1.    07 Nov 2015 #1
    Join Date : Nov 2015
    Posts : 3
    Win7

    Error code 0xC1900101-Ox30018


    Upgrade to Win 10 failed three times showing the above error codes.

    Sony VAIO Laptop previously with Vista then I upgraded to Win 7 Ultimate. I have followed a suggested fix see below but alas it did not help, any ideas or do I give up?

    - Try installing the update again, do the following before:

    1. Open a Command Prompt (Run as Administrator)

    2. Type: cd %windir% and press the Enter key.

    3. Type: net stop wuauserv and press the Enter key

    4. Type: ren softwaredistribution softwaredistribution.old and press the Enter key.

    5. [ Note: if you get an error message, ignore and type the above again and press Enter ]

    6. Type: net start wuauserv and press the Enter key.

    7. Type: Exit and press Enter, then go back and check for Windows Updates again.

    When the download reaches 100%, disconnect from the Internet immediately if you are connected by Ethernet or Wireless.
      My ComputerSystem Spec
  2.    07 Nov 2015 #2
    Join Date : Oct 2014
    Posts : 4
    Win8.1

    I had a similar error see attached picture:
    0xC1900191 - 0x30015 installation failed FIRST_BOOT phase error SYSPREP

    on 2 computer when I tried to upgrade from b240 to an iso I made from the b586 esd

    When I removed the Audigy card from the one computer and removed the metered connection wi-fi restriction the upgrade completed
    Click image for larger version. 

Name:	0xC1900191 - 0x30015 installation failed .jpg 
Views:	21 
Size:	31.5 KB 
ID:	46788
      My ComputerSystem Spec
  3.    08 Nov 2015 #3
    Join Date : Nov 2015
    Posts : 3
    Win7
    Thread Starter

    Thanks for this but I do not understand the terms ISO, b240 and b586esd can you explain please to help me out.

    I did disconnect the Lap-top from the Internet after it had downloaded the OS from the M/Soft site but again it failed to install in fact I tried three times the first time as a straight install with the software/apps and documents intact the second time without the apps and the third time a 'clean install' with no apps and no documents etc.

    I have also installed 10 successfully on my desktop PC without disconnecting from the internet and again on my netbook without any problems.
      My ComputerSystem Spec
  4.    08 Nov 2015 #4
    Join Date : Oct 2014
    Posts : 4
    Win8.1

    I used the build 586 (th2) electronic delivery esd to make an install ISO and tried to upgrade my Windows 10 (build 240) with that.
    I was only successful once I removed the metered connection restriction on my Wi-Fi Internet connection AND removed my Creative labs Audigy sound card. I do not know which of the 2 was the solution.

    I do have believe that if MS delivers the TH2 upgrade in the form of a cumulative upgrade instead of an esd the upgrade may be better because I assume no driver changes will then occur.
      My ComputerSystem Spec
  5.    09 Nov 2015 #5
    Join Date : Nov 2015
    Posts : 3
    Win7
    Thread Starter

    Well that is the fifth time of trying and the same thing happens again looks as if MS and its much vaunted Win Ten is not for me and to have to chuck away a perfectly good laptop which cost when new 850 is a tragedy.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Solved 0xC1900101 - 0x2000A - Error
"The Installation failed in the SAFE_OS phase with an error during PREPARE_FIRST_BOOT operation" Hi, Above is my error with my windows 10 upgrade. It downloads and then starts copying the files on the black screen with the big % sign, but then...
Installation and Upgrade
Solved Windows 10 Error code 0xc1900101-0x30018
Upgrading a Windows 8.1 installation and it stuck at getting devices ready at 2%. No BSOD. Has to be specific to 8.1 as I have already installed 10 on a clean partition with no issues on this machine. All drivers up to date. Did try removing Avast....
Installation and Upgrade
Error code 0xc1900101 - 0x40017 automatic repair loop
My computer is stuck in this automatic repair loop. tells me to restart my computer to fix it, but it is still broken after i restart
General Support
Upgrade Windows7Pro to Windows10Pro fails code 0xC1900101-0x3000D
Failure occurs when reporting approximately 50% of installation. Message is"The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation."
Installation and Upgrade
Win 10 Error code 0xc1900101-0x20017 SAFE_OS During Boot
I'm using the MediaCreationToolx64 and received the error message shown in the title as the actual installation started. That is, after all the checking for updates etc. The system was returned to its original Win 8.1 state. Does the error code or...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:37.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums