1.    29 Nov 2015 #1
    Join Date : Nov 2015
    Posts : 5
    Windows 10 Pro

    Windows to go boot issues


    Hi

    I have issues with a windows to go installation. The installation is windows 8.1
    and it works perfectly on the computer where the installation was created. But
    I am not able to boot it on any other computer, regardless of OS. I have tried
    on many other computers with different OS but no luck. I tried to activate wintogo
    boot in Windows and alter bios settings.

    The other computers just skips the connected wintogo certified disk and does not
    present a option to boot from it. On the working computer I can choose between
    win10 and win 8.1 - the win to go install - it is presented even if the wintogo is not
    connected at all.

    For me this appears like a "boot configuration error" on the wintogo disk but I am not
    Sure. What can I do to make the wintogo boot on other computers?

    Thank you kindly for the assistance
      My ComputerSystem Spec
  2.    29 Nov 2015 #2
    Join Date : Oct 2015
    Posts : 2,114
    Windows 10 Pro X64

    Hi,

    What did you use to create the Win to Go drive?

    Cheers,
      My ComputersSystem Spec
  3.    30 Nov 2015 #3
    Join Date : Nov 2015
    Posts : 5
    Windows 10 Pro
    Thread Starter

    1. Navigate to \sources and copy the install.wim file to your desktop or other convenient location
    2. Insert your USB or HDD and format the partition as NTFS with the default allocation
    3. Download the free GImageX (http://www.softpedia...s/GImageX.shtml) and extract it
    4. Run the x86 or x64 version depending on the version of Windows you are using
    5. Navigate to the "Apply" tab
    6. In the source section enter or browse for the location of the install.wim we copied earlier
    7. In the destination section enter or browse for the location of the device you want to use for Windows to Go
    8. Leave the checkboxes unchecked and hit apply
    9. After imaging process is complete navigate to Disk Management (type in partition at search and you will find it)
    10. Find the partition you are using for Windows to Go and right click it then -> "Mark partition as active" - this will allow us to boot from this partition, if its already active then don't worry about this step
    11. Navigate to your Windows to Go disk and go to \Windows\System32
    12. Open up CMD from this location (or change directory to the above folder) and enter bcdboot.exe X:\Windows /s X: /f ALL


    It was kind of tricky, had to tried many times :-)

    Cheers
      My ComputerSystem Spec
  4.    30 Nov 2015 #4
    Join Date : Jun 2015
    Posts : 1,929
    Windows 3.1 to Windows 10

    Because when the drive was created the boot files where placed on that Host system
    you need to create the BCD on the USB

    (assuming a 1 partition USB drive)

    bcdboot X:\Windows /s X: /f ALL

    X = the window to go USB drive letter
      My ComputerSystem Spec
  5.    30 Nov 2015 #5
    Join Date : Nov 2015
    Posts : 6
    windows 10

    It's easy to miss some steps when creating the windows to go drive manually. I suggest you using the freeware ISO2Disc or Rufus. Both of them support creating windows to go usb directly from Windows 8 ISO file.
      My ComputerSystem Spec
  6.    03 Dec 2015 #6
    Join Date : Nov 2015
    Posts : 5
    Windows 10 Pro
    Thread Starter

    I got the following error when trying the bcdboot command

    C:\windows\system32>bcdboot C:\windows /s C: /f ALL
    Failure when attempting to copy boot files.
      My ComputerSystem Spec
  7.    03 Dec 2015 #7
    Join Date : Jun 2015
    Posts : 1,929
    Windows 3.1 to Windows 10

    Is C:\ the drive letter assigned to the windows to go usb ??
      My ComputerSystem Spec
  8.    03 Dec 2015 #8
    Join Date : Nov 2015
    Posts : 5
    Windows 10 Pro
    Thread Starter

    Yes! I tried this command from the WIN to go drive
      My ComputerSystem Spec
  9.    03 Dec 2015 #9
    Join Date : Jun 2015
    Posts : 1,929
    Windows 3.1 to Windows 10
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Locked SSD and boot issues
So my computer froze and I restarted it. and I ran into a bunch of boot issues. In all Scenarios, all fans,case lighting, GPU lights turn on and stay on. -When I reset the PC, it goes to the bios screen and my motherboard Dr. Debug shows A9 (...
General Support
Solved W10 shutdown/sleep/re-boot issues
Howdy all, I recently loaded W10 onto my computer. I completed a clean install. My computer is a HP-580t, I7, running a ssd hard drive. Motherboard is from Pegatron Corporation - IPMTB-TK. Legacy bios. Issues: When I shut down the computer, no...
General Support
Solved Issues on boot up
Hi, I have a old Lenovo SL500 that I use as a cheap media box. I've got Windows 10 installed on it and it has been running great up until this morning. When I came down it was not responding to RDP requests and it was not listed on Teamviewer....
General Support
Secure boot issues
Hi, I am using an acer travelmate laptop and I'm attempting to boot from an official (I think) windows 10 DVD, I downloaded it using the media creation tool (as a dual x64-x86 iso) and created a bootable iso from the x64 portion (with imgburn) the...
Installation and Upgrade
Boot up issues
Since updating to windows 10 I have to boot up twice. When i first boot up the computer switches itself off after about 10 secs. I switch it back on again and it usually boots into windows fine. This happens every time I boot up and is annoying more...
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 03:30.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums