1.    23 Sep 2015 #1
    Join Date : Sep 2015
    NZ
    Posts : 3
    Win10 previously Win7

    Windows 10 wont automatic repair my Acer Aspire 5560G ( unable to boot


    run down of errors when i try to do automatic repair:


    1.Troubleshoot>Reset this PC>Keep my files> = error: The drive where Windows is installed is locked. Unlock the drive and try again.

    2.Troubleshoot>Reset this PC>Removes everything>= error:Unable to reset your PC. A required drive partition is missing.

    3.Troubleshoot>Advance options>System restore>= error: System restore: To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.

    4. Troubleshoot>System Image Recovery>= error:Windows cannot find a system image on this computer. Attach the backup hard disk or insert the final DVD from a backup set and click retry. Alternatively close this dialog for more options.

    5.Troubleshoot>Startup repair>= error: start up repair couldn't repair PC. Press advance to try other options to repair you PC or "shutdown" to turn off your PC. Log file:

    6.Troubleshoot>Go back to the previous build>= Windows ran into a problem and wont be able to take you back to the previous build. Try resetting your current build instead(Troubleshoot > Reset this PC).

    7. Install>Upgrade>Compatibility report: The computer started using the Windows installation media. Remove the installation media and restart your computer so that windows stars normally. Then, insert the installation media and restart the upgrade.

    8.Install>Custom> We couldnt find any drivers. To get a storage driver, click load driver

    when trying to load the USB it says no signed drivers were found. Make sure that the installation media contains the correct drivers, and then click OK



    SO any tips on how to fix any of these. I just want to get my laptop running at this point and probably go back to windows 7. dont mind losing my files cus most were backed up
      My ComputerSystem Spec
  2.    23 Sep 2015 #2
    Join Date : Oct 2014
    Posts : 942
    Windows 8.1, Win10Pro

    You could try booting from Win10 installation media and running startup repair from there.
      My ComputerSystem Spec
  3.    23 Sep 2015 #3
    Join Date : Sep 2015
    NZ
    Posts : 3
    Win10 previously Win7
    Thread Starter

    boot from a dvd?
      My ComputerSystem Spec
  4.    24 Sep 2015 #4
    Join Date : Oct 2014
    Posts : 942
    Windows 8.1, Win10Pro

    The Microsoft Media Creation tool allows you to create either a DVD or a bootable USB stick of the Windows 10 version you need: http://windows.microsoft.com/en-us/w...d=ms_wol_win10
      My ComputerSystem Spec
  5.    25 Sep 2015 #5
    Join Date : Sep 2015
    NZ
    Posts : 3
    Win10 previously Win7
    Thread Starter

    So currently my laptop wont boot win10 so I created the media and am booting win10 from a usb and the errors I previously listed are what I am getting. So even after booting I can't get windows 10 to recover or install it again it's not letting me so I don't know what else to try?
      My ComputerSystem Spec
  6.    28 Oct 2015 #6

    I'm having the same problem with the WindowsISO DVD. Reset can't be done. No error given though. Can't boot into Windows10 at all. Strange thing is that Recovery Options only list Windows7 as the Target. I upgraded from Win7 to Win10 two months ago. You think Windows10 is somehow gone?

    When PC starts, shows the Win10 Logo and then just goes to a black screen. Only the mouse pointer works. It stays that way for hours. A little intermittent hard-drive light activity, but nothing else. Peripherals work, but it never gets past eh black screen, and Recovery options (Reset, Restore, etc.) on the ISO DVD I made last month, all error out. Weird. I might have to do a full re-install that wipes out everything. Will only do so as a last resort however. Will keep searching forum and internet for answers. (Typing this from a laptop)
      My ComputerSystem Spec
  7.    28 Oct 2015 #7
    Join Date : Sep 2015
    Posts : 2,377
    Windows 10 Pro 64-bit 1706 (CU build 15063.674)

    If you got that after some updates, new drivers/application installation, then you could try returning to a previous working restore point. If starting System Restore with the DVD-ROM doesn't work, try using the recovery CD-ROMs from this post. Booting with one of these, you start a Windows 10 or 8.1 live CD with tools to recover your PC. I don't remember exactly which tools are included, but there should be one to load a restore point. In worst case, using that you can backup all your data to another disk and then format and clean-install Windows 10.
      My ComputerSystem Spec
  8.    29 Oct 2015 #8

    Thankyou SPapaKons. I tried several things, but ended up reinstalling the 2009 version of Windows7, letting it go through a ton of updates and then upgrading to Windows10. The back-up was 34gb, so I opted out. Lost 5 years of "stuff", but of course, this HP PC is faster now. Gotta look on the bright side.
      My ComputerSystem Spec
  9.    29 Oct 2015 #9
    Join Date : Sep 2015
    Posts : 2,377
    Windows 10 Pro 64-bit 1706 (CU build 15063.674)

    If the data lost wasn't important, then why not?
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Windows 10 fails to install on Acer Aspire Z5801: 2 attempts so far
Hey, As the title states, I am having difficulties installing Windows 10 on one of the PCs in my house. The problem: During the upgrade process, the screen will suddenly turn black. During this, nothing appears to be happening - no cursor,...
Installation and Upgrade
After Interrupted HD Repair Windows 10 wont boot
Hiya i _think_ this is the correct forum. PC has Windows 8.1 on SSD and Windows 10 on HDD. The install of Windows 10 was over a Windows 7 installation - and i had it keep all data and programs. Which is did successfully. When booting in...
General Support
acer aspire 7750G black sceen on boot and from sleep
I have an Acer 7750G that I upgraded from windows 7 to 10 Home before the upgrade it booted up fine and from sleep fine. Now I get a black screen on boot and from sleep. From sleep it takes 1:17 to wake up to login screen and from shutdown 1:48 to...
General Support
Problems with Acer Aspire 5749 on Windows 10 Home 64-bit
I am having an issue with my system. It keeps acting like its overheating. I have noticed the fan kicking in and out at high speeds and it gets loud. Anyone know of a way to fix this?
General Support
How does the Acer Aspire 6920 cope with a Windows 10 upgrade?
I am currently running Windows 7 and would like to upgrade to Windows 10. Will my Acer Aspire be able to cope with it? I have a one terabit internal hard drive and an external terabit hard drive.
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:47.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums