Page 1 of 2 12 LastLast
  1.    28 Mar 2015 #1
    Join Date : Oct 2014
    Posts : 1,555
    W7 32 bit, Linux Mint Xfce 18 64 bit

    Windows 10 upgrade error 0xc1900101-0x30018 is back.


    Don't know what program/driver/windows update is causing it. This could be an issue for upgrading. There is one other method I haven't tried. See, Microsoft wants you to upgrade to the free version. Looks more like I will be sticking with the windows 7. If you can't use it, you can't upgrade. You would figure Microsoft would know what they are doing, but I am not so sure.

    Is windows 10 required to be installed on the 1st partition, this could be issue as well because some Oem use the 1st primary partitions.

    This method I haven't tried
    Install Clean windows 7
    Install Chipset drivers
    Then install Ethernet drive
    Then install windows 10.
    Then install all your software

    I haven't tested this build in a virtual machine either.
      My ComputerSystem Spec
  2.    28 Mar 2015 #2
    Join Date : Nov 2013
    Idaho USA
    Posts : 4,826
    OS X, Win 10

    Hmmmmm!. . .I wouldn't jump to conclusions as of yet there Groze. There is still time for MS to fix whatever problems you seem to have been able to identify. At this point I am still looking at staying with Win 8.1 on my main computer, and using the free on my old Dell with the OEM upgraded to the free copy of win 10.
      My ComputerSystem Spec
  3.    28 Mar 2015 #3
    Join Date : Oct 2014
    Posts : 1,555
    W7 32 bit, Linux Mint Xfce 18 64 bit
    Thread Starter

    Quote Originally Posted by Lee View Post
    Hmmmmm!. . .I wouldn't jump to conclusions as of yet there Groze. There is still time for MS to fix whatever problems you seem to have been able to identify. At this point I am still looking at staying with Win 8.1 on my main computer, and using the free on my old Dell with the OEM upgraded to the free copy of win 10.
    @Lee
    I noticed in a couple of threads people are not being able to upgrade to the build or even able to do clean install but each got different error.



    I even read one post that chucksum was not correct.
    Last edited by groze; 28 Mar 2015 at 17:47.
      My ComputerSystem Spec
  4.    28 Mar 2015 #4
    Join Date : Jan 2014
    Oak Ridge TN, USA
    Posts : 24,523
    Windows 10 Pro x64

    Quote Originally Posted by groze View Post
    @Lee
    I noticed in a couple of threads people are not being able to upgrade to the build or even able to do clean install but each got different error. I even read one post that chucksum was not correct.
    The person had a bad download and that's why he had the issue. It had nothing to do with Win10. In addition.. you just jump to conclusions to fast.. give MS time to get the bugs out before you judge what Win10 will and can do. But if you want to keep Win7.. please do.
      My ComputerSystem Spec
  5.    28 Mar 2015 #5
    Join Date : Oct 2014
    Posts : 1,555
    W7 32 bit, Linux Mint Xfce 18 64 bit
    Thread Starter

    Quote Originally Posted by BunnyJ View Post
    The person had a bad download and that's why he had the issue. It had nothing to do with Win10. In addition.. you just jump to conclusions to fast.. give MS time to get the bugs out before you judge what Win10 will and can do. But if you want to keep Win7.. please do.
    I wasn't just referring to just that post. I was also referring to this thread, where a few people had install or upgrade issues.
      My ComputerSystem Spec
  6.    28 Mar 2015 #6
    Join Date : Jan 2014
    Oak Ridge TN, USA
    Posts : 24,523
    Windows 10 Pro x64

    Quote Originally Posted by groze View Post
    I wasn't just referring to just that post. I was also referring to this thread, where a few people had install or upgrade issues.
    When the RTM comes out you just might have to skip Win10 due to your hardware issues. My hardware is only about a year or so old and WIn10 installs/works just fine. Let's face it.. some hardware will just not work with Win10 no matter what we/you do.. I had that issue with my previous PC where I couldn't use WIn8/Win8.1.1 due to issues with the chip-set not being current enough.
      My ComputerSystem Spec
  7.    28 Mar 2015 #7
    Join Date : Oct 2014
    Posts : 1,555
    W7 32 bit, Linux Mint Xfce 18 64 bit
    Thread Starter

