Windows 10: Make 32-bit DVD of 32/64 bit ISO?

Page 1 of 2 12 LastLast
  1.    26 Nov 2015 #1

    Make 32-bit DVD of 32/64 bit ISO?


    I just downloaded the 32/64 bit ISO using the "Both" option of MCT; now I discover that it won't fit on a DVD (ISO file is 5.47GB).

    One of my older PCs won't boot from the USB drive, so I need a DVD. Do I have to download the 32-bit version? I've started just in case, but not a very fast internet connection out here in the boonies.

    http://www.microsoft.com/en-us/softw...load/windows10
      My ComputerSystem Spec


  2. Posts : 2,238
    Windows 10 Pro 64-bit 1607 (AE build 14393.1198)
       26 Nov 2015 #2

    I don't know of a way to separate the versions from the image. I would rather download the 32-bit version from Microsoft Tech Bench. This ISO can install or upgrade both Home and Pro version depending on previous Windows version or key (for clean-install). Careful to download the right language, or you won't be able to upgrade. "English" is English US and "English International" is English GB (British). Each language can only upgrade the same language. Unless you have a specific restricted Windows version, you need to download the first option "Windows 10" which is the full unrestricted version containing both Home and Pro.
      My ComputerSystem Spec

  3.    26 Nov 2015 #3

    It's 50% downloaded now, so I may as well wait. However, I have a bigger problem, the DVD drive is broken

    Is there a way to do a clean install from a USB stick if the PC won't boot from it?
      My ComputerSystem Spec


  4. Posts : 2,238
    Windows 10 Pro 64-bit 1607 (AE build 14393.1198)
       26 Nov 2015 #4

    If you have a working computer at the same network, same workgroup and network set as "private" (not public), then you can share your DVD-ROM drive. Open network from the other computer and then access the DVD-ROM drive. Don't start setup from there, it could be unable to continue at some point! Instead copy all the files to a folder in the hard disk (such as C:\W10SETUP) and then run setup from this folder to upgrade your existing Windows version to 10.

    For a clean-install on the same computer you would have to swap the DVD-ROM drive with a working one or use a USB DVD-ROM drive, if available. There is another option, use a utility to extract Windows setup files to the hard disk (connect the disk to a another computer to use its DVD drive) and then boot from the hard disk to resume setup, but this is too advanced and I wouldn't want to confuse you.
      My ComputerSystem Spec

  5.    26 Nov 2015 #5

    If you can boot into recovery then (assuming your disk is already partitioned) you could go to command line and from powershell enter
    Code:
    Expand-WindowsImage -ImagePath "e:\sources\install.wim" -ApplyPath "c:\" -Index 1
    Expand-WindowsImage

    I did this recently from a dual boot of windows and no other steps were required (I use a third party bootloader).

    If it doesn't boot you might have to run bcdboot c:\Windows afterwards though.
      My ComputerSystem Spec

  6.    26 Nov 2015 #6

    Buggerit! Tried to run from Windows 7 but I can't install it anyway, CPU doesn't support MX
      My ComputerSystem Spec


  7. Posts : 2,238
    Windows 10 Pro 64-bit 1607 (AE build 14393.1198)
       26 Nov 2015 #7

    Can't be! You have a Core-i5. Maybe you have to enable NX/PAE/DEP (whatever is called) in BIOS. If unsure, just enable all CPU features in Advanced section to be on the safe side. Just in case CPU is not detected properly, you may also try updating your chipset drivers. In worst case you may have to update your BIOS to the last version.
      My ComputerSystem Spec

  8.    26 Nov 2015 #8

    Clean Install on Old PC with no DVD Drive or USB Boot?


    I've got several problems with this very old Dell Inspiron I8200 PC (NOT the PC in my specs):
    • It has no working DVD Drive
    • It doesn't support boot from USB
    • Trying to install 10586 from a USB in Windows 7 said "This PC's processor doesn't support a critical feature (NX).


    Should I give up?
    Last edited by Brink; 26 Nov 2015 at 09:11. Reason: moved to original thread
      My ComputerSystem Spec

  9.    26 Nov 2015 #9

    This is a different PC, as I said: "One of my older PCs ..."

    New thread started with relevant subject: https://www.tenforums.com/installatio...tml#post480983
      My ComputerSystem Spec

  10.    26 Nov 2015 #10

    You could download the ISO to the PC and update it after you either mount it or unzip it. If that still results in the same processor error then I would just use the existing OS.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Solved How to make 4 in 1 installation USB? in Installation and Upgrade
I created the 64bit & 32bit Windows 10 Pro installation USB using the create USB option of Media Creation Tool. Does anyone know how to add 64bit & 32bit Windows 10 Home to the same USB so that the Setup program asks me which one of the 4 versions...
Help me make a choice here... in General Support
I've read and heard more and more about Windows 10's streaming capabilities with the Xbone, and it sounds amazing. I read in an interview that Microsoft is looking into supporting the streaming feature across different networks, which is huge....
Hi, I had a vision correction surgery two weeks ago and it'll be about two months until my vision is sharp enough for small text. Until then, I'd like to make everything look bigger on my Windows 10 computer. It's easy to zoom in the browsers,...
So far I only received a restore point for when I installed a LAN driver and when I make them manually. Why can't it create more like it used to?
Make 10 look like XP? in Customization
Anybody find anything to make 10 look like XP?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:07.
Find Us