WppRecorder.sys problem when updating Windows 10 from 1909 to 20H2

Page 3 of 6 FirstFirst 12345 ... LastLast
  1. smartcooky's Avatar
    Posts : 86
    Windows 10 Home 32 bit
    Thread Starter
       #21

    zbook said:
    7) Run HD Tune (free version) (all drives)
    HD Tune website
    Post images into the thread for results on these tabs:
    a) Health
    b) Benchmark
    c) Full error scan
    Done

    C-Drive (System) https://www.dropbox.com/sh/eme3tlyti...ajaMh6fFa?dl=1

    D-Drive (Data) https://www.dropbox.com/sh/8dydu2llp...G4zG_nesa?dl=1

    T-Drive (Dropbox-GoogleDrive) https://www.dropbox.com/sh/uv8xk4bwv...N1eVIjbta?dl=1
      My Computers


  2. Posts : 38,400
    windows 10 professional version 1607 build 14393.969 64 bit
       #22

    How come there were no full error scan test results?
      My Computer

  3. smartcooky's Avatar
    Posts : 86
    Windows 10 Home 32 bit
    Thread Starter
       #23

    zbook said:
    8) Run Sea Tools for Windows
    long generic test
    Post an image of the test result into the thread
    Windows 版 SeaTools |
    Seagate

    如何使用 Windows 版 SeaTools | Seagate 支持 *国
    Done
    https://www.dropbox.com/sh/3n5xtb7os...c31S_Ulia?dl=1

    - - - Updated - - -

    zbook said:
    How come there were no full error scan test results?
    They are there, in the folders, files called....

    HDTune_Error_Scan_.png

    ...for each drive



    You asked for screenshots of those three things (Benchmark, Heath, Error Scan) that's what the HD Tune dialog showed.
      My Computers


  4. Posts : 38,400
    windows 10 professional version 1607 build 14393.969 64 bit
       #24

    The HD Tune software has the full error scan.

    Click the start button.
    It will display green for good and red for bad blocks.
    These can take substantial time so run overnight.
      My Computer

  5. smartcooky's Avatar
    Posts : 86
    Windows 10 Home 32 bit
    Thread Starter
       #25

    zbook said:
    The HD Tune software has the full error scan.

    Click the start button.
    It will display green for good and red for bad blocks.
    These can take substantial time so run overnight.
    OK, figured out what I did wrong.

    Its done now for Drive C so it will be in the link

    I will copy the drive T and D error scans when they are done.

    ETA:
    T drive is now done and in the link.
    D Drive will take longer as its a 1TB drive

    ETA2: D drive is now done and in the link

    - - - Updated - - -

    zbook said:
    Please reboot into safe mode as a trial and error step to run each:
    Boot into Safe Mode on Windows 10

    Upgrade_failure_info.bat - Click here to go to the BSOD batch repository to download and run this batch file.

    V2:
    https://www.tenforums.com/bsod-crashes-debugging/2198-bsod-posting-instructions.html#V2
    Upgrade_failure_info.bat still will not run in safe mode. The command windows just moves up and down the desktop but does nothing
    ETA: FYI, this is what it looks like if I try to run upgrade_failure_info.bat in safe mode

    https://www.dropbox.com/s/64dqvx1d38...41054.mp4?dl=1

    Doesn't matter whether I run in F4 (with a desktop) or F6 (with command prompt). The result is the same


    V2 ran successfully in safe mode, here is the resulting file

    https://www.dropbox.com/s/dme8col961...24%29.zip?dl=1


    ************************************************************************************************

    Quick Question about this
    11) Place the computer in clean boot:
    https://support.microsoft.com/en-us/...oot-in-windows
    How to perform a Clean Boot in Windows 10 - TechNet Articles - United States (English) - TechNet Wiki
    https://social.technet.microsoft.com...indows-10.aspx
    Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts

    12) Detach all SATA devices other than the disk drive that has the Windows operating system
    (Make sure that the only disk drive that is attached to the computer at the time of the upgrade attempt is the disk drive containing Windows)
    (Other disk drives may be able to be detached by disconnecting cables or if necessary to remove the drive from the computer)
    This is the order I should do it in? Clean boot to windows THEN disconnect the DVD and D drive and T drive. It is safe to do that with windows running?
    Last edited by smartcooky; 4 Weeks Ago at 19:42.
      My Computers


  6. Posts : 38,400
    windows 10 professional version 1607 build 14393.969 64 bit
       #26

    During an upgrade it's best to have only one drive attached.
    Other drives can be removed or the cables can be detahed.

    Once the computer is placed in clean boot it remains there.
    During an upgrade it may return to normal boot.

    Please post a new link into newest post once the full error scans are completed.


    If the upgrade fails then collect these log files:

    LOGS.bat - Click here to go to the BSOD batch repository to download and run this batch file.

    V2 / DM

    C:\Windows\inf\setupapi.dev.log
    Setupmem.dmp


    Do not attempt to upgrade and do not place the computer in clean boot at this time.

    The next step is WDV once you understand how to run commands in safe mode to turn off the tool and return to the desktop.
      My Computer

  7. smartcooky's Avatar
    Posts : 86
    Windows 10 Home 32 bit
    Thread Starter
       #27

    zbook said:
    During an upgrade it's best to have only one drive attached.
    Other drives can be removed or the cables can be detahed.

    Once the computer is placed in clean boot it remains there.
    During an upgrade it may return to normal boot.

    Please post a new link into newest post once the full error scans are completed.
    I am a bit confused here. I thought I had already run all the batch files you asked me to. Looking back, I cannot see any I have missed?

    zbook said:
    If the upgrade fails then collect these log files:

    LOGS.bat - Click here to go to the BSOD batch repository to download and run this batch file.

    V2 / DM

    C:\Windows\inf\setupapi.dev.log
    Setupmem.dmp


    Do not attempt to upgrade and do not place the computer in clean boot at this time.

    The next step is WDV once you understand how to run commands in safe mode to turn off the tool and return to the desktop.
    This is also confusing - you are telling me what to do if the upgrade fails, but you don't want me to attempt an upgrade (?)
      My Computers


  8. Posts : 38,400
    windows 10 professional version 1607 build 14393.969 64 bit
       #28

    Which link displays the results of all of the drives full error scans?
    please post a link into the next post.
    The next steps are WDV and BIOS upgrade followed by windows upgrade.
    Always place links with the skipped or newest data into the newest post rather than updating an old post.
    Detaching drives is not performed until the upgrade attempt.

    Tomorrow please post new V2 and LOGS.
      My Computer

  9. smartcooky's Avatar
    Posts : 86
    Windows 10 Home 32 bit
    Thread Starter
       #29

    HD Tune

    C drive - Dropbox - HDTune-C(system)

    D Drive - Dropbox - HDTune-D(Data)drive

    T Drive - Dropbox - HDTune-TDrive

    zbook said:
    The next steps are WDV and BIOS upgrade followed by windows upgrade.
    Always place links with the skipped or newest data into the newest post rather than updating an old post.
    Detaching drives is not performed until the upgrade attempt.
    Tomorrow please post new V2 and LOGS.
    So new V2 and LOGS after the update attempt?

    If so, this probably wont be tomorrow as this a work computer and is used until late.
    Last edited by smartcooky; 1 Week Ago at 04:54.
      My Computers


  10. Posts : 38,400
    windows 10 professional version 1607 build 14393.969 64 bit
       #30

    When you understand the methods to recover from WDV crashes (see post #14) you can start the tool.
    a) make a new restore point
    b) upload a new V2 / DM after any BSOD
    c) run LOGS > post a share link

    There should be no upgrade attempts until progress is made with WDV and BIOS.



    LOGS.bat - Click here to go to the BSOD batch repository to download and run this batch file.

    DiskParInfo.bat - Click here to go to the BSOD batch repository to download and run this batch file.


      My Computer


 
Page 3 of 6 FirstFirst 12345 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:01.
Find Us




Windows 10 Forums