1.    18 Nov 2015 #1
    Join Date : Jul 2015
    Posts : 88
    Windows 10 x64

    Pentium e5200 cpu not supported?


    I have a PC here (not mine) that has win7 32 bits, 4gb ram and pentuim e5200 (45 nm) that has the disable bit enabled in bios and the latest update kbxx2664 istana but still have the "CPU not supported" message when clicking the windows upgrade icon in the tray.

    Any idea what is happening? Should I try to install with the media creation tool?
      My ComputerSystem Spec
  2.    18 Nov 2015 #2
    Join Date : Jul 2015
    Posts : 88
    Windows 10 x64
    Thread Starter

    Ran Windows 8.1 Upgrade assistants, it says NX not supported.

    Ran CoreInfo, it is there !!

    Coreinfo v3.31 - Dump information on system CPU and memory topology
    Copyright (C) 2008-2014 Mark Russinovich
    Sysinternals - Windows Sysinternals: Documentation, downloads and additional resources

    Pentium(R) Dual-Core CPU E5200 @ 2.50GHz
    x86 Family 6 Model 23 Stepping 10, GenuineIntel
    Microcode signature: 00000A0B
    HTT * Hyperthreading enabled
    HYPERVISOR - Hypervisor is present
    VMX - Supports Intel hardware-assisted virtualization
    SVM - Supports AMD hardware-assisted virtualization
    X64 * Supports 64-bit mode

    SMX - Supports Intel trusted execution
    SKINIT - Supports AMD SKINIT

    NX * Supports no-execute page protection
      My ComputerSystem Spec
  3.    18 Nov 2015 #3
    Join Date : Jul 2015
    Posts : 88
    Windows 10 x64
    Thread Starter

    Must be a bug
      My ComputerSystem Spec
  4.    18 Nov 2015 #4
    Join Date : Sep 2015
    Posts : 2,370
    Windows 10 Pro 64-bit 1706 (CU build 15063.674)

    According to your Intel E5200 CPU Specifications, the NX bit IS supported, but not the Trusted Execution Technology. However, I don't think the latter is a requirement to install Windows 10. Forget about Windows Update, just download the official Windows 10 ISO from Microsoft Tech Bench and use it to upgrade. The full version is "Windows 10" and can upgrade to Home or Pro depending on previous Windows version. Others are restricted and can upgrade only the respective restricted Windows 7 or 8 versions.

    English language warning: "English" is English US, while "English International" is English GB. Be careful to download the right language, or you won't be able to upgrade!

    After you download the ISO, mount it on a virtual drive (in Windows 8 right-click and select Open with Windows Explorer), or burn to DVD to run setup. Just in case, right-click on setup and Run as Administrator.

    PS: Make sure NX is enabled in BIOS. Some BIOS have default to disabled.
      My ComputerSystem Spec
  5.    18 Nov 2015 #5
    Join Date : May 2015
    Posts : 1,647
    Win 10 X64 Pro 15063

    The Pentium E5200 is supposed to support all of the necessary instructions, including the more obscure ones like CMPXCHG16b.

    Maybe you'd do OK following the advice is post #4.

    I'd advise against upgrading a PC that old to 7, except I've already done that to a laptop from 2008 with an AMD QL 60 CPU and an nVidia motherboard chipset, no less. Hasn't rejuvenated it, but it runs no slower than it did under Win 7. (It was originally sold with Vista.)
      My ComputerSystem Spec
  6.    18 Nov 2015 #6
    Join Date : Sep 2015
    Posts : 2,370
    Windows 10 Pro 64-bit 1706 (CU build 15063.674)

    I have also upgraded a couple of Vista PCs to 10 without issues. One of them is using Vista only drivers because it is very old, but it works! Go ahead!
      My ComputerSystem Spec
  7.    18 Nov 2015 #7
    Join Date : Jul 2015
    Posts : 88
    Windows 10 x64
    Thread Starter

    Will do once I clear up some space
      My ComputerSystem Spec
  8.    19 Nov 2015 #8
    Join Date : Jul 2015
    Posts : 88
    Windows 10 x64
    Thread Starter

    Ok just ran the installer from the USB key made with the media creation tool.

    STILL SAYS NX ISN'T SUPPORTED!! That's annoying. Can't perform the upgrade from Windows 7. So, can I do the upgrade by booting from the USB key?
      My ComputerSystem Spec
  9.    19 Nov 2015 #9
    Join Date : Jul 2015
    Posts : 88
    Windows 10 x64
    Thread Starter

    SOLVED!

    bcdedit /set nx alwayson
      My ComputerSystem Spec
  10.    20 Nov 2015 #10
    Join Date : Sep 2015
    Posts : 2,370
    Windows 10 Pro 64-bit 1706 (CU build 15063.674)

    Good news!
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Solved Windows 10 will not install on a system with a Pentium G3258 CPU
Hi all, As I posted in the SevenForums two months ago, Microsoft released an update (specifically KB3064209) in June (2015) for Windows 7 that effectively caused a system with an Intel Pentium G3258 processor to not boot after the update was...
Installation and Upgrade
Can the Intel Pentium Dual-Core CPU 6300 Support ten?
So I have a old Computer that has a Intel Pentium Dual-Core 6300 and want to upgrade it to Ten so if I have to use it I will be use to it. Can it upgrade?
Drivers and Hardware
CPU Not Supported for windows 10 ?!
27449 27450
Drivers and Hardware
Solved CPU Not Supported
Have Windows 7 sp1 and Windows 10 Build 10240 in dual boot. On trying to upgrade windows 7, error message: Your CPU is not supported. Have Intel Core2duo E7500 @ 2.93 ghz. Coreinfo utility says all NX, PAE & SSE2 are supported and enabled. Window...
Drivers and Hardware
Solved How to enable the NX feature on a Pentium Dual Core CPU E5700@3.00Ghz?
My install to Windows 10 failed on a PC running 32bit Windows 7 Home Premium. The error I got was that the NX feature was not enabled on the CPU. How may I enable the NX feature?
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:49.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums