Windows 10: Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D

Page 1 of 3 123 LastLast

  1. Posts : 42
    Windows 10 Home (64-bit)
       05 Dec 2015 #1

    Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D


    I am trying to perform the November update (1511) on this computer. (starting from the previous Windows 10 version)
    Since I have another problem where it doesn't appear in Windows Update (despite fulfilling many requirements to make it appear), I am limited to perform the upgrade with the Media Creation Tool (which has re-implemented build 10586, 1511 into it after been pulled out)

    However, the upgrade process failed when reaching 76%. After system restore and reboot, the following pop-up appeared:



    Any ideas why this is happening? I upgraded this computer from Windows 7 to Windows 10 back in august, without any issue. Only now it did not find the November update through Windows Update and when using the Media Creation Tool it fails.
      My ComputerSystem Spec


  2. Posts : 639
    Windows 10 1703 Pro 64
       05 Dec 2015 #2

    I had a similar problem with my system that was upgraded from W8.1 and I decided to do a clean install with the new 1511 ISO and it is a much better running system now.

    Jim
      My ComputerSystem Spec


  3. Posts : 42
    Windows 10 Home (64-bit)
    Thread Starter
       05 Dec 2015 #3

    Sorry, but a clean install is not an option here.
    This computer is quite an old device (eMachines ET1870) and it doesn't have any hardware drivers available on the net.
    I have done a clean install before and it consumes a lot of time, something I'm short of right now. Plus, as I already said, it is only achievable with having a whole arsenal of your (up-to-date) system drivers available on a (reliable) webpage.

    There has to be an alternative.
    I have read about log files been dumped somewhere in a hidden 'Panther' folder. I've found them and I can find traces of the error message inside it. If someone could analyze it and find the roots of the issue.
      My ComputerSystem Spec


  4. Posts : 42
    Windows 10 Home (64-bit)
    Thread Starter
       06 Dec 2015 #4

    I've read that many people had issues with the update because of their antivirus software.
    I uninstalled Avira Antivirus, Malwarebytes anti-malware and CCleaner (which also seemed to cause issues with most people) and ran the upgrade again.
    Failed again.

    At the third stage, at 76%, it immediately jumped to 93% and immediately rebooted, giving me the "restoring your previous version" screen again...

    I really need help on this (and not clean install as a solution)

    Edit: side note, I'm actually wondering why this 1511 update is not even appearing in the Windows Update screen in the first place (always telling me I'm up-to-date, while I'm not) Could this be a root of the cause?

    Edit 2:

    These are the setuperr.log files from both installation attempts:

    First attempt (yesterday):
    Code:
    2015-12-05 11:07:22, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:07:24, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:07:33, Error                 MOUPG  CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1066): Result = 0xC1800104
    2015-12-05 11:07:33, Error                 MOUPG  CSetupManager::ExecuteInstallMode(724): Result = 0x800705BB
    2015-12-05 11:07:33, Error                 MOUPG  CSetupManager::ExecuteDownlevelMode(389): Result = 0x800705BB
    2015-12-05 11:07:34, Error                 MOUPG  CSetupManager::Execute(232): Result = 0x800705BB
    2015-12-05 11:07:34, Error                 MOUPG  CSetupHost::Execute(371): Result = 0x800705BB
    2015-12-05 11:12:02, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:12:03, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:12:03, Error                        CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
    2015-12-05 11:12:03, Error                        CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
    2015-12-05 11:12:05, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:12:05, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:12:21, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:13:03, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:13:05, Error                        CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
    2015-12-05 11:13:05, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session[gle=0x000000b7]
    2015-12-05 11:13:17, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:15:03, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:15:25, Error                        CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
    2015-12-05 11:15:39, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-05 11:15:43, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-05 11:15:45, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-05 11:15:45, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-05 11:15:45, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-05 11:15:45, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-05 11:17:19, Error                 CONX   Failed to get inf path SYSTEM\CurrentControlSet\Control\Network\{4d36e975-e325-11ce-bfc1-08002be10318}\{58474950-424f-0058-cfe8-aba2187557f2}
    
    2015-12-05 11:17:19, Error                 CONX   Failed to add net component 80070002
    
    2015-12-05 11:17:20, Error                 CONX   Failed to open inf key SYSTEM\CurrentControlSet\Control\Network\{6bdd1fc5-810f-11d0-bec7-08002be2092f}\{652def3d-35e7-4159-b8a0-084dcde0ea3e}
    
    2015-12-05 11:17:20, Error                 CONX   Failed to add net component 80070002
    
    2015-12-05 11:27:16, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2015-12-05 11:27:39, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2015-12-05 11:27:45, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
    2015-12-05 11:27:58, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
    2015-12-05 11:28:20, Error                 CSI    00000001 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #122350# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 6e006c002d004e004c000000 })
    [gle=0x80004005]
    2015-12-05 11:28:46, Error      [0x0808fe] MIG    Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
    2015-12-05 11:28:48, Error                 CSI    00000002 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #212475# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 6e006c002d004e004c000000 })
    [gle=0x80004005]
    2015-12-05 11:29:01, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2015-12-05 11:32:29, Error      [0x0808fe] MIG    Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490
    2015-12-05 11:32:31, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
    2015-12-05 11:32:34, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Root device 'ROOT\PRINTER\0001' does not have driver.
    2015-12-05 11:32:34, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Root device 'ROOT\PRINTER\0002' does not have driver.
    2015-12-05 11:33:17, Error                        CSetupAutomation::Resurrect: File not found: C:\$WINDOWS.~BT\Sources\Panther\automation.dat[gle=0x00000002]
    2015-12-05 11:33:17, Error                 SP     CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]
    2015-12-05 11:33:18, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2015-12-05 12:16:20, Error                 MIG    COnlineWinNTPlatform::AddPathToSearchIndexer - Failed to create CSearchManager instance, error: 0x80070422[gle=0x000003f0]
    2015-12-05 12:22:45, Error      [0x0808fe] MIG    Plugin {6CF7C0FC-91DD-4D47-9B6F-0769F8AE68D2}: [TpmScr] - check completion signature failed, skip this folder. file=C:\$WINDOWS.~BT\Work\MachineSpecific\Working\srcworking\agentmgr\CCSIAgent\005A9238\completed.txt
    2015-12-05 12:22:46, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: ParseRegistryIfBridgeExists: query bridge presence key failed 0x139f, bridge present = 0
    2015-12-05 12:22:47, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: DISPLAY\DEFAULT_MONITOR\1&8713BCA&0&UID0 -> Migrated [0000000000000000], configured [monitor.inf] and not present.
    2015-12-05 12:22:47, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0000 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493].
    2015-12-05 12:22:47, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0001 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493].
    2015-12-05 12:22:47, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0002 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493].
    2015-12-05 12:22:47, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0003 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493].
    2015-12-05 12:22:48, Error      [0x08038d] MIG    Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll", CLSID={43CCF250-2A74-48c6-9620-FC312EC475D6}, ThreadingModel=Apartment}. Error: 0x80070002
    2015-12-05 12:22:48, Error                 SP     Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$WINDOWS.~BT\Sources\ReplacementManifests,Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll,{43CCF250-2A74-48c6-9620-FC312EC475D6},Apartment. Will return 2[gle=0x000000cb]
    2015-12-05 12:30:43, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
    2015-12-05 12:31:01, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
    2015-12-05 12:31:20, Error                 MIG    Could not apply data unit for srcworkingalias\agentmgr\CCSIAgent\005AE70A\USER00000000\7040140-beautiful-landscape-sunset-wallpaper-hd.jpg: class Mig::SideAwareWin32Exception: Error creating destination file.: Het bestand bestaat. [0x00000050] void __cdecl Mig::CreateFileFromStream(const unsigned short *,class UnBCL::Stream *,struct ILocalProgress *,int)[gle=0x00000050]
    2015-12-05 12:31:20, Error                        WorkDir restore failed. Last error: 0x00000050[gle=0x00000050]
    2015-12-05 12:31:20, Error                 SP     pSPDoOnlineApply: Apply operation failed. Error: 0x0000002C[gle=0x00000050]
    2015-12-05 12:31:22, Error                 SP     Apply: Migration phase failed. Result: 44
    2015-12-05 12:31:23, Error                 SP     Operation failed: OOBE boot apply. Error: 0x8007002C[gle=0x000000b7]
    2015-12-05 12:31:23, Error                 SP     Operation execution failed: 13. hr = 0x8007002C[gle=0x000000b7]
    2015-12-05 12:31:23, Error                 SP     Operation execution failed.[gle=0x000000b7]
    2015-12-05 12:31:23, Error                 SP     CSetupPlatformPrivate::Execute: Failed to deserialize/execute pre-OOBEBoot operations. Error: 0x8007002C[gle=0x000000b7]


    Second attempt (today):
    Code:
    2015-12-06 10:07:02, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:07:03, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:07:04, Error                 MOUPG  CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1066): Result = 0xC1800104
    2015-12-06 10:07:04, Error                 MOUPG  CSetupManager::ExecuteInstallMode(724): Result = 0x800705BB
    2015-12-06 10:07:04, Error                 MOUPG  CSetupManager::ExecuteDownlevelMode(389): Result = 0x800705BB
    2015-12-06 10:07:04, Error                 MOUPG  CSetupManager::Execute(232): Result = 0x800705BB
    2015-12-06 10:07:04, Error                 MOUPG  CSetupHost::Execute(371): Result = 0x800705BB
    2015-12-06 10:10:15, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:10:15, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:10:17, Error                        CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
    2015-12-06 10:10:17, Error                        CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
    2015-12-06 10:10:18, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:10:18, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:10:38, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:10:56, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:10:58, Error                        CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
    2015-12-06 10:10:58, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session[gle=0x000000b7]
    2015-12-06 10:11:11, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:11:17, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:11:40, Error                        CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
    2015-12-06 10:11:59, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-12-06 10:12:01, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-06 10:12:02, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-06 10:12:02, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-06 10:12:02, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-06 10:12:02, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-06 10:13:21, Error                 CONX   Failed to get inf path SYSTEM\CurrentControlSet\Control\Network\{4d36e975-e325-11ce-bfc1-08002be10318}\{58474950-424f-0058-cfe8-aba2187557f2}
    
    2015-12-06 10:13:21, Error                 CONX   Failed to add net component 80070002
    
    2015-12-06 10:13:21, Error                 CONX   Failed to open inf key SYSTEM\CurrentControlSet\Control\Network\{6bdd1fc5-810f-11d0-bec7-08002be2092f}\{652def3d-35e7-4159-b8a0-084dcde0ea3e}
    
    2015-12-06 10:13:21, Error                 CONX   Failed to add net component 80070002
    
    2015-12-06 10:18:20, Error                 MOUPG  CDlpResponseImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IDlpResponse> > > >::CheckUserCancelled(1586): Result = 0x800704D3
    2015-12-06 10:18:20, Error                 MOUPG  CDlpResponseImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IDlpResponse> > > >::Execute(1751): Result = 0x800704D3
    2015-12-06 10:18:20, Error                 MOUPG  CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::ExecuteResponse(1184): Result = 0x800704D3
    2015-12-06 10:18:20, Error                 MOUPG  CDlpActionSummary::ExecuteRoutine(196): Result = 0x800704D3
    2015-12-06 10:18:20, Error                 MOUPG  CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Execute(441): Result = 0x800704D3
    2015-12-06 10:18:36, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-06 10:18:36, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-06 10:18:36, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-06 10:18:36, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-06 10:18:36, Error                 CONX   Failed to get class data from printer 80070057
    
    2015-12-06 10:19:11, Error                 CONX   Failed to get inf path SYSTEM\CurrentControlSet\Control\Network\{4d36e975-e325-11ce-bfc1-08002be10318}\{58474950-424f-0058-cfe8-aba2187557f2}
    
    2015-12-06 10:19:11, Error                 CONX   Failed to add net component 80070002
    
    2015-12-06 10:19:11, Error                 CONX   Failed to open inf key SYSTEM\CurrentControlSet\Control\Network\{6bdd1fc5-810f-11d0-bec7-08002be2092f}\{652def3d-35e7-4159-b8a0-084dcde0ea3e}
    
    2015-12-06 10:19:11, Error                 CONX   Failed to add net component 80070002
    
    2015-12-06 10:22:32, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2015-12-06 10:22:45, Error                 SP     pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
    2015-12-06 10:22:53, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2015-12-06 10:23:00, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
    2015-12-06 10:23:10, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
    2015-12-06 10:23:30, Error                 CSI    00000001 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #122350# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 6e006c002d004e004c000000 })
    [gle=0x80004005]
    2015-12-06 10:24:01, Error      [0x0808fe] MIG    Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
    2015-12-06 10:24:03, Error                 CSI    00000002 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #212475# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 6e006c002d004e004c000000 })
    [gle=0x80004005]
    2015-12-06 10:24:12, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2015-12-06 10:27:14, Error      [0x0808fe] MIG    Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490
    2015-12-06 10:27:14, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
    2015-12-06 10:27:18, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Root device 'ROOT\PRINTER\0001' does not have driver.
    2015-12-06 10:27:18, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Root device 'ROOT\PRINTER\0002' does not have driver.
    2015-12-06 10:28:00, Error                        CSetupAutomation::Resurrect: File not found: C:\$WINDOWS.~BT\Sources\Panther\automation.dat[gle=0x00000002]
    2015-12-06 10:28:00, Error                 SP     CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]
    2015-12-06 10:28:01, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2015-12-06 11:09:50, Error                 MIG    COnlineWinNTPlatform::AddPathToSearchIndexer - Failed to create CSearchManager instance, error: 0x80070422[gle=0x000003f0]
    2015-12-06 11:15:56, Error      [0x0808fe] MIG    Plugin {6CF7C0FC-91DD-4D47-9B6F-0769F8AE68D2}: [TpmScr] - check completion signature failed, skip this folder. file=C:\$WINDOWS.~BT\Work\MachineSpecific\Working\srcworking\agentmgr\CCSIAgent\005A9238\completed.txt
    2015-12-06 11:15:56, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: ParseRegistryIfBridgeExists: query bridge presence key failed 0x139f, bridge present = 0
    2015-12-06 11:15:58, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: DISPLAY\DEFAULT_MONITOR\1&8713BCA&0&UID0 -> Migrated [0000000000000000], configured [monitor.inf] and not present.
    2015-12-06 11:15:58, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0000 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493].
    2015-12-06 11:15:58, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0001 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493].
    2015-12-06 11:15:58, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0002 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493].
    2015-12-06 11:15:58, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0003 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493].
    2015-12-06 11:15:58, Error      [0x08038d] MIG    Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll", CLSID={43CCF250-2A74-48c6-9620-FC312EC475D6}, ThreadingModel=Apartment}. Error: 0x80070002
    2015-12-06 11:15:58, Error                 SP     Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$WINDOWS.~BT\Sources\ReplacementManifests,Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll,{43CCF250-2A74-48c6-9620-FC312EC475D6},Apartment. Will return 2[gle=0x000000cb]
    2015-12-06 11:23:14, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
    2015-12-06 11:23:31, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
    2015-12-06 11:23:53, Error                 MIG    Could not apply data unit for srcworkingalias\agentmgr\CCSIAgent\005AE70A\USER00000000\7040140-beautiful-landscape-sunset-wallpaper-hd.jpg: class Mig::SideAwareWin32Exception: Error creating destination file.: Het bestand bestaat. [0x00000050] void __cdecl Mig::CreateFileFromStream(const unsigned short *,class UnBCL::Stream *,struct ILocalProgress *,int)[gle=0x00000050]
    2015-12-06 11:23:53, Error                        WorkDir restore failed. Last error: 0x00000050[gle=0x00000050]
    2015-12-06 11:23:53, Error                 SP     pSPDoOnlineApply: Apply operation failed. Error: 0x0000002C[gle=0x00000050]
    2015-12-06 11:23:54, Error                 SP     Apply: Migration phase failed. Result: 44
    2015-12-06 11:23:55, Error                 SP     Operation failed: OOBE boot apply. Error: 0x8007002C[gle=0x000000b7]
    2015-12-06 11:23:55, Error                 SP     Operation execution failed: 13. hr = 0x8007002C[gle=0x000000b7]
    2015-12-06 11:23:55, Error                 SP     Operation execution failed.[gle=0x000000b7]
    2015-12-06 11:23:55, Error                 SP     CSetupPlatformPrivate::Execute: Failed to deserialize/execute pre-OOBEBoot operations. Error: 0x8007002C[gle=0x000000b7]
    Last edited by Sonar637; 06 Dec 2015 at 06:05.
      My ComputerSystem Spec


  5. Posts : 1,535
    Windows 10 Home x64 (Laptop), Windows 10 Pro x64 (Desktop)
       06 Dec 2015 #5

    I can't scroll right to see the full error details. Please post the error file with your message.

    Have you run sfc /scannow to check for any problems?
      My ComputerSystem Spec


  6. Posts : 42
    Windows 10 Home (64-bit)
    Thread Starter
       06 Dec 2015 #6

    Here you go.

