HP Pavilion x360 failed go up after instalation (0xc000098 error)

hi.
so i try to instal windows 10 from dok in my laptor (HP Pavilion x360).
i used refus to write the instalation in partion scheme GPT to UEFI like in this turial:
How to create a bootable USB drive with RUFUS - GPT - UEFI - New Laptops - YouTube

after that the instalation up and in the screen of hard drive its not detect my ssd in istalation, so i saw that i need a driver:
Intel® Rapid Storage Technology Driver Installation

i put this in other dok and its work well, the ssd showed.
after the instalation complete, and laptop got rebot i have 0xc000098 error (i add picture)

i try serverl things like in this turial:
Fix Boot Error Code 0xC0000098 - YouTube

but nothing not work for me,
again when i try to do things to figure out 0xc000098 problem, cmd not found any hard drive in laptop (when i use diskpart and list disks for exampale)

any idea what i can do?
thanks.

steve108 said:

Hello yacovmateo and welcome to TF ,

Try F8, then boot to safe mode and see if that is successful .

this is what i got:
the file is from F6flpy-x64 (Intel® VMD) driver.

steve108 said:

There is no need to use Rufus to create a Windows 10 install media: https://www.microsoft.com/en-us/soft...load/windows10 MCT is perfectly capable of doing it. I don't understand why people are so hung up on Rufus in a basic situations like this.

Maybe you or someone else can enlighten me.

couse in partition scheme REFUS gave to do that in GPT and only with GPT partition scheme you can upload you usb boot device and install os, with mbr you cannot with laptop that you cant or not aviable legacy mode in bios.

steve108 said:

Can you boot from Windows install media and try repair option?

also not work for me, maybe the ssd is damaged?

Do you have a Win 10 installation iso file?

Did you booted the USB drive as UEFI?

During installation, did you deleted all partitions on the drive till you have one and only one unallocated space and then proceed?

Megahertz said:

Do you have a Win 10 installation iso file?

yes

Megahertz said:

Did you booted the USB drive as UEFI?

yes, GPT TO UEFI in REFUS

Megahertz said:

During installation, did you deleted all partitions on the drive till you have one and only one unallocated space and then proceed?

yes i deleted all partion, and make new one,
lts said i have 512GB DRIVE of ssd,
i alocated only one parttion in then press next on him (there is more 200GB~ , that i not alocated it all)

Lets start over without Rufus

Open a CMD window as administrator and type:

diskpart
list disk (it will list all drives. Identify the USB drive number)
select disk n (replace n by the USB drive number obtained with list disk)
clean
convert mbr
create part primary
select part 1
format fs=fat32 quick
assign
active
exit (to exit diskpart)

On Win 10, mount the iso file and copy all files and folders to the USB drive.
(I'm supposing that you downloaded the iso using MCT and you have Sources\install.esd and not Sources\install.wim)

During POST, press F9(?) to launch the boot menu. You will see two options for the USB drive. USB UEFI (Name) and USB (Name). Select USB UEFI (Name).
Go to install and delete ALL partitions on the SSD till you have one and only one unallocated space and then proceed.
If you don't want to use MS account, don't enable updates or connect to the internet during installation.