windows 10 from 7 upgrade failed.

Page 1 of 3 123 LastLast

  1. Posts : 16
    slackware
       #1

    windows 10 from 7 upgrade failed.


    i'm trying to upgrade two computers for a friend. she has a lot of crap installed and has bad eyesight so doesn't want to go through the hassle of reinstalling it all, so i am upgrading them for her. we did the desktop, an older dell but the laptop, an xps l702x failed. i didn't catch where it was the first time since i was doing them both at the same time. the next time, i did a clean boot, disabled all startup items except microsoft, uninstalled norton 360 and tried again. this time, the error message shows 0x8007042c - 0x90018. looking at the logs in the panther folder, it shows a lot of the following: MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2004]

    i've been looking at all sorts of forums and answers, but none match what i am having. perhaps someone can assist if i post the entire logs? the second time i tried to install it i watched it get all the way through the install, then 71% into the updates and it failed. i brought it home and rebooted in safe mode with networking and tried, then it failed again. i went through and enabled all the processes i thought i needed with reg add in the elevated cmd, but may have missed one. here are the full logs in case anyone can help.

    2021-01-26 13:50:27, Info MOUPG *************** SetupHost Logging Begin ***************
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize: ModulePath = [C:\$Windows.~WS\Sources]
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize: WorkingPath = [C:\$Windows.~WS\Sources]
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize: LoggingPath = [C:\$Windows.~WS\Sources\Panther]
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize: MediaPath = []
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize: InstallFilePath = []
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize: ActionListFilePath = []
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize: CmdLine = [/Download /Web ]
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize: Mode = [0x8]
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize: Scenario = [0x7]
    2021-01-26 13:50:27, Info MOUPG SetupHost::Initialize: Flags = [0x800]
    2021-01-26 13:50:27, Info MOUPG SetupHost: Setup build version is: 10.0.19041.572 (vb_release_svc_prod1.201007-1724)
    2021-01-26 13:50:27, Info CONX Host OS version: 6.1.7601.1130 Service Pack 1 (1.0) Platform 0x2, SuiteMask 0x100, ProdType 0x1
    2021-01-26 13:50:27, Info CONX Source OS: Host SKU Info: Edition = 'Professional', Edition Type = 'Client', Installation Type = 'Complete', Product Name = 'Windows 7 Professional', Arch = amd64, StationType = Client Workstation, Stage type = Staged Image
    2021-01-26 13:50:27, Info MOUPG Host OS License State [ UNAVAILABLE ]
    2021-01-26 13:50:27, Info MOUPG Host OS Architecture [ x64 ]
    2021-01-26 13:50:27, Info MOUPG Host OS Language Id [ 1033 ]
    2021-01-26 13:50:27, Info MOUPG User UI Language Id [ 1033 ]
    2021-01-26 13:50:27, Info MOUPG Host OS Edition [ Professional ]
    2021-01-26 13:50:27, Info MOUPG Host OS Version [ 6.1.7601 ]
    2021-01-26 13:50:27, Info MOUPG Host OS Build String [ 7601.24545.amd64fre.win7sp1_ldr_escrow.200102-1707 ]
    2021-01-26 13:50:27, Info MOUPG SetupHost::InitializeComponents
    2021-01-26 13:50:27, Info MOUPG SetupHost: Loading ID: [c7b6e4de-b741-42d8-ac05-16738c9e0bc5] from [C:\$Windows.~WS\Sources\MediaSetupUIMgr.dll]...
    2021-01-26 13:50:27, Info MOUPG SetupHost: Loading complete.
    2021-01-26 13:50:27, Info MOUPG CInstallUI::Initialize
    2021-01-26 13:50:27, Info MOUPG SetupHost: Loading ID: [3d3ad714-f8d8-4c84-ad5f-10938c2f3339] from [C:\$Windows.~WS\Sources\SetupCore.dll]...
    2021-01-26 13:50:27, Info MOUPG SetupHost: Loading complete.
    2021-01-26 13:50:27, Info MOUPG SetupHost: Loading AutomationManager manager...
    2021-01-26 13:50:27, Info MOUPG SetupHost: Loading ID: [edac948b-844e-4a51-9ba9-34520bd9ff9f] from [C:\$Windows.~WS\Sources\SetupCore.dll]...
    2021-01-26 13:50:27, Info MOUPG SetupHost: Loading complete.
    2021-01-26 13:50:27, Info MOUPG SetupHost: Initializing automation...
    2021-01-26 13:50:27, Error MOUPG CInstallUI::GetDefaultLanguage(2027): Result = 0x80070002[gle=0x00000002]
    2021-01-26 13:50:27, Info MOUPG SetupHost: Automation information not found. Releasing automation object.
    2021-01-26 13:50:27, Info MOUPG SetupHost: Attempting to initialize OneSettings values
    2021-01-26 13:50:27, Info MOUPG OneSettings: OS [windows]
    2021-01-26 13:50:27, Info MOUPG OneSettings: OsVer [6.1.7601.24544.amd64fre.win7sp1_ldr_escrow.200102-1707]
    2021-01-26 13:50:27, Info MOUPG OneSettings: ScenarioId [7]
    2021-01-26 13:50:27, Info MOUPG OneSettings: EditionId [Professional]
    2021-01-26 13:50:27, Info MOUPG OneSettings: InstallationType [Client]
    2021-01-26 13:50:27, Info MOUPG OneSettings: Sku [48]
    2021-01-26 13:50:27, Info MOUPG OneSettings: DeviceId [{C9059879-DA73-4B85-969C-1DA7EE24642E}]
    2021-01-26 13:50:27, Info CONX Target OS version: 10.0.19041.572
    2021-01-26 13:50:27, Info MOUPG OneSettings: AppVer [10.0.19041.572]
    2021-01-26 13:50:27, Info MOUPG OneSettings: Branch [vb_release_svc_prod1]
    2021-01-26 13:50:27, Info MOUPG OneSettings: Initialization succeeded, found 1 values.
    2021-01-26 13:50:27, Info MOUPG SetupHost: OneSettings Initialized -> [Yes]
    2021-01-26 13:50:27, Info MOUPG OneSettings: Found [MIGNEOENABLED] -> [False]
    2021-01-26 13:50:27, Info MOUPG SetupHost: Loading ID: [c7b6e4de-b741-42d8-ac05-16738c9e0bc5] from [C:\$Windows.~WS\Sources\SetupMgr.dll]...
    2021-01-26 13:50:27, Info MOUPG SetupHost: Loading complete.
    2021-01-26 13:50:27, Info MOUPG SetupManager::Initialize: WorkingPath = [C:\$Windows.~WS\Sources]
    2021-01-26 13:50:27, Info MOUPG SetupManager::Initialize: MediaPath = []
    2021-01-26 13:50:27, Info MOUPG SetupManager::Initialize: InstallFilePath = []
    2021-01-26 13:50:27, Info MOUPG SetupManager::Initialize: ActionListFilePath = []
    2021-01-26 13:50:27, Info MOUPG SetupManager::Initialize: Mode = [0x8]
    2021-01-26 13:50:27, Info MOUPG SetupManager::Initialize: Scenario = [0x7]
    2021-01-26 13:50:27, Info MOUPG SetupManager::Initialize: Flags = [0x800]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Working Directory: [C:\$Windows.~WS\Sources]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Local Media Path: [C:\$Windows.~WS]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Scratch Path: [C:\$Windows.~WS\Sources\Panther]
    2021-01-26 13:50:27, Info MOUPG SetupManager: ESD Download Path: [C:\ESD\Download]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Media Path: []
    2021-01-26 13:50:27, Info MOUPG SetupManager: Drivers Path: [C:\$Windows.~WS\Drivers]
    2021-01-26 13:50:27, Info MOUPG SetupManager: LangPacks Path: [C:\$Windows.~WS\LangPacks]
    2021-01-26 13:50:27, Info MOUPG SetupCore::Initialize
    2021-01-26 13:50:27, Info MOUPG SetupCore::RegisterSetupActions
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered IMAGE_EXIT action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered DU_SETUP action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered DU_IMAGE action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered COMPAT_SYSREQ action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered COMPAT_GATED action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered COMPAT_DOWNLOADREQ action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered DISKSPACE_DOWNLOADREQ action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered DISKSPACE_INSTALLREQ action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered COMPAT_MIGCHOICE action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered PKEY_VALIDATE action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered EULA action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered COMPAT_INSTALLREQ action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered COMPAT_FINALIZEREQ action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered DISK_PARTITION action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered COMPAT_RECOVERYREQ action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered ACTIVATION action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered SUMMARY action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered IMAGE_DEPLOY action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered DATA_MIGRATE action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered PACKAGE_MIGRATE action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered DEBUGGER_OPTIONS action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered PRE_FINALIZE action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered IMAGE_FINALIZE action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered BOOT_FINALIZE action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered ADVERTISE action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered INSTALL_GET_WEBSETUP_USER_INPUT action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered MEDIA_CREATE_SUCCESS action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered PKEY_GET_EDITION action
    2021-01-26 13:50:27, Info MOUPG SetupCore: Registered UPDATEMEDIA action
    2021-01-26 13:50:27, Info MOUPG DlpMgrInit: WorkingPath = [C:\$Windows.~WS\Sources\Panther], Disposition = [Create], Flags = [0x1], Diagnostics = [Yes], StockRegistrar = [Yes], UserRegistrar = [Yes]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Region detected [US]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [1], Value = [9]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [2], Value = [7]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [4], Value = [8]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [17], Value = [132561606277577065]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [9], Value = [0]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [15], Value = [3717f6cb-0673-4475-9af8-0612514476eb]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [13], Value = [0]
    2021-01-26 13:50:27, Info MOUPG SetupManager: WebSetup data file not found
    2021-01-26 13:50:27, Info MOUPG SetupManager: DiagnosticPrompt Disabled via detection.
    2021-01-26 13:50:27, Info MOUPG SetupManager: PartitionResize Enabled by default.
    2021-01-26 13:50:27, Info MOUPG SetupManager: NEO Constraint set via override: [-1].
    2021-01-26 13:50:27, Info MOUPG SetupManager: Target Drive Letter set to [C] via default.
    2021-01-26 13:50:27, Info MOUPG SetupManager: DU Channels Flag -> [0x3]
    2021-01-26 13:50:27, Info MOUPG SetupManager: DU Categories Flag -> [0x3F]
    2021-01-26 13:50:27, Info MOUPG SetupManager: DU Choice Cmdline -> [0x7F]
    2021-01-26 13:50:27, Warning MOUPG SetupHost: Unexpected scenario - defaulting postoobe/rollback commands!
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [16], Value = [0]
    2021-01-26 13:50:27, Info MOUPG SetupHost::Execute
    2021-01-26 13:50:27, Info MOUPG Setup StudyID was [not found]
    2021-01-26 13:50:27, Info MOUPG A previous StudyID was [not restored]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [22], Value = [0]
    2021-01-26 13:50:27, Info MOUPG SetupManager::Execute called
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [3], Value = [0]
    2021-01-26 13:50:27, Info MOUPG SetupManager: Reporting Data - DataId = [18], Value = [1]
    2021-01-26 13:50:27, Info MOUPG SetupUI: Detecting connected standby capability...
    2021-01-26 13:50:27, Error MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
    2021-01-26 13:50:27, Warning MOUPG SetupUI::BlockSystemSleep - CheckConnectedStandby failed: [0x80070057]
    2021-01-26 13:50:27, Info MOUPG SetupUI: Creating power request...
    2021-01-26 13:50:27, Info MOUPG SetupUI: Calling PowerSetRequest with type [0x1]...
    2021-01-26 13:50:27, Info MOUPG SetupUI: Power request granted!
    2021-01-26 13:50:27, Info MOUPG SetupManager:etermineSetupPhase: CurrentSetupPhase [SetupPhasePreDownload]
    2021-01-26 13:50:27, Info MOUPG Setup phase change: [SetupPhaseUnknown] -> [SetupPhasePreDownload]
    2021-01-26 13:50:27, Info MOUPG CreateDlpFile: Source = [https://go.microsoft.com/fwlink/?LinkId=841361], Target = [C:\$Windows.~WS\Sources\products.cab]
    2021-01-26 13:50:27, Info MOUPG ConnectToSourceUrl: Port: [443], Secure -> [TRUE]
    2021-01-26 13:50:27, Info MOUPG ConnectToSourceUrl: No IE proxy settings.
    2021-01-26 13:50:27, Info MOUPG ConnectToSourceUrl: Trying auto-detect...
    2021-01-26 13:50:27, Warning MOUPG ConnectToSourceUrl: Unable to retrieve proxy info for URL -> [0x2f94].
    2021-01-26 13:50:28, Info MOUPG CheckHttpRequestStatus: WinHttpQueryHeaders Status -> [200]
    2021-01-26 13:50:28, Info MOUPG PrepareFile: HEAD -> Content-Length=[43745]
    2021-01-26 13:50:28, Info MOUPG ConnectToSourceUrl: Port: [443], Secure -> [TRUE]
    2021-01-26 13:50:28, Info MOUPG ConnectToSourceUrl: Requesting -> [Range: bytes=0-43744]
    2021-01-26 13:50:28, Info MOUPG CheckHttpRequestStatus: WinHttpQueryHeaders Status -> [206]
    2021-01-26 13:50:28, Info MOUPG SetupMgr: Expanding cab [C:\$Windows.~WS\Sources\products.cab] to [C:\$Windows.~WS\Sources].
    2021-01-26 13:50:28, Info MOUPG SetupManager::OpenOrCreateTask: Creating new task [PreDownload].
    2021-01-26 13:50:28, Info MOUPG CreateTask: Name = [PreDownload], WorkingPath = [C:\$Windows.~WS\Sources], TransportId = [00000000-0000-0000-0000-000000000000], Flags = [0x0]
    2021-01-26 13:50:28, Info MOUPG Eula: Entering Prepare Method
    2021-01-26 13:50:28, Info MOUPG Eula: Leaving Prepare Method
    2021-01-26 13:50:28, Info MOUPG GetWebSetupUserInput: Entering Prepare Method
    2021-01-26 13:50:28, Info MOUPG GetWebSetupUserInput: Leaving Prepare Method
    2021-01-26 13:50:28, Info MOUPG DlpTask: Entering Execute Method
    2021-01-26 13:50:28, Info MOUPG DlpTask: Transport not set. Skipping download phase.
    2021-01-26 13:50:28, Info MOUPG DlpTask: Executing Actions...
    2021-01-26 13:50:28, Info MOUPG Action execution thread timeout period: [1000 ms]
    2021-01-26 13:50:28, Info MOUPG Eula: Initializing Eula File Path: []
    2021-01-26 13:50:28, Info MOUPG Eula: Initializing AcceptEulaDefault: [FALSE]
    2021-01-26 13:50:28, Info MOUPG ProgressHandlerAction: Sending initial progress message for action [0].
    2021-01-26 13:50:28, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2002]
    2021-01-26 13:50:28, Info MOUPG CInstallUI::OnActionChanged
    2021-01-26 13:50:28, Info MOUPG CInstallUI::OnActionChanged: Posted MSG_INSTALLUI_UPDATE_PROGRESS
    2021-01-26 13:50:28, Info MOUPG Eula: Entering Execute Method
    2021-01-26 13:50:28, Info MOUPG Eula: Using Online Store version = [1.4.1].
    2021-01-26 13:50:29, Info MOUPG Action progress: [0%]
    2021-01-26 13:50:29, Info MOUPG Task progress: [0%]
    2021-01-26 13:50:29, Info MOUPG Overall progress: [0%]
    2021-01-26 13:50:29, Info MOUPG Mapped Global progress: [0%]
    2021-01-26 13:50:29, Info MOUPG Setup Phase: [2]
    2021-01-26 13:50:29, Info MOUPG Setup SubPhase: [24]
    2021-01-26 13:51:13, Info MOUPG Eula: Getting EULA for language: [en-us]
    2021-01-26 13:51:13, Info MOUPG Eula: Eula File Url From Online Store: [https://download.microsoft.com/download/C/0/3/C036B882-9F99-4BC9-A4B5-69370C4E17E9/EULA_MCTool_EN-US_6.27.16.rtf]
    2021-01-26 13:51:13, Info MOUPG CreateDlpFile: Source = [https://download.microsoft.com/download/C/0/3/C036B882-9F99-4BC9-A4B5-69370C4E17E9/EULA_MCTool_EN-US_6.27.16.rtf], Target = [C:\$Windows.~WS\Sources\Panther\Eula.rtf]
    2021-01-26 13:51:13, Info MOUPG ConnectToSourceUrl: Port: [443], Secure -> [TRUE]
    2021-01-26 13:51:13, Info MOUPG ConnectToSourceUrl: No IE proxy settings.
    2021-01-26 13:51:13, Info MOUPG ConnectToSourceUrl: Trying auto-detect...
    2021-01-26 13:51:13, Warning MOUPG ConnectToSourceUrl: Unable to retrieve proxy info for URL -> [0x2f94].
    2021-01-26 13:51:13, Info MOUPG CheckHttpRequestStatus: WinHttpQueryHeaders Status -> [200]
    2021-01-26 13:51:13, Info MOUPG PrepareFile: HEAD -> Content-Length=[204389]
    2021-01-26 13:51:13, Info MOUPG ConnectToSourceUrl: Port: [443], Secure -> [TRUE]
    2021-01-26 13:51:13, Info MOUPG ConnectToSourceUrl: Requesting -> [Range: bytes=0-204388]
    2021-01-26 13:51:13, Info MOUPG CheckHttpRequestStatus: WinHttpQueryHeaders Status -> [206]
    2021-01-26 13:51:13, Info MOUPG Eula: Eula File Path: [C:\$Windows.~WS\Sources\Panther\Eula.rtf]
    2021-01-26 13:51:13, Info MOUPG Eula: Entering Response Execute Method
    2021-01-26 13:51:13, Info MOUPG CInstallUI::ShowPage: Posted MSG_INSTALLUI_SWITCH_TO_RESPONSE_PAGE
    2021-01-26 13:51:13, Info MOUPG CInstallUI::CInstallUIMessageWindow::SwitchToResponsePage
    2021-01-26 13:51:13, Info MOUPG CInstallUI::SwitchToResponsePage
    2021-01-26 13:52:58, Info MOUPG CInstallUI::ShowProgress: Posted MSG_INSTALLUI_SWITCH_TO_PROGRESS_PAGE
    2021-01-26 13:52:58, Info MOUPG CInstallUI::CInstallUIMessageWindow::SwitchToProgressPage
    2021-01-26 13:52:58, Info MOUPG CSetupResponseTemplate<class IDlpResponse>::ExecuteRoutine: Next button clicked.
    2021-01-26 13:52:58, Info MOUPG CInstallUI::SwitchToProgressPage
    2021-01-26 13:52:58, Info MOUPG Eula: Leaving Response Execute Method
    2021-01-26 13:52:58, Info MOUPG DeferEula from Response [FALSE]
    2021-01-26 13:52:58, Info MOUPG AcceptEula from Response [TRUE]
    2021-01-26 13:52:58, Info MOUPG Eula: Leaving Execute Method
    2021-01-26 13:52:58, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2004]
    2021-01-26 13:52:58, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2003]
    2021-01-26 13:52:58, Info MOUPG ProgressHandlerAction: Sending final progress message for action [0].
    2021-01-26 13:52:58, Info MOUPG ProgressHandlerAction FinalUpdate: 0x0, 0x64 / 0x64, 0x0
    2021-01-26 13:52:58, Info MOUPG Action: 100%, Delta: 149.85s, 100 ticks, Avg: 0.667 ticks/s
    2021-01-26 13:52:58, Info MOUPG Action progress: [100%]
    2021-01-26 13:52:58, Info MOUPG Task progress: [50%]
    2021-01-26 13:52:58, Info MOUPG Overall progress: [50%]
    2021-01-26 13:52:58, Info MOUPG Mapped Global progress: [50%]
    2021-01-26 13:52:58, Info MOUPG GetWebSetupUserInput: Including retail only editions = [NO].
    2021-01-26 13:52:58, Info MOUPG ProgressHandlerAction: Sending initial progress message for action [1].
    2021-01-26 13:52:58, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2002]
    2021-01-26 13:52:58, Info MOUPG CInstallUI::OnActionChanged
    2021-01-26 13:52:58, Info MOUPG CInstallUI::OnActionChanged: Posted MSG_INSTALLUI_UPDATE_PROGRESS
    2021-01-26 13:52:58, Info MOUPG GetWebSetupUserInput: Entering Execute Method
    2021-01-26 13:52:58, Info MOUPG GetWebSetupUserInput: Entering execute.
    2021-01-26 13:52:59, Info MOUPG Action progress: [0%]
    2021-01-26 13:53:43, Info MOUPG InstallNowOrLater: Entering Response Execute Method
    2021-01-26 13:53:43, Info MOUPG CInstallUI::ShowPage: Posted MSG_INSTALLUI_SWITCH_TO_RESPONSE_PAGE
    2021-01-26 13:53:43, Info MOUPG CInstallUI::CInstallUIMessageWindow::SwitchToResponsePage
    2021-01-26 13:53:43, Info MOUPG CInstallUI::SwitchToResponsePage
    2021-01-26 13:54:48, Info MOUPG CInstallUI::ShowProgress: Posted MSG_INSTALLUI_SWITCH_TO_PROGRESS_PAGE
    2021-01-26 13:54:48, Info MOUPG CSetupResponseTemplate<class IDlpResponse>::ExecuteRoutine: Next button clicked.
    2021-01-26 13:54:48, Info MOUPG InstallNowOrLater: Leaving Response Execute Method
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Execute: Action[1] InstallNow=[TRUE].
    2021-01-26 13:54:48, Info MOUPG CInstallUI::CInstallUIMessageWindow::SwitchToProgressPage
    2021-01-26 13:54:48, Info MOUPG CInstallUI::SwitchToProgressPage
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: HostOs Edition=[Professional].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: HostOs Architecture=[x64].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: HostOs Language[en-US].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Selected Offer:
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Edition=[Professional]
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Language=[en-us]
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Architecture=[x64]
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Execute: Download Url X86 = [(null)].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Execute: Decryption key X86 = [(null)].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Execute: Download file hash X86 = [(null)].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Execute: Download file size X86 = [0].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Execute: Download Url X64 = [http://dl.delivery.mp.microsoft.com/filestreamingservice/files/0cc0c79d-c9a5-42c3-8d35-9e2bd8174965/19042.631.201119-0144.20h2_release_svc_refresh_CLIENTCONSUMER_RET_x64FRE_en-us.esd].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Execute: Decryption key X64 =[].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Execute: Download file hash X64 = [e72fdeb9d729aac486c47a1b93d90ebb6bc83b3e].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Execute: Download file size X64 = [4221613674].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Checking available disk space for drive=[C].
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Drive [C] has [78764] MB of free space.
    2021-01-26 13:54:48, Info MOUPG GetWebSetupUserInput: Leaving Execute Method
    2021-01-26 13:54:48, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2004]
    2021-01-26 13:54:48, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2003]
    2021-01-26 13:54:48, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2001]
    2021-01-26 13:54:48, Info MOUPG ProgressHandlerAction: Sending final progress message for action [1].
    2021-01-26 13:54:48, Info MOUPG ProgressHandlerAction FinalUpdate: 0x1, 0x64 / 0x64, 0x0
    2021-01-26 13:54:48, Info MOUPG Action progress: [100%]
    2021-01-26 13:54:48, Info MOUPG Task progress: [100%]
    2021-01-26 13:54:48, Info MOUPG Overall progress: [100%]
    2021-01-26 13:54:48, Info MOUPG Mapped Global progress: [100%]
    2021-01-26 13:54:48, Info MOUPG ProgressHandlerAction: Sending final progress message for action [1].
    2021-01-26 13:54:48, Info MOUPG ProgressHandlerAction FinalUpdate: 0x1, 0x64 / 0x64, 0x64
    2021-01-26 13:54:48, Info MOUPG Signalling actions thread to shut down.
    2021-01-26 13:54:48, Info MOUPG Waiting for actions thread to exit.
    2021-01-26 13:54:48, Info MOUPG Actions thread has exited.
    2021-01-26 13:54:48, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2004]
    2021-01-26 13:54:48, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2000]
    2021-01-26 13:54:48, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x3000]
    2021-01-26 13:54:48, Info MOUPG DlpTask: Leaving Execute Method
    2021-01-26 13:54:48, Info MOUPG Setup phase change: [SetupPhasePreDownload] -> [SetupPhaseDownload]
    2021-01-26 13:54:48, Info MOUPG SetupManager::OpenOrCreateTask: Creating new task [Download].
    2021-01-26 13:54:48, Info MOUPG CreateTask: Name = [Download], WorkingPath = [C:\$Windows.~WS\Sources], TransportId = [3d5edec5-37a4-4a4f-b5be-9a0a396c2f85], Flags = [0x0]
    2021-01-26 13:54:48, Error MOUPG CDlpTransportBits::GetBitsCopyManager(1775): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Error MOUPG CDlpTransportBits::Initialize(238): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Error MOUPG CDlpTransportBitsFactory::CreateTransport(3219): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Error MOUPG CDlpManager::CreateTransport(770): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Error MOUPG CDlpTask::Initialize(741): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Error MOUPG CDlpManager::CreateTask(655): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Error MOUPG CSetupManager::OpenOrCreateTask(4505): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Error MOUPG CSetupManager::OpenOrCreateTask(4402): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Error MOUPG CSetupManager::OpenOrCreateDownloadTask(3621): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Error MOUPG CSetupManager::ExecuteDownloadMode(8779): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Error MOUPG CSetupManager::ExecuteDownlevelMode(406): Result = 0x8007042C[gle=0x000003f0]
    2021-01-26 13:54:48, Info MOUPG Setup phase change: [SetupPhaseDownload] -> [SetupPhaseError]
    2021-01-26 13:54:48, Info MOUPG SetupManager::OpenOrCreateTask: Creating new task [Exit].
    2021-01-26 13:54:48, Info MOUPG CreateTask: Name = [Exit], WorkingPath = [C:\$Windows.~WS\Sources], TransportId = [00000000-0000-0000-0000-000000000000], Flags = [0x0]
    2021-01-26 13:54:48, Info MOUPG Finalize: Entering Prepare Method
    2021-01-26 13:54:48, Info MOUPG Finalize: Leaving Prepare Method
    2021-01-26 13:54:48, Info MOUPG DlpTask: Entering Execute Method
    2021-01-26 13:54:48, Info MOUPG DlpTask: Transport not set. Skipping download phase.
    2021-01-26 13:54:48, Info MOUPG DlpTask: Executing Actions...
    2021-01-26 13:54:48, Info MOUPG Action execution thread timeout period: [1000 ms]
    2021-01-26 13:54:48, Error MOUPG CSetupManager::GetDUSetupResults(6511): Result = 0x80070490
    2021-01-26 13:54:48, Info MOUPG InitializeRoutine: MOSETUP_ACTION_IMAGE_EXIT
    2021-01-26 13:54:48, Info MOUPG ImageExit: Initializing SetupResult: [0x8007042c]
    2021-01-26 13:54:48, Info MOUPG ImageExit: Initializing Extended: [0x90018]
    2021-01-26 13:54:48, Info MOUPG ImageExit: Initializing Scenario: [7]
    2021-01-26 13:54:48, Info MOUPG ImageExit: Initializing Mode: [8]
    2021-01-26 13:54:48, Info MOUPG ImageExit: Initializing Target: [C]
    2021-01-26 13:54:48, Info MOUPG ImageExit: Initializing SQM: [FALSE]
    2021-01-26 13:54:48, Info MOUPG ImageExit: Initializing PostReboot: [FALSE]
    2021-01-26 13:54:48, Info MOUPG ProgressHandlerAction: Sending initial progress message for action [0].
    2021-01-26 13:54:48, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2002]
    2021-01-26 13:54:48, Info MOUPG Finalize: Entering Execute Method
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Identifier -> [FinalizeExit]
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Loading Setup Platform...
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Determine if the expected version of Setup Platform has been loaded...
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Platform and Setup binaries match!
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Attempting resurrect of Setup Platform object...
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Creating Setup Platform object...
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Setup Platform object created!
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Enable diagnosis mode
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Setting Correlation vector
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Persisting telemetry data
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Restartable: [no]
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Not persisting telemetry data
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Resurrecting NewSystem object from [C:\$Windows.~BT\Sources]
    2021-01-26 13:54:48, Warning MOUPG ImageExit: Unable to resurrect NewSystem object. hr=0x80070002
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [SetupBuildString]=[10.0.19041.572.x86fre.vb_release_svc_prod1.201007-1724] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SetupCompilationType]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SetupVersionMajor]=[0xA] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SetupVersionMinor]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SetupVersionBuildNumber]=[0x4A61] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SetupVersionCSDBuildNumber]=[0x23C] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SetupBuildDate]=[0x3112F] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [SetupBranchName]=[vb_release_svc_prod1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SetupBranchHash]=[0x4C0851F0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SystemPhysicalMemory]=[0xFF60AC] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SystemProcessorCount]=[0x8] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SystemCpuModel]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SystemProcessorArchitecture]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [SystemManufacturer]=[Dell Inc.] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [SystemProductName]=[Dell System XPS L702X] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [SystemCpuDescription]=[Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [WinSatCpuScore]=[0x2DA] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [WinSatDiskScore]=[0x24E] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [WinSatIsScoreValid]=[0x1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [NativeProcessorArchitecture]=[0x9] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [Setup360Scenario]=[0x7] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [Setup360Mode]=[0x8] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [IsWebSetupCreatedMedia]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [LegacySetupInterrupt]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [ReflectDrivers]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [PostRollbackContext]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SetupUpgradeAttempts]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SetupPriority]=[0x1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [EulaTime]=[0x95] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [WebSetupInputMediaType]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [WebSetupInputUpgradeNow]=[0x1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsMajorVersion]=[0x6] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsMinorVersion]=[0x1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsBuildNumber]=[0x1DB1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsArchitecture]=[0x2] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsStageType]=[0x1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsEditionType]=[0x2] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SetupFailureCount]=[0x4] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsLanguage]=[0x409] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsSkuId]=[0x288] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsSuiteMask]=[0x100] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsProductType]=[0x1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsCompact]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [HostOsWimBoot]=[0x0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SourceOsMajorVersion]=[0x6] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SourceOsMinorVersion]=[0x1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SourceOsBuildNumber]=[0x1DB1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [SourceOsBuildQFE]=[0x5FE0] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [QUADWORD] -> [SetupStartTime]=[0x1d6f4141d07b969] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [WuId]=[3717f6cb-0673-4475-9af8-0612514476eb] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [WebSetupOnlineStoreVersion]=[1.4.1] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [WebSetupInputDefaultLang]=[en-us] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [WebSetupInputDefaultEdition]=[Professional] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [WebSetupInputDefaultArch]=[x64] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [HostOsEditionId]=[Professional] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [HostOsInstallationType]=[Client] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [HostOsSkuName]=[Windows 7 Professional] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [HostOsBranchName]=[win7sp1_gdr] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [SourceOsEditionId]=[Professional] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [STRING] -> [SourceOsLanguage]=[en-US] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Warning MOUPG Finalize: Compat instance not found.
    2021-01-26 13:54:48, Info MOUPG Finalize: Requesting ASIMOV upload.
    2021-01-26 13:54:48, Info MOUPG Finalize: Remapping install error [0x8007042C] -> [0xC1900108] for telemetry.
    2021-01-26 13:54:48, Info MOUPG Finalize: Reporting result value: [0xC1900108]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [Setup360MappedResult]=[0xC1900108] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [Setup360Result]=[0x8007042C] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [Setup360Extended]=[0x90018] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [CUSTOM] -> [WindowsUpdateExit] -> [Web360][73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [CUSTOM] -> [UnexpectedEvent] -> [Web360][73aa9b79-36d4-4d5e-ab13-d81cafac7691][][3717f6cb-0673-4475-9af8-0612514476eb][][Failed][Windows 7 Professional][7601][7][8][0x8007042c][0x90018][19041]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: TraceOneSettingsEvent -> [0x0][1][os=windows;scenarioId=7;platformEdition=Professional;platformInstallationType=Client;sku=48;AppVer=1 0.0.19041.572;appBuildLab=vb_release_svc_prod1][MIGNEOENABLED=False][Web360][73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG Finalize: Retrieving downlevel ticks from registry...
    2021-01-26 13:54:48, Info MOUPG Finalize: Converting [52] downlevel ticks to seconds...
    2021-01-26 13:54:48, Info MOUPG Finalize: Reporting total downlevel time: [260 seconds]
    2021-01-26 13:54:48, Info MOUPG CSetupDiagnostics: Tracing Data [DWORD] -> [Setup360DownlevelTime]=[0x104] [73aa9b79-36d4-4d5e-ab13-d81cafac7691][][][0x7]
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Release Identifier -> [FinalizeExit]
    2021-01-26 13:54:48, Info MOUPG MoSetupPlatform: Releasing Setup Platform object...
    2021-01-26 13:54:49, Info MOUPG MoSetupPlatform: Setup Platform object released!
    2021-01-26 13:54:49, Info MOUPG Finalize: Leaving Execute Method
    2021-01-26 13:54:49, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2004]
    2021-01-26 13:54:49, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2003]
    2021-01-26 13:54:49, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2001]
    2021-01-26 13:54:49, Info MOUPG ProgressHandlerAction: Sending final progress message for action [0].
    2021-01-26 13:54:49, Info MOUPG ProgressHandlerAction FinalUpdate: 0x0, 0x0 / 0x0, 0x0
    2021-01-26 13:54:49, Info MOUPG ProgressHandlerAction: Sending final progress message for action [0].
    2021-01-26 13:54:49, Info MOUPG ProgressHandlerAction FinalUpdate: 0x0, 0x0 / 0x0, 0x0
    2021-01-26 13:54:49, Info MOUPG Signalling actions thread to shut down.
    2021-01-26 13:54:49, Info MOUPG Waiting for actions thread to exit.
    2021-01-26 13:54:49, Info MOUPG Actions thread has exited.
    2021-01-26 13:54:49, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2004]
    2021-01-26 13:54:49, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2000]
    2021-01-26 13:54:49, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x3000]
    2021-01-26 13:54:49, Info MOUPG DlpTask: Leaving Execute Method
    2021-01-26 13:54:49, Info MOUPG SetupNotify: Specifying extended data [0x90018] for error [0x8007042C].
    2021-01-26 13:54:49, Info MOUPG CSetupUIManager: Showing error message
    2021-01-26 13:54:49, Info MOUPG CInstallUI::ShowErrorMessage: Posted MSG_INSTALLUI_SWITCH_TO_ERROR_PAGE
    2021-01-26 13:54:49, Info MOUPG CInstallUI::CInstallUIMessageWindow::SwitchToErrorPage
    2021-01-26 13:54:49, Info MOUPG SetupHost: Reporting error event -> [0x8007042C, 0x90018]
    2021-01-26 13:54:49, Info MOUPG CInstallUI::SwitchToErrorPage
    2021-01-26 13:54:49, Warning MOUPG SetupNotify::ReportEvent - Report ID or Event Reporter not available.
    2021-01-26 13:54:49, Info MOUPG SetupManager: FailureCount = [4]
    2021-01-26 13:54:49, Info MOUPG SetupManager: Requesting cleanup level [0x2] from parent process.
    2021-01-26 13:54:49, Info MOUPG Setup phase change: [SetupPhaseError] -> [SetupPhaseUnpack]
    2021-01-26 13:54:49, Info MOUPG SetupManager: Deleting task: [PreDownload]...
    2021-01-26 13:54:49, Info MOUPG SetupManager: Deleting task: [Exit]...
    2021-01-26 13:54:50, Error MOUPG CSetupManager::Execute(295): Result = 0x8007042C
    2021-01-26 13:54:50, Error MOUPG CSetupHost::Execute(433): Result = 0x8007042C
    2021-01-26 13:54:50, Error MOUPG SetupHost: Diagnostic tool does not exist [C:\$Windows.~WS\Sources\SetupDiag.exe][gle=0x00000002]
    2021-01-26 13:54:50, Error MOUPG CSetupHost::ExecuteDiagnosticAnalysis(1541): Result = 0x80070003[gle=0x00000002]
    2021-01-26 14:32:00, Info MOUPG CInstallUI::ShowExitingSetup: Posted MSG_INSTALLUI_SWITCH_TO_PROGRESS_PAGE
    2021-01-26 14:32:00, Info MOUPG CInstallUI::Quit: Posted MSG_INSTALLUI_FORCE_QUIT
    2021-01-26 14:32:00, Info MOUPG CInstallUI::CInstallUIMessageWindow::SwitchToProgressPage
    2021-01-26 14:32:00, Info MOUPG CInstallUI::SwitchToProgressPage
    2021-01-26 14:32:00, Info MOUPG CInstallUI::CInstallUIMessageWindow::ForceQuit
    2021-01-26 14:32:00, Info MOUPG Force ending Message pump
    2021-01-26 14:32:00, Info MOUPG CInstallUI::ExitInstance
    2021-01-26 14:32:00, Info MOUPG SetupUI: Calling PowerClearRequest with type [0x1]...
    2021-01-26 14:32:00, Info MOUPG SetupUI: Power request cleared!
    2021-01-26 14:32:00, Info MOUPG **************** SetupHost Logging End ****************
      My Computer


  2. Posts : 41,412
    windows 10 professional version 1607 build 14393.969 64 bit
       #2

    1) Please make free backup images and save the images to another disk drive or the cloud:
    Imaging with free Macrium - Windows 7 Help Forums

    2) Upgrade options:

    Windows 10 - Test & Try with No Risk, No Install - Windows 7 Help Forums
    Upgrade to Windows 10 from Windows 7 for Free
    Clean Install Windows 10 Directly without having to Upgrade First
    Upgrade to Windows 10


    3) Run setupdiag > post a share link using one drive, drop box, or google drive
    https://docs.microsoft.com/en-us/win...rade/setupdiag


    4) This is an upgrade checklist: (modified for upgrading 7 to 10)

    Code:
    UPGRADE CHECK LIST:
    Run through this check list before the next upgrade attempt:
    
    1) remove nonessential hardware
    docks
    USB devices
    printers
    headset
    speakers
    joysticks
    projectors
    scanners
    plotters
    portable optical drives (CD, DVD)
    microphones
    cameras
    webcams
    smartphones
    bluetooth devices
    USB drives (other than a windows 10 iso if used for the upgrade)
    USB Wireless Mouse or Keyboard Receiver, USB Wireless Network Card
    secondary monitors
    
    
    2) These should be the only attached devices:
    wired mouse
    wired keyboard
    monitor
    
    Any of these that have been done in the past week are not necessary to repeat:
    
    
    3) open administrative command prompt and type or copy and paste: (repair file system)
    chkdsk /r /v C:
    This may take many hours so plan to run overnight
    Find the chkdsk report in the event viewer using the information in this link and post into the thread:
    https://www.sevenforums.com/tutorials/433-disk-check.html
    https://www.sevenforums.com/tutorials/96938-check-disk-chkdsk-read-event-viewer-log.html
    
    4) open administrative command prompt and copy and paste: (repair operating system)
    sfc /scannow 
    
    When this has completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
    
    5) update windows (have all recommended updates installed) and reboot after updates
    
    6) List and uninstall all non-Microsoft antivirus software
    (This includes always on and manual software.)
    (This includes running the applicable antivirus uninstall tools for any AV that could have been incompletely uninstalled)
    https://www.bitdefender.com/consumer/support/answer/2625/
    (And this includes uninstalling Microsoft Security Essentials (MSE) immediately before the upgrade attempt)
    
    7) List and uninstall all non-Microsoft firewall software
    
    8) List all Microsoft and non-Microsoft drive encryption software. 
    Uninstall all non-Microsoft disk encryption software
    
    9) Run disk cleanup to clean temporary and system files
    https://www.sevenforums.com/tutorials/818-disk-cleanup-open-use.html
    
    10) Create and verify that the drive has > 30 GB free space (At least 25 GB is needed for maintaining certain dump files)
    https://www.sevenforums.com/tutorials/129976-hard-disk-space-free-up-recover.html
    https://www.sevenforums.com/tutorials/274797-disk-management-post-screen-capture-image.html
    
    
    11) Consider placing the computer in clean startup:
    https://www.sevenforums.com/tutorials/179159-troubleshoot-application-conflicts-performing-clean-startup.html
    
    12) Detach all SATA devices other than the disk drive that has the Windows operating system
    (Make sure that the only disk drive that is attached to the computer at the time of the upgrade attempt is the disk drive containing Windows)
    (Other disk drives may be able to be detached by disconnecting cables or if necessary to remove the drive from the computer)
    
    13) Make sure that there is no metered connection:  https://support.microsoft.com/en-us/help/17452/windows-metered-internet-connections-faq
    
    14) Consider making a free backup image:
    https://www.sevenforums.com/tutorials/73828-imaging-free-macrium.html
    https://www.sevenforums.com/tutorials/218920-macrium-reflect-create-bootable-rescue-usb-drive.html
    
    15) Test the drive:
    https://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html
    Crystal Disk standard edition:
    https://crystalmark.info/en/software/crystaldiskinfo/
      My Computer


  3. Posts : 16
    slackware
    Thread Starter
       #3

    sorry it took so long, the computer is slow for some reason. i also thought it was toast for a bit, still not out of the woods. i had tried everything except disk cleanup and using the tool to scan the hard drive. when i set the ahci to ata, it freaked out, blue screened, went into repair mode and froze. it finally went into attempting repairs, failed, and shut off. i changed the ata back to ahci and it booted, although went into the configuring from windows updates. after a half hour of that, it says cleaning up but has been there a while so i'm posting the log here. from what i can read, it's something to do with a token not there. if this damned thing would come back up, i can try it one more time before the clean install, but i'm not putting any money on that. not gonna stop it though, i hate to reinstall all that crap. SetupDiagResults.log
    sfc-scannow.txt
    chkdsk.txt
    system-logs.txt
    setup-logs.txt
      My Computer


  4. Posts : 41,412
    windows 10 professional version 1607 build 14393.969 64 bit
       #4

    1) Find 2 flash drives that you can format (> or = 8 GB)

    2) On a working computer create:

    a) a new bootable windows 10 iso 20H2:
    https://www.microsoft.com/en-us/soft...load/windows10
    Download Windows 10 ISO File
    Download Windows 10 ISO File
    Create Bootable USB Flash Drive to Install Windows 10
    Create Bootable USB Flash Drive to Install Windows 10


    2) bootable Ubuntu flash drive:
    Create a bootable USB stick on Windows | Ubuntu tutorials
    Create a bootable USB stick on Windows | Ubuntu
    Linux to the rescue! How Ubuntu can help a computer in distress | PCWorld


    3) Run the DM log collector:
    BSOD - Posting Instructions
    How to Upload and Post Screenshots and Files at Ten Forums

    4) Run HD Tune (free version) (all drives)
    HD Tune website
    Post images into the thread for results on these tabs:
    a) Health
    b) Benchmark
    c) Full error scan

    5) Run Sea Tools for Windows
    long generic test
    Post an image of the test result into the thread
    SeaTools for Windows |
    Seagate

    How to use SeaTools for Windows | Seagate Support US

    6) Open disk management > by default some columns are compressed > widen each Status and Volume > make sure the contents within the parenthesis are in full view and that none of the characters are cutoff > view disk 0 > widen this row as needed so that all of the characters are in full view > post an image into the thread
    Disk Management - How to Post a Screenshot of

    7) Download and install Minitool Partition Wizard > click launch > post an image of the results into this thread
    https://download.cnet.com/MiniTool-P...-10962200.html
    https://www.partitionwizard.com/part...ion-magic.html

    8) List any AV, Firewall, drive encryption software

    9) Run administrative command prompt:
    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"

    10) Find the new text file on the desktop > post a share link

    11) Run:
    DiskParInfo.bat - Click here to go to the BSOD batch repository to download and run this batch file.

    Upgrade_failure_info.bat - Click here to go to the BSOD batch repository to download and run this batch file.




    Code:
    Error: 0x8007042C - 0x90018
    Code:
    4 KB in bad sectors.
      My Computer


  5. Posts : 16
    slackware
    Thread Starter
       #5

    not that i don't trust you, but after that last scare of almost not getting back into windows after randomly listening to people on the internet, why? what is the reason for all of this, and what is the end result expected to be? then again, i can't turn the seagate utility, when i change to ata, it won't boot.
      My Computer


  6. Posts : 41,412
    windows 10 professional version 1607 build 14393.969 64 bit
       #6

    How come you modified BIOS drive settings?
      My Computer


  7. Posts : 16
    slackware
    Thread Starter
       #7

    the seagate tool readme said it wouldn't work in ahci mode, ide or sata only. the laptop has ata, not sata, so i used that. damn, that first post i made is shit. should've used the code tags.
      My Computer


  8. Posts : 41,412
    windows 10 professional version 1607 build 14393.969 64 bit
       #8

    See if Seagate Dos or bootable work:
    SeaTools | Seagate Support US
    SeaTools for DOS - Hard Drive Diagnostic


    DOS is a legacy product.
      My Computer


  9. Posts : 16
    slackware
    Thread Starter
       #9

    the seagate dos tries to make a bootable usb, the dos made a cd, but i didn't try it in ahci mode, since it said it wouldn't. it's gonna be a while before this upgrade errors out again to retry it. i still don't understand the reason behind all the other crap, like the ubuntu. if it takes ubuntu to make this upgrade work, forget it. i won't use it.
      My Computer


  10. Posts : 41,412
    windows 10 professional version 1607 build 14393.969 64 bit
       #10

    The logs are for troubleshooting.
    Do not post logs if you want to clean install or do everything yourself.
    The Ubuntu can make backing up logs easy when there are problems with booting /Windows.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:00.
Find Us




Windows 10 Forums