Upgrading Toshiba Win7 laptop to Win 10 via clean install on new SSD


  1. BJB
    Posts : 26
    Windows 7
       #1

    Upgrading Toshiba Win7 laptop to Win 10 via clean install on new SSD


    I went through quite a few upgrades when Windows 10 arrived but have taken a break and don't feel up to speed on what has changed regarding upgrading with a "clean install". I am familiar with the Media Creation tool but used that for upgrades, and have a question on the product key and activation.

    So I have a Toshiba laptop C655-S5312 as-shipped with a mechanical drive running Windows 7. I would like to replace the mechanical hard drive with an SSD and clean install windows 10. I know in the past you had to upgrade the original OS and hard drive first to 10 and then put in the new drive.

    Am I correct that now I no longer need to do that? And if so, what is the correct process? If I grab the product key for Windows 7 as-shipped and then install windows 10 (will the media creation tool work or will I need a full windows 10 image?) can I then just input the windows 7 key?

    I have seen some conflicting info on this (probably because things have changed since the release) although I believe it is better than when I went through this a few times right at the launch.

    Any help appreciated.
    Thanks,
    BJB
      My Computer


  2. Posts : 18,424
    Windows 11 Pro
       #2

    You're best bet to guarantee that the new install will activate would be simply to capture the genuineticket.xml file from the Windows 7 installation:

    Clean Install Windows 10 Directly without having to Upgrade First - Windows 10 Forums
      My Computer


  3. Posts : 1,983
    Windows 10 x86 14383 Insider Pro and Core 10240
       #3

    BJB said:
    I went through quite a few upgrades when Windows 10 arrived but have taken a break and don't feel up to speed on what has changed regarding upgrading with a "clean install". I am familiar with the Media Creation tool but used that for upgrades, and have a question on the product key and activation.
    I am reading between the lines here, are you saying that you have had Windows 10 on this machine already, as an upgrade - is that correct? Was it activated at that time? If so, it will have digital entitlement, and should activate OK.

    If Windows 10 is already running on the hard disk, clone to SSD, install the SSD, make sure all works well, and make sure it is fully updated and go to *

    If not, have you had confirmation that Windows 10 will run on your Satellite C655-S5312, as in the following Toshiba forum thread? :

    Solved: Windows 10 "Check your PC" - TOSHIBA FORUMS

    It is likely your processor which has integrated Intel HD graphics, will not be fully supported with drivers from Intel, and may experience problems with clean installation.

    I would recommend that you clone your Windows 7 installation to the SSD, put aside the old hard drive safely, and once Windows 7 is updated and working well from the SSD, image it again, and then attempt an upgrade to Windows 10.

    Working with the SSD, rather than the HD ensures that all the following steps will proceed with the best speed possible.

    If the upgrade succeeds, gaining digital entitlement for the laptop, test it out for a while, * and if confident, back it up, and back up the drivers separately, and only then try the clean install, which may fail due to driver problems, or hopefully will run just fine, or will run on Windows generic drivers but require the driver backup you made.

    So I have a Toshiba laptop C655-S5312 as-shipped with a mechanical drive running Windows 7. I would like to replace the mechanical hard drive with an SSD and clean install windows 10. I know in the past you had to upgrade the original OS and hard drive first to 10 and then put in the new drive.

    Am I correct that now I no longer need to do that? And if so, what is the correct process? If I grab the product key for Windows 7 as-shipped and then install windows 10 (will the media creation tool work or will I need a full windows 10 image?) can I then just input the windows 7 key?

    I have seen some conflicting info on this (probably because things have changed since the release) although I believe it is better than when I went through this a few times right at the launch.

    Any help appreciated.
    Thanks,
    BJB
      My Computers


  4. BJB
    Posts : 26
    Windows 7
    Thread Starter
       #4

    Fafhrd said:
    I am reading between the lines here, are you saying that you have had Windows 10 on this machine already, as an upgrade - is that correct? Was it activated at that time? If so, it will have digital entitlement, and should activate OK.

    If Windows 10 is already running on the hard disk, clone to SSD, install the SSD, make sure all works well, and make sure it is fully updated and go to *
    .
    Sorry for the confusion....my earlier Windows 10 upgrades were with other systems. I just took a "tech break". I was hoping to get this basic laptop on Windows 10 just for very basic work. However there is a lot of junk on there so I wanted to do a clean install. I know the old drill of upgrading to 10 on the old hard drive first. Was just hoping I would not have to go that route.

    I will have to do a more deep dive on compatibility. I had upgraded other i3 machines with integrated graphics so had not given it a second thought. Don't care if all the to shiva software runs...but yeah, need the video drivers.

    BJB
      My Computer


  5. Posts : 1,983
    Windows 10 x86 14383 Insider Pro and Core 10240
       #5

    Tnx for clarification, best of luck!
      My Computers


  6. Posts : 18,424
    Windows 11 Pro
       #6

    Here's the way I see it. You capture the genuineticket.xml file from the old HDD. You replace the old HDD with the new SSD. You do a clean install of Windows 10 to the SSD and use the genuineticket.xml file to activate it.

    If you find drivers for everything and it all works you're good to go, right?

    If it fails miserably, then what have you lost? Nothing but time. You pop the old HDD back in and move on to Plan B.
      My Computer


  7. BJB
    Posts : 26
    Windows 7
    Thread Starter
       #7

    Navylcdr,
    Thanks, that makes perfect sense! Will read up on that genuine ticket method. The link implied I could also use the Windows 7 key to validate Windows 10?

    BJB
      My Computer


  8. Posts : 18,424
    Windows 11 Pro
       #8

    You should be able to activate Windows 10 with the Windows 7 product key - but capturing the genuineticket.xml file takes less than 2 minutes and is very good insurance in case the Windows 7 product key does not work.

    Remove the HDD and install the SSD between steps 6 and 7:
    Clean Install Windows 10 Directly without having to Upgrade First - Windows 10 Forums
      My Computer


  9. BJB
    Posts : 26
    Windows 7
    Thread Starter
       #9

    Awesome! Thanks.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:40.
Find Us




Windows 10 Forums