFI compatible.

    Thanks!
      My ComputerSystem Spec

  2.    24 May 2016 #2

    The windows 10 ISO supports booting both UEFI and Legacy Mode..
    Mount the ISO and Copy the contents of the ISO to your DVD Burner (a USB Stick is the preferred method of choice)
    Then use the F12 BootMenu to select the UEFI DVD Device as the Bootable device
      My ComputerSystem Spec

  3.    24 May 2016 #3

    Or if you have DVD burning software that supports ISO files as a source, such as IMGBURN, just pick the ISO file as the source and let the software burn the DVD from it.
      My ComputerSystem Spec

  4. Slartybart's Avatar
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       24 May 2016 #4

    Freecs said: View Post
    I've been googling around but still I can't find a way to burn an ISO into a disc as UEFI.

    I know I can just simply use Rufus to create a UEFI bootable ISO but I would also like to learn how to burn it into a blank DVD disk as UEFI compatible.

    Thanks!
    The file system on a disc is UDF - so there are no special UEFI considerations for putting the ISO on a DVD.

    The issue with a USB is that it can be formatted with any file system - for a UEFI install, a USB must be formatted FAT32.

    You also don't need any special burning software - the built-in Burn utility (Win8, Win10) works just fine.

    After downloading the ISO, right click the file and select burn disc image
    Pick the DVD drive and press burn
      My ComputerSystem Spec

  5.    26 May 2016 #5

    NavyLCDR said: View Post
    Or if you have DVD burning software that supports ISO files as a source, such as IMGBURN, just pick the ISO file as the source and let the software burn the DVD from it.
    That's exactly what I did. The problem is, the machine I'm formatting only reads UEFI supported OS.

    Sure I can just set the boot option to Legacy support but I can't create a partition because the machine uses a GPT partition.
      My ComputerSystem Spec

  6.    26 May 2016 #6

    And the DVD is UEFI compatible.

    http://winaero.com/blog/install-windows-10-using-uefi-unified-extensible-firmware-interface/
      My ComputerSystem Spec

  7.    26 May 2016 #7

    Slartybart said: View Post
    You also don't need any special burning software - the built-in Burn utility (Win8, Win10) works just fine.

    After downloading the ISO, right click the file and select burn disc image
    Pick the DVD drive and press burn
    So, by following this step I can then create a UEFI supported OS? Also, is there a way to do this in Windows 7?
      My ComputerSystem Spec

  8.    26 May 2016 #8

    NavyLCDR said: View Post
    http://winaero.com/blog/install-windows-10-using-uefi-unified-extensible-firmware-interface/
    The steps still requires bootable USB.
      My ComputerSystem Spec

  9.    26 May 2016 #9

    Kyhi said: View Post
    Mount the ISO and Copy the contents of the ISO to your DVD Burner
    Could you elaborate more on this instruction?
      My ComputerSystem Spec

  10.    26 May 2016 #10

    Freecs said: View Post
    The steps still requires bootable USB.
    A DVD burned from the ISO file is UEFI compatible - it will both boot in UEFI mode and capable of installing Windows 10 in UEFI mode. No bootable USB flash drive is required.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
I already did a clean install of Win10 on my Dell laptop which does seem to support UEFI mode when I went through the BIOS setup screen. My current BIOS setup is using the Legacy BIOS mode. My question is, if I do decide to enable UEFI with Secure...
On a UEFI PC, do you know if it is possible to run dual boot with first OS being the PC's original activated Windows 10 and second OS being Windows 10 in trial mode ? The issue is that the PC has a UEFI Bios which I am told automatically assigns...
Hello, I'm currently reinstalling entirely windows 10 x64 with uefi , hardware fast boot, and secureboot. I'm a bit confused because win 10 installer set: Recovery on partition 1 System on partition 2 (win re) MSR (not formated) 3 Then...
I did that with 8.1 pro and successfully restored a broken install, booted dvd and repaired the pc. Then I upgraded to windows 10 using the media tool and it is working fine. But I do not have an iso of win10 burnt to a dvd. Will I need a...
I've been an insider since FEB. Last ISO I installed was 10074. Since updating to 10240/rtm things have gotten buggy, apps don't function, can't update etc. I want to install the latest ISO on the 10240 oartition, but when I try I get,...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:22.
Find Us