How to make an SSD the exclusive boot device?

Page 1 of 7 123 ... LastLast

  1. Posts : 54
    Windows 10 64bit
       #1

    How to make an SSD the exclusive boot device?


    I have a dell xps desktop. It came with a standard HDD with windows 10. I added an SSD when I bought it and have used that for the OS and applications, I was able to set it to boot to that drive, I formatted the HDD that came with the computer and used it as storage. This has been the case for around 3 months. Yesterday, the storage drive (the one that came with the OS and whatnot) was wiped with killdisk, not just re-formatted. Once the kill disk was completed I was still using the internet as usual with the SSD, since I had it as primary. I noticed I didn't see the storage drive listed under computer, so I rebooted. Now, It wouldn't boot to the ssd because I assume the original HDD has the boot manager on it, but the whole disk was zero'd. I installed 8.1 onto the HDD. I can now see my 224gb SSD in disk management. I just want to know how to make the ssd the
    exclusive drive that runs the os, boot manager etc on this computer. Here is a pic of my disk managemt
    How to make an SSD the exclusive boot device?-dm.png
      My Computer


  2. Posts : 4,131
    Windows 3.1 to Windows 11
       #2

    unplug the HDD
    boot to your setup media
    select repair this computer
      My Computer


  3. Posts : 18,424
    Windows 11 Pro
       #3

    Kyhi said:
    unplug the HDD
    boot to your setup media
    select repair this computer
    I would also recommend you plug the SSD in to the first SATA port - apparently where the HDD is now. After you get the SSD booting by itself, plug the HDD into the second SATA port.

    Once you get the SSD booting by itself, and the plug the HDD back in, you can delete the system reserved partition from the HDD and expand the data partition into the free space using MiniTool Partition Wizard.
      My Computer


  4. Posts : 4,131
    Windows 3.1 to Windows 11
       #4

    If he is like me - Dell XPS8700
    He installed a mSATA card into the onboard card slot - SATA Port 5

    Thus SSD is Disk 1 because HDD is Disk 0
      My Computer


  5. Posts : 18,424
    Windows 11 Pro
       #5

    Kyhi said:
    If he is like me - Dell XPS8700
    He installed a mSATA card into the onboard card slot - SATA Port 5

    Thus SSD is Disk 1 because HDD is Disk 0
    Had not thought of that
      My Computer


  6. Posts : 54
    Windows 10 64bit
    Thread Starter
       #6

    Kyhi said:
    unplug the HDD
    boot to your setup media
    select repair this computer
    I tried to to the repair and it fails. AS I said, I have an OS on the HSS and I see the SSD, there is nothing wrong with the SSD I just want to know how get the MBR or bootmanager onto the SSD, as I will not use the HDD for anything other than storage once I can complete this
      My Computer


  7. Posts : 54
    Windows 10 64bit
    Thread Starter
       #7

    NavyLCDR said:
    I would also recommend you plug the SSD in to the first SATA port - apparently where the HDD is now. After you get the SSD booting by itself, plug the HDD into the second SATA port.

    Once you get the SSD booting by itself, and the plug the HDD back in, you can delete the system reserved partition from the HDD and expand the data partition into the free space using MiniTool Partition Wizard.
    It will not boot to the SSD because, what I assume is, is that originally it was dependant on the HDD, as that had the bootmanager on it.
      My Computer


  8. whs
    Posts : 1,935
    Windows 7
       #8

    Use this tutorial but instead of C, change it to D. Then you have to change the boot sequence in the BIOS to the D disk (disk1).

    Bootmgr - Move to C:\ with EasyBCD - Windows 7 Help Forums
      My Computer


  9. Posts : 54
    Windows 10 64bit
    Thread Starter
       #9

    whs said:
    Use this tutorial but instead of C, change it to D. Then you have to change the boot sequence in the BIOS to the D disk (disk1).

    Bootmgr - Move to C:\ with EasyBCD - Windows 7 Help Forums
    Thanks man, change which one to "D"? The SSD is already listed as D. Are you saying make the HDD (the current C drive) the "D" Drive?
      My Computer


  10. whs
    Posts : 1,935
    Windows 7
       #10

    When you boot from the SSD, the letters will change automatically. You need not change letters.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:53.
Find Us




Windows 10 Forums