Windows 10: Trouble with W7 Pro to W10 upgrade

Page 1 of 2 12 LastLast
  1.    14 Oct 2015 #1

    Trouble with W7 Pro to W10 upgrade


    I'm trying to do an upgrade, but it keeps on stopping on this error: 0xC1900101-0x4000D. Can someone point me to a solution?
      My ComputerSystem Spec


  2. Posts : 3,034
    Windows 10 Pro 64 bit
       14 Oct 2015 #2

    saline said: View Post
    I'm trying to do an upgrade, but it keeps on stopping on this error: 0xC1900101-0x4000D. Can someone point me to a solution?
    Any other message along with this code ? How are you doing the upgrade, from downloaded files on PC, made a disc or USB Flash drive?
      My ComputerSystem Spec

  3.    14 Oct 2015 #3

    This is the only error. It goes for several hours before I get the message, but it comes back and says that it has restored the previous OS after trying to restart twice. That's really the only error message it gives.

    I'm upgrading from Windows 10 and using the 64-bit download tool directly onto the PC. No media is made.
      My ComputerSystem Spec


  4. Posts : 3,034
    Windows 10 Pro 64 bit
       14 Oct 2015 #4

    saline said: View Post
    This is the only error. It goes for several hours before I get the message, but it comes back and says that it has restored the previous OS after trying to restart twice. That's really the only error message it gives.

    I'm upgrading from Windows 10 and using the 64-bit download tool directly onto the PC. No media is made.
    Look through this tutorial from here from beginning in case there is something you are not doing correctly, make sure to remove any Anti-Virus software first. https://www.tenforums.com/tutorials/2...tallation.html
      My ComputerSystem Spec


  5. Posts : 3,034
    Windows 10 Pro 64 bit
       14 Oct 2015 #5

    Could also try the ISO make a disc instead this way https://www.tenforums.com/tutorials/9...-download.html
      My ComputerSystem Spec

  6.    14 Oct 2015 #6

    jds63 said: View Post
    Look through this tutorial from here from beginning in case there is something you are not doing correctly, make sure to remove any Anti-Virus software first. https://www.tenforums.com/tutorials/2...tallation.html
    I upgraded another system without removing AVG that's why I tried this the same way. I went back in and removed it and tried again. same error. I'm attaching the error screen.
    Attached Thumbnails Attached Thumbnails W10 error.jpg  
      My ComputerSystem Spec


  7. Posts : 9,031
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       14 Oct 2015 #7

    I take it you are restored back to Windows 7 now. Try this, open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
      My ComputersSystem Spec

  8.    15 Oct 2015 #8

    looks like no integrity violations.
    Click image for larger version. 

Name:	scannow.jpg 
Views:	1 
Size:	50.3 KB 
ID:	42931
      My ComputerSystem Spec


  9. Posts : 3,034
    Windows 10 Pro 64 bit
       15 Oct 2015 #9

    Try this command at same Admin Command Prompt after SFC
    Dism /Online /Cleanup-Image /RestoreHealth

    Some i found about this error what to try as said before try the Windows 10 ISO instead to do the upgrade.

    0xC1900101-0x4000D - The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation


    Disable (preferrably uninstall) your Antivirus utility before attempting the upgrade.
    Disable General USB Devices .
    Do a clean boot and try again.
    If you are upgrading using the .ISO file, disconnect from the Internet during setup, if you are connected by LAN (Ethernet) or Wi-Fi, disable both and attempt setup again.
    If you are updating through Windows Update, when the download reaches 100% disconnect from the Internet LAN (Ethernet) or Wi-Fi and proceed with the installation.
    If that does not work, try using the .ISO file to upgrade if possible.
    If you are connected to a domain, switch to a local account
    If you have any external devices attached to the machine, disconnect them (example, USB keys, external hard disk, printers, non-essential devices).
      My ComputerSystem Spec

  10.    15 Oct 2015 #10

    jds63 said: View Post
    Try this command at same Admin Command Prompt after SFC
    Dism /Online /Cleanup-Image /RestoreHealth

    Some i found about this error what to try as said before try the Windows 10 ISO instead to do the upgrade.

    0xC1900101-0x4000D - The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation


    Disable (preferably uninstall) your Antivirus utility before attempting the upgrade.
    Disable General USB Devices .
    Do a clean boot and try again.
    If you are upgrading using the .ISO file, disconnect from the Internet during setup, if you are connected by LAN (Ethernet) or Wi-Fi, disable both and attempt setup again.
    If you are updating through Windows Update, when the download reaches 100% disconnect from the Internet LAN (Ethernet) or Wi-Fi and proceed with the installation.
    If that does not work, try using the .ISO file to upgrade if possible.
    If you are connected to a domain, switch to a local account
    If you have any external devices attached to the machine, disconnect them (example, USB keys, external hard disk, printers, non-essential devices).

    I'm going to try the ISO route next, but I tried the SFC command you described, but I must have the syntax incorrect. I also tried with just one argument and got a similar response.
    Attached Thumbnails Attached Thumbnails scannow.jpg  
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Solved Trouble with new keyboard in Drivers and Hardware
Hi folks, I was given a CM Storm Devastator gaming keyboard and mouse for Christmas. I plugged everything in and my mouse lighted up right away. however, in order to turn the keyboard lights on I have to press SCR LK. The problem is that...
I'm Having Trouble... in Windows Updates and Activation
Installing this update... Cumulative Update for Windows 10 (KB3097617) - Error 0x80004005 Thanks in advance!
Hello Recently upgraded to w10 from w8.1 via the upgrade option, then proceeded to make a USB boot with w10 and performed a clean install. However, something is fishy with my system and w10 so for now i want to revert back to w8.1 via a clean...
Solved Trouble installing 10 in Installation and Upgrade
Trying to install 10 preview build 9926 as a dual boot with Win 7. I have a separate blank hard drive for the Win 10. Using a DVD with the ISO burned on it. When I try to install after getting into "custom install" it states I can't install because...
Solved Trouble with VMware in Virtualization
I have the latest build of 10 installed in the free version of VMware and everything seemed to be working OK. When I've finished usually I'll either power off or suspend the VM, never had problems. The last time I powered off was a couple of...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:39.
Find Us