    I've done the sfc as you requested, it found corrupt files which could not be fixed (strange, it isn't quite long ago, 3 months, since I've done an SFC at which it found no issues)
    CBS.log also contained within the attachements. (had to be zipped due to excess in file size)
    Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D Attached Files
      My ComputerSystem Spec


  7. Posts : 1,535
    Windows 10 Home x64 (Laptop), Windows 10 Pro x64 (Desktop)
       06 Dec 2015 #7

    If SFC /SCANNOW finds problems it can't fix, try running DISM /ONLINE /CLEANUP-IMAGE /RESTOREHEALTH from a command prompt. Then try SFC /SCANNOW again until it is clear (may to repeat several times). Restartr between each scan.

    Your error log shows lots of problems with printers - maybe that's a clue what's wrong? You could try uninstalling all printers & driver software, do the Windows 10 update, then reinstall them.

    Also see https://social.technet.microsoft.com...ion-of-windows which give a solution to the error "Migration phase failed. Result: 44" which you have.
      My ComputerSystem Spec


  8. Posts : 42
    Windows 10 Home (64-bit)
    Thread Starter
       06 Dec 2015 #8

    What does the DISM /ONLINE /... command actually do?
    I've just read that DISM has something to do with corrupt files prevent windows updates from installing... Perhaps also a reason why 1511 does not show up in Windows Update in the first place?

    Indeed, a lot of errors with printers. I have printer software from an HP Officejet Pro 8600 installed, never had any issue with it, until now maybe.
    I don't understand what you mean with "& driver software.." though, it redirected me to this page.
    Update Windows Drivers
    What other driver software do you mean?

    That post tells me to delete everything in the Softwaredistribution folder. I've done that this morning aswell, but it doesn't make 1511 appear in Windows Update genuinely, still had to do it via the Media Creation Tool.
      My ComputerSystem Spec


  9. Posts : 1,535
    Windows 10 Home x64 (Laptop), Windows 10 Pro x64 (Desktop)
       06 Dec 2015 #9

    Just Google DISM /ONLINE ... or search this forum and you will plenty of information. I've used the command several times to cure problems with Windows system files.

    The procedure for complete removal of printer driver software is:

    1. Turn on the printers you want to remove
    2. Run Device Manager
    3. Right click each printer and select uninstall
    4. Check the box "Delete the driver software for this device" then click OK


    This should remove the printer and all drivers. I would also select View / Show hidden devices in Device Manager and uninstall any hidden printers which may be causing problems.

    Incidentally, please ensure you have made a full system backup before you start modifying your system.
      My ComputerSystem Spec


  10. Posts : 42
    Windows 10 Home (64-bit)
    Thread Starter
       06 Dec 2015 #10

    I've tried the RestoreHealth command, it gave me an error, telling me it couldn't find the source files. (0x800f081f)
    (CheckHealth said there were no problems, ScanHealth said there were repairable problems... )

    About the printer: Is it also an option to just uninstall the Officejet 8600 components through the windows "uninstall a program" function? That also erases them out of device manager, I've found that out before.
      My ComputerSystem Spec


 
Page 1 of 3 123 LastLast

Related Threads
I've been unsuccessful in my attempts to recover from the November 2015 Windows 10 Upgrade. I was a child prodigy when it came to computers in the 60s and I was taking college Computer Science courses in high school. I have an engineering degree...
Windows10 10586 / 1511 upgrade fails on boot. in Windows Updates and Activation
Ok, I'm pretty sure I know what's going on, but I don't know which commands to run to fix. So, Windows 10 runs into issues during the reboot portion of the upgrade. I think it's that the windows boot manager believes it's in the first partition on...
So today the big Fall update came out and I wanted to install it so after over 2 hours of my slow internet downloading everything I need and installing it I was given a message that I need to restart my PC to finish everything up. So I did and while...
I have been trying to update to Windows 10 from Windows 8.1 Pro 64-bit via the media creating tool, using the ISO file, so far I've gotten the same error: "We couldn’t install Windows 10 - Error 0x8007002C–0x4000D. The Installation failed in the...
I am currently using Windows 10 Pro Insider Preview Build 10162. I am trying to update to Build 10240 using the Media Creation Tool. However, at 93% the update fails and reverts back to Build 10162 and displays this: 0x8007002C - 0x4000D The...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:15.
Find Us