Windows 10: Upgrade error 0xC1900101-0x2000C

Page 1 of 2 12 LastLast
  1.    17 Dec 2015 #1

    Upgrade error 0xC1900101-0x2000C


    I have made several attempts to upgrade my desktop from 8.1 to 10. Each time the install freezes at the "copying files = 3%" point. When I reboot the system returns to my 8.1 setup and shows the above code with this explanation. "Installation failed in SAFE_OS phase with an error during APPLY_IMAGE operation"

    Can anyone tell me what this means and how to resolve the issue?
      My ComputerSystem Spec


  2. Posts : 3,033
    Windows 10 Pro 64 bit
       17 Dec 2015 #2

    canuck257 said: View Post
    I have made several attempts to upgrade my desktop from 8.1 to 10. Each time the install freezes at the "copying files = 3%" point. When I reboot the system returns to my 8.1 setup and shows the above code with this explanation. "Installation failed in SAFE_OS phase with an error during APPLY_IMAGE operation"

    Can anyone tell me what this means and how to resolve the issue?
    You are doing this from files that were downloaded to this PC and told you it was ready to install the upgrade ?
      My ComputerSystem Spec

  3.    17 Dec 2015 #3

    No, doing it from and iso downloaded on a usb stick. I already used the iso to successfully upgrade my laptop.
      My ComputerSystem Spec


  4. Posts : 3,033
    Windows 10 Pro 64 bit
       17 Dec 2015 #4

    canuck257 said: View Post
    No, doing it from and iso downloaded on a usb stick. I already used the iso to successfully upgrade my laptop.
    Meaning never received downloaded files from the Get Windows 10 app that appeared in the notification area ? Where did you download this ISO from ? Did you uninstall all third party Anti-Virus or security software prior to upgrade ?
      My ComputerSystem Spec


  5. Posts : 3,033
    Windows 10 Pro 64 bit
       17 Dec 2015 #5

    These errors can be caused by ,
    Incompatibility of hardware or software on the system
    ISO that was created is corrupt, Damaged installation source files, need to recreate it
    insufficient space on your C drive (system drive), limited space issue for upgrade.
    Remove security and system utility software, Anti-Virus, as mentioned


    Recreate the ISO, go down to step # 7 here https://www.tenforums.com/tutorials/2...tallation.html
      My ComputerSystem Spec

  6.    17 Dec 2015 #6

    I'll give these a try, thanks and report back.
      My ComputerSystem Spec


  7. Posts : 3,033
    Windows 10 Pro 64 bit
       17 Dec 2015 #7

    canuck257 said: View Post
    I'll give these a try, thanks and report back.
    Your welcome, let us know.
      My ComputerSystem Spec

  8.    18 Dec 2015 #8

    The Get Windows 10 app does not yet allow me to upgrade but will notify me when an upgrade for my PC is available. I've tried all the other suggestion that you made and come up with the same error.
    I am now downloading a new iso from this forum link.

    Fingers crossed.
      My ComputerSystem Spec


  9. Posts : 3,033
    Windows 10 Pro 64 bit
       18 Dec 2015 #9

    canuck257 said: View Post
    The Get Windows 10 app does not yet allow me to upgrade but will notify me when an upgrade for my PC is available. I've tried all the other suggestion that you made and come up with the same error.
    I am now downloading a new iso from this forum link.

    Fingers crossed.
    How long has it been since you received the Windows 10 App and did you agree,reserve it for the upgrade and now your saying it was never ready to do this upgrade, but you proceeded to do it from a ISO ? Do you know if all was ever shown to be compatible with your system to upgrade to Windows 10 then ? Any notifications if you then reserved your upgrade about any system incompatibility ?
    Be concerned if anything was incompatible or what exactly is shown for you, to then go ahead and do it this way through the disc.

    As i do not know anything about system you are putting it on, no specs in your profile, as it is always best to fill in as much as you can, at least the make and model of PC.
      My ComputerSystem Spec

  10.    18 Dec 2015 #10

    I downloaded a new ISO and tried to upgrade again having stripped my Windows 8.1 to bare minimums. The upgrade froze at 3% and gave the same error message. I checked the upgrade app again and it said I could now upgrade so I initiated it through the app. That also failed with the same error message. I tried to download the upgrade through Windows update. That also failed. I am now resigned to stay with 8.1
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
I am trying to upgrade from Windows 7 Home Basic SP1 to Windows 10 Home , after first stage of setup when it restarts, I get an error SYSTEM_THREAD_EXCEPTION_NOT_HANDLED and then after a restart I get the message "0xC1900101 - 0x20017 The...
Solved Install error 0x8007045d -0x2000c in Installation and Upgrade
Neighbor had his HP 15 laptop fixed and returned with a new re-imaged 8.1. The problem was with a cracked LCD screen and was under warranty. This is a AMD A8 with 4 GB memory and 750 GB hard drive. He decided to upgrade to Windows 10. He run...
Error 0xC1900101-30018 in Installation and Upgrade
How do you get past this error to install Win10? Stops at "getting devies ready". Do I need to uninstall all devices to upgrade?
I received the error shown as the installation started, the first reboot after downloading the files and updates. Any ideas?
Don't know what program/driver/windows update is causing it. This could be an issue for upgrading. There is one other method I haven't tried. See, Microsoft wants you to upgrade to the free version. Looks more like I will be sticking...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:49.
Find Us