1.    06 Oct 2015 #1
    Join Date : Oct 2015
    Posts : 5
    win10

    How can i recover lost partition and data in it


    I was running win 7 with 4 partitions , thought to upgrade to win 10. While installing it didn't allowed me to install. I thought i can run diskpart clean on one partition, selected one volume and ran clean command, but it still cleaned all the partitions. Long story short, I cannot boot my OS until I install OS on freshly created single partition. I was told to use partition recovery apps like partition and mount software, Do I have to install OS on it anyways and once OS is installed, instal the partition and mount software for the recovery?
      My ComputerSystem Spec
  2.    06 Oct 2015 #2
    Join Date : Jul 2015
    Posts : 9,149
    Windows 10 Pro

    NO! Don't do anything that involves the hard drive at this point. You will need to use another computer to create a disk recovery boot disk from a recovery program and use that to boot the computer with the affected hard drive and then let the program do its thing.

    This is the program I have used in the past, and I think Brink recommends it too:
    Active@ Partition Recovery restores deleted damaged volumes &amp disks. Freeware Data Recovery Software Toolkit

    You can try this one for free, the company is a pretty good company, but I haven't used this software:
    Free Partition Recovery Software - EaseUS Partition Recovery.
      My ComputerSystem Spec
  3.    06 Oct 2015 #3
    Join Date : Sep 2015
    Posts : 2,312
    Windows 10 Pro 64-bit 1706 (CU build 15063.674)

    Bad news is that you cannot recover your Windows system and applications. You also need another computer for the recovery. Good news is that you can save all your data (documents, photos etc). Remove the disk from your computer and connect it to the other computer either directly or via a USB adaptor. Use a recovery utility such as those mentioned by NavyLCDR. I use GetDataBack. This will scan your disk for data, it will take long. The larger the disk the longer it will take, as it scans sector-by-sector. When data are found you can copy to another disk. NOT TO THE SAME DISK! After you have copied all your data, install your previous Windows version, activate it and update to Windows 10. You will also have to reinstall all applications and then copy back your data from the other disk.

    You have learned the hard way that you never mess with disk utilities if you don't know exactly what you are doing. I remember back in the 90's when most computers had MS-DOS. I was executing the help command to see all the available commands. Then I tried them to see what they do. Unfortunately I also tried the format command and wiped my startup disk! Thankfully, when I went back to the store and explained what happened they replaced it. They had seen that many times. Now I'm wiser, I never try utilities that have to do with disks, unless I know exactly what I am doing!
      My ComputerSystem Spec
  4.    06 Oct 2015 #4
    Join Date : Jul 2015
    Posts : 9,149
    Windows 10 Pro

    Quote Originally Posted by spapakons View Post
    Bad news is that you cannot recover your Windows system and applications.
    Why not? If only the partition was deleted and nothing was overwritten the recovery software will just redefine the partitions in the partition table and everything should come back - if the file allocation table wasn't messed up.
      My ComputerSystem Spec
  5.    07 Oct 2015 #5
    Join Date : Sep 2015
    Posts : 2,312
    Windows 10 Pro 64-bit 1706 (CU build 15063.674)

    It depends on the recovery tool. If the tool tries to repair the partition table, then this would work and make the Windows installation usable again. Other tools attempt to read data from an accidentally formatted or damaged disk. In that case they allow copying the data to another disk for obvious reasons, they don't try to fix the source disk. Unfortunately, even if you copy all the files of an application in the Program Files folder to another folder, the application wont work because it wouldn't find the necessary entries in the registry. You must reinstall it. So you cannot use these tools to save the Windows installation and applications, you can only save your data (documents, photos, music, video). If I had both tools, I would first try to fix the partition table. If could not, I would then use the other tool to backup all data before formatting the disk for a clean install.
      My ComputerSystem Spec
  6.    14 Oct 2015 #6
    Join Date : Oct 2015
    Posts : 5
    win10
    Thread Starter

    Thanks to everyone that replied to this post. I eventually gave up on it after i foolishly damaged the new sata disk connector cord i bought, i couldnt afford another right now so i gave up and installed new win7 o.s (i now have no hope of recovering my files back ). However, i reffered a frnd of mine facing the same issue since 5 weeks ago (apparently had much patience than me) to this page and he claimed he got it solved with navyLCDR's reply and some degree of help fron spapakons'. Thanks once again to y'all..
      My ComputerSystem Spec
  7.    14 Oct 2015 #7
    Join Date : Feb 2014
    Scottsdale, AZ USA, 85254
    Posts : 315
    windows 10

    Quote Originally Posted by NavyLCDR View Post
    NO! Don't do anything that involves the hard drive at this point. You will need to use another computer to create a disk recovery boot disk from a recovery program and use that to boot the computer with the affected hard drive and then let the program do its thing.

    This is the program I have used in the past, and I think Brink recommends it too:
    Active@ Partition Recovery restores deleted damaged volumes &amp disks. Freeware Data Recovery Software Toolkit

    You can try this one for free, the company is a pretty good company, but I haven't used this software:
    Free Partition Recovery Software - EaseUS Partition Recovery.
    thanks for posting these links! i was looking for info like this as well as I have a damaged hard drive with data on it and before i send it back to western digital i want to see if i can possibly retrieve anything at all off of it. however the link to the first one you posted they want you to buy it and it doesn't look like there is a free version. or is there?
      My ComputerSystem Spec
  8.    02 Feb 2016 #8
    Join Date : Feb 2016
    Posts : 1
    windows 7

    Yes, Spapakons is right! Connect your hard drive as an external drive to another system and then utilize recovery application for recovering data from lost partition (Note: do not install the tool or any data in your hard drive as it may overwrite the data from lost partition). This recovery tool will be helpful in recovering lost partition in an easier way. http://kindro.com/software-for-parti...-in-windows-10
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Is a 100mb system partition required on my data disk?
I originally started with a HDD with windows installed on it and data in anther partition on the drive, then got a SSD and moved the windows partition onto it, my drives and partitions look like this: 34362 I'm not sure if to remove the old...
Drivers and Hardware
Perform a clean install on a disk that has a data partition?
I've been considering shrinking my one disk (disk 0) to create another volume, a data partition, but I'm still not clear what happens in the event that I want to refresh, reset or clean install Windows 10 in the future. Would the data partition...
Installation and Upgrade
Build 10158 - loses Office 2016 Preview (no data lost though)
Hi there I needed to re-install Office 2016 Preview again after updating to build 10158. - Didn't lose any data (Outlook 2016 for example uses same data files as Office 2010 which remains installed). Not a serious issue - but could flummix a...
Software and Apps
Data on separate partition or drive?
Wondering how Windows 10 deals with putting data on a separate partition or drive. Does it use the same general method as in Windows 7, where it re-maps (for example) "Documents" to a folder on a different letter drive path? So that...
Installation and Upgrade
Solved Virtual hard drive made with partition wizard lost after win10 install
As per title, i have this annoying issue. Having a 3TB hard drive in win7, after partitioning normally the first 2GB of it, i opted to use partition wizard to partition the remaining 1GB of the drive. It did so, i assume, by creating a permanent...
Virtualization
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:28.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums