Windows 10: Acronis True Image to restore after W10 install??

Page 2 of 4 FirstFirst 1234 LastLast
  1.    15 Oct 2014 #11

    OK, things did NOT go as well as I had thought... ;(

    Machine did boot up just fine, but I still had the USB stick created by Acronis TI 2014 inserted.

    this morning I got some updates needing a reboot and I had removed the stick, no boot device found.

    checked Disk Management and all partitions marked as simple and no way to change that I know of. And if I put the stick back in and try to boot to the Acronis boot and software, it instead just boots into W8.1.

    Now I'm stuck and don't know what to do to get it back to booting from the HD. Any thoughts???
      My ComputerSystem Spec

  2.    15 Oct 2014 #12

    You have to change the boot order back to what it was before.
    I think it should be DVD 1st, HDD 2nd.
      My ComputersSystem Spec


  3. Posts : 4,333
    Win 10 Pro x64
       15 Oct 2014 #13

    Do you have any hardware upgrade or attached peripheral on your hp 23-n010 other than what it originally came with? Because that may be causing the installation problem. You may want to pull them out first and then try the installation again.
      My ComputerSystem Spec

  4.    15 Oct 2014 #14

    COMPUTIAC said: View Post
    You have to change the boot order back to what it was before.
    I think it should be DVD 1st, HDD 2nd.
    I'll look at that after I do the re-restore. I don't think that's it, but certainly could be a possibility.

    I read some more in the help for Acronis and saw that I should have checked restore disk signature which I hadn't done on the initial restore.

    And I don't have any peripherals attached to the HP other than the WD EHD I used to do the restore with for info.
      My ComputerSystem Spec


  5. Posts : 4,333
    Win 10 Pro x64
       15 Oct 2014 #15

    Ok. It's just so weird that W10 won't install on that PC. I just installed Win 10 on my 7 year old hp laptop running on AMD Turion cpu and it went smoothly. But it's 32-bit though. Did you try the 32 bit? Maybe that will work.
    Last edited by badrobot; 15 Oct 2014 at 11:34.
      My ComputerSystem Spec

  6.    15 Oct 2014 #16

    Well, I'm restored and booting properly. Still not sure why it didn't work as it was supposed to the first time though I'm beginning to think I 'assigned' something wrong the first time I tried it. Otherwise why would the USB stick just boot and take me to Windows instead of to the Acronis stuff?

    I'm probably going to leave this alone as far as the TP goes and just use the virginized version in the VM.

    As to why it won't install as an upgrade and run as the only OS, I sure don't know. Has to be something that it doesn't like, probably some driver, possibly the Beats audio stuff.
      My ComputerSystem Spec

  7.    15 Oct 2014 #17

    lparsons21 said: View Post
    I'll look at that after I do the re-restore. I don't think that's it, but certainly could be a possibility.

    I read some more in the help for Acronis and saw that I should have checked restore disk signature which I hadn't done on the initial restore.

    And I don't have any peripherals attached to the HP other than the WD EHD I used to do the restore with for info.
    Could you post a link to where you read the "restore disk signature" on the Acronis site ?
    I have not heard of this before and would like to understand it.
      My ComputersSystem Spec

  8.    15 Oct 2014 #18

    COMPUTIAC said: View Post
    Could you post a link to where you read the "restore disk signature" on the Acronis site ?
    I have not heard of this before and would like to understand it.
    I didn't read it on the web, it was in the help that is part of the Acronis True Image 2014 software. It was in the help about restore options.
      My ComputerSystem Spec

  9.    15 Oct 2014 #19

    lparsons21 said: View Post
    I didn't read it on the web, it was in the help that is part of the Acronis True Image 2014 software. It was in the help about restore options.
    OK, as usual I misunderstood. I will look for it.

    When I installed Win 10 in a VM the 64 bit version would not work for me either. Once I tried the 32 bit as a member suggested, it went in easily, no driver problems or anything else.
    I don't think your Beats stuff would stop it.
    Last edited by COMPUTIAC; 15 Oct 2014 at 15:38.
      My ComputersSystem Spec

  10.    15 Oct 2014 #20

    I don't think the Beats stuff would either.

    But I'm in the process of trying it again. Just because I could, I went and downloaded the 64-bit ISO again. This time it was a little bigger than the last time. I got to wonder if I possibly had a bad download previously or not.

    Also this time I disabled the malware resident program thinking there is a possibility it interfered.

    I'm a bit away from the last boot, but will report back whichever way it turns out.
      My ComputerSystem Spec


 
Page 2 of 4 FirstFirst 1234 LastLast

Related Threads
Hi there You CAN activate Windows 10240 on to a new system if you've copied / restored from an already activated image even if it's on different hardware. After re-boot smply update some of the drivers --Video / graphics is usually the most...
I installed the 32 bit version of W10 on an old Acer laptop to get back up to speed with developments, and one of the first questions or issues that cropped up is when using W10's disk image utility to make a system image. I deliberately wished to...
The following just might be useful to a Windows 8+, Windows 10+ user having similar crashNburn & recovery. My original post in a few Windows 7 forums: Windows 7 Pro "Dirty Install" instructions needed. Is there a link here or elsewhere for...
Starting Acronis UEFI Loader in Backup and Restore
Following a recent update to my build, the start screen became interrupted by the message above. The full message is: Starting Acronis UEFI Loader ... Select an item by using the keyboard: 1. Acronis True Image 2015 2. Acronis System Report...
Solved In defence of Acronis ATH 2015 in Backup and Restore
Hi there I've long complained that the Interface on Acronis is just getting crazier and crazier. They reached the peak level of complexity with ATH 2014. I'm please to see that with ATH 2015 the interface has been totally re-written and has gone...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:59.
Find Us