    Quote Originally Posted by BunnyJ View Post
    When the RTM comes out you just might have to skip Win10 due to your hardware issues. My hardware is only about a year or so old and WIn10 installs/works just fine. Let's face it.. some hardware will just not work with Win10 no matter what we/you do.. I had that issue with my previous PC where I couldn't use WIn8/Win8.1.1 due to issues with the chip-set not being current enough.
    Yeah, I know but previous builds worked. I know I tried a couple of them and even upgraded without an issue. I suspect somethings with this new build as you can see by the questions I posted in that thread. However, those are just theories or hypothesis.
      My ComputerSystem Spec
  8.    28 Mar 2015 #8
    Join Date : Jan 2014
    Oak Ridge TN, USA
    Posts : 24,523
    Windows 10 Pro x64

    Quote Originally Posted by groze View Post
    Yeah, I know but previous builds worked. I know I tried a couple of them and one even upgrade without an issue. I suspect somethings with this new build as you can see by the questions I posted in that thread. However, those are just theories or hypothesis.
    I know that I had to ditch my old graphic card due to issues setting the BIOS to secure boot mode. When I did that I was able to update to Win10 10041. But I knew that I had that issue because when I installed WIn8.1 I had a message on my desktop saying that there was an issue.

    I suspect that with this build MS had modified the requirements so that it made issues in your case. What happens when you perform a clean install? And, yes I know you want to perform and update from Win7 but it would eliminate the hardware as an issue.
      My ComputerSystem Spec
  9.    28 Mar 2015 #9
    Join Date : Oct 2014
    Posts : 1,555
    W7 32 bit, Linux Mint Xfce 18 64 bit
    Thread Starter

    Quote Originally Posted by BunnyJ View Post
    I know that I had to ditch my old graphic card due to issues setting the BIOS to secure boot mode. When I did that I was able to update to Win10 10041. But I knew that I had that issue because when I installed WIn8.1 I had a message on my desktop saying that there was an issue.

    I suspect that with this build MS had modified the requirements so that it made issues in your case. What happens when you perform a clean install? And, yes I know you want to perform and update from Win7 but it would eliminate the hardware as an issue.
    @BunnyJ

    Your old graphics card wouldn't happened to be intel hd graphics would it?
      My ComputerSystem Spec
  10.    28 Mar 2015 #10
    Join Date : Jan 2014
    Oak Ridge TN, USA
    Posts : 24,523
    Windows 10 Pro x64

    Question?? When you did the update from WIn7 to Win10 b10041 did it work right off the bat or did you get any errors?? And then what did you do between the time it worked and you started to get the error messages?? If it worked right off the bat make a list of the things you did.. installed apps/software/programs/tweaks and list them here.. this might help diagnose the issue.
      My ComputerSystem Spec

 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
Solved Windows 10 Error code 0xc1900101-0x30018
Upgrading a Windows 8.1 installation and it stuck at getting devices ready at 2%. No BSOD. Has to be specific to 8.1 as I have already installed 10 on a clean partition with no issues on this machine. All drivers up to date. Did try removing Avast....
Installation and Upgrade
Solved Error 0xC1900101 - 0x20017 When Upgrading to Build 10162
Hi, I'm running Windows 10 Pro Build 10159 and I can't upgrade to build 10162. I tried to update through Windows Update and through the ISO, but when I need to restart my PC, it boots to Recovery Mode (giving me 2 options: 1. Turn off my PC, 2....
Installation and Upgrade
Upgrade to 10122 gets error fbl_impressive Professional 10122 - Error
I upgraded to 10074 with no problems but trying to upgrade to 10122 gets error fbl_impressive Professional 10122 - Error 0xd0000225. I'm logged into my Microsoft account, so I don't think that's the problem. I've cleaned up all the files and...
Installation and Upgrade
Indtallation failed with 0xC1900101-0x30017, DP500A2D Samsung AIO.
I am running Samsung Series 5 AIO DP500A2D-K01UB PC running Winows 10 TP build 9841. I could not install lastest Windows 10 TP build 9926. Upgrading itself appeared to work fine. Upon reboot, I had no display after setting up 100%. After several...
Installation and Upgrade
Can't upgrade to latest build - error: 0x80070050
I just installed the Windows 10 TP and wanted to upgrade to the latest build to get all of the new features, but whenever I try to upgrade this error is thrown at me, and I can't find anything about it online. Screenshot by Lightshot Any help...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:47.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums