Update to 2004 fail in laptop - question about debug

Page 1 of 2 12 LastLast

  1. Posts : 919
    Windows 8.1 Enterprise x64
       #1

    Update to 2004 fail in laptop - question about debug


    One of the laptops that I support (Asus VivoBook E502NA) cannot update from 1909 to 2004 (error code 0xC1900101). Because I have access to the logs, I wanted to ask if I read them correctly? There are entries in the setupact.err file saying that the driver failed to add (Failed to add driver). Should the above error code show attention in logs or something else? The message I quoted above refers to a third-party driver that I cannot delete at the moment
    Logs:
    Google Drive: Sign-in
    Google Drive: Sign-in
      My Computer

  2. dalchina's Avatar
    Posts : 25,054
    Win 10 Pro (1903)
       #2

    Hi, upgrade errors are very hard to resolve. A typical error- and typical of that error number- is driver-related.

    In your case you should at least disable IIS

    (Attaching a zipped version of such files is easier for respondents- smaller download too)

    Try using MS's setupdiag.exe tool
    https://docs.microsoft.com/en-us/win...rade/setupdiag
    Use SetupDiag to diagnose Windows 10 upgrade issues - gHacks Tech News
    Using SetupDiag.exe to Diagnose Windows 10 Upgrade Errors | Windows OS Hub
      My Computers


  3. Posts : 66
    Windows 10
       #3

    Disconnect any external USB hubs.
      My Computers


  4. Posts : 919
    Windows 8.1 Enterprise x64
    Thread Starter
       #4

    Dalchina thanks. Are you saying it's not that easy to diagnose an upgrade problem? And there is nothing in the logs about some problematic drivers? Will I find such information in the logs at all or does the trial and error method remain (although on this laptop I operate on, I can't quite throw away all drivers as well)? For now, I turned off IIS and we will see if the system will update
    RJARRRPCGP I have nothing connected to the USB on this laptop
      My Computer

  5. dalchina's Avatar
    Posts : 25,054
    Win 10 Pro (1903)
       #5

    From the logs, I said
    In your case you should at least disable IISand I confirmed driver migration can be a cause of failure.

    I also suggested you should run setupdiag.exe

    Basics for upgrading:
    - uninstall 3rd party security software
    - ensure you have at least, say, 30Gb spare on C:
    - disconnect any unnecessary peripherals.

    You can try:
    - a clean boot
    - searching the log files noting any fail or error messages, and using a search engine to find related reports
    - downloading the iso file, disconnecting your internet and upgrading without accepting updates.

    See the tutorial on Upgrading to Windows 10- this has a section on preparing to upgrade and resolving upgrade failure with links to a lot more.

    The error message text should tell you at which phase of the upgrade process the failure occurred.
    Appropriate log files are created at each stage. One of the links above gives you information on that.

    There have been threads lasting days with detailed attempts to use logs and resolve upgrade failures. There is little that is directly helpful or diagnostic in the log files.
      My Computers


  6. Posts : 919
    Windows 8.1 Enterprise x64
    Thread Starter
       #6

    Oh, I forgot to mention it. I used this SetupDiag but it did not lead me to solve the problem:
    Logs.zip - Google Drive
      My Computer


  7. dalchina's Avatar
    Posts : 25,054
    Win 10 Pro (1903)
       #7

    You;ve got lots of things to try. I make no promise of a useful outcome.

    Try looking at some of zbook's threads trying to help with upgrade failure.
      My Computers


  8. Posts : 32,878
    windows 10 professional version 1607 build 14393.969 64 bit
       #8

    Code:
    0xC1900101-0x20017

    Please perform the following steps:

    1) Open administrative command prompt and type or copy and paste:
    2) sfc /scannow
    3) dism /online /cleanup-image /scanhealth
    4) dism /online /cleanup-image /restorehealth
    5) sfc /scannow
    6) chkdsk /scan
    7) bcdedit /enum {badmemory}
    8) get-localuser

    9) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

    10) Uninstall ESET using the applicable uninstall tool:
    [KB2289] Uninstall ESET manually using the ESET uninstaller tool

    11) Place the computer in clean boot:
    Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts

    12) Perform an upgrade after posting the above results

    13) For failure to upgrade:
    a) run V2 and DM > upload results directly into this thread
    BSOD - Posting Instructions
    b) run the powershell command below > click ok > post a share link using one drive, drop box, or google drive



    Code:
    function wh   
        {  
            Param ( [parameter (Mandatory = $true)][string]$txt )  
            Write-Host $txt -ForegroundColor Green -BackgroundColor Black -NoNewline  
            ##Example usage wh "Alias for `n Write-Host"  
      
        } ## End function wh  
      
      
    function StartScript   
        {  
            ##Locating Temp Dir and writing Transcript  
            $global:tempDir = [System.IO.Path]::GetTempPath()   
            MD $tempDir\LOGS -EA SilentlyContinue   
            CD $tempDir\LOGS  
            $txtCount = Get-Item $tempDir/LOGS/*.TXT -EA SilentlyContinue  
            if((Get-Host).Version.Major -cge 5) ##WIN7 Not Supported  
                {  
                    if($txtCount.Count -cge 1)   
                    {Start-Transcript -Append -Path $tempDir/LOGS/Event-Search.TXT}   
                    Else{Start-Transcript -Path $tempDir\LOGS\Event-Search.TXT}   
                }  
      
            $global:explore = $tempDir + "LOGS\"  
            $global:Ver = "1.6.3"  
            wh "`nLog Collection... (V$Ver)`n"  
      
            #clearing previous actions  
            Stop-Job *  
      
            #Initialize CheckBox Vars to $True/$False  
                $Global:EventsCollect = $true; $Global:SetupDiagCollect = $true  
                    $Global:UpdatesCollect = $true; $Global:WLANCollect = $true  
                        $Global:PowerCollect = $true; $Global:GPCollect = $true  
                            $Global:miscCollect = $true; $Global:bingCollect = $true  
                                $Global:eventOut = $false        
            #Clear Jobs  
            Stop-Job *  
            Remove-Job *  
                                              
        } ## End function Start-Script  
      
      
    function SetupDiagFunc  
        {  
            wh "`n Grabbing SetupDiag.exe ..."       
            Invoke-WebRequest https://go.microsoft.com/fwlink/?linkid=870142 -OutFile $tempDir\SetupDiag.exe -TimeoutSec 3 -UseBasicParsing  
                #check for successful download  
                if((Get-Item $tempDir\SetupDiag.exe).length -gt 100000)  
                    {  
                      wh "`nSuccessful DL!"  
                      wh "`n Invoking SetupDiag.exe ..."  
                      $SetupDiag = {CMD.EXE /C "%temp%\setupdiag.exe /Verbose /Output:%temp%\SetupDiag-Log.txt"}  
      
                      ## Kick-Off SetupDiagJob  
                      Start-Job -Name SetupDiagJob -ScriptBlock $SetupDiag                     
                      
                    }Else{Write-Host "`nDownload of SetupDiag.exe Failed!" -BackgroundColor RED }  
      
        } ## End Function SetupDiagFunc  
      
      
    function EventSearch  
        {  
        wh "`n Starting EventSearch Job-Function ...`n"  
        ## Gathering Events from System using Get-WinEvent via Job  
        $EventSearchJob =   
            {  
            $evtPaths = Get-Item C:\Windows\System32\Winevt\Logs\*.evtx -Exclude "*PowerShell*",   
                "*known folders*" | Select-Object FullName  
            $i = $evtPaths.Count  
      
            $x = 0 ##For 1st Loop do Until x = i  
            $events = @()  
            $gatherEvents = @()  
            $eventsArray = @()  
            $searchResult = @()  
            $MaxEvents = 99  
      
            #Loading/Gathering Events Loop...  
            do {  
           
                ##Getting Events w/ Get-WinEvent         
                $gatherEvents = Get-WinEvent -Path $evtPaths[$x].FullName -MaxEvents $MaxEvents -EA SilentlyContinue  
                $events = $events + $gatherEvents             
      
                $x++  
                  
                }  
                 Until ($x -eq $i)      
      
            $x = $x +1 ##Total Events Found!  
              
            $eventsLength = $events.Length ##Total events catalogged!  
              
            $xx = 0  
                   
            # Write Event Properties to a row and roll it out - Collapsing Array ...   
            do {  
                   $date = $events[$xx].TimeCreated | Get-Date -Format "yyyyMMdd".ToString() -EA SilentlyContinue ##EA SC for Blank Entries  
                      
                    $eventRow = new-object PSObject -Property @{  
                    Date = $date;  
                    Id = $events[$xx].Id;  
                    Level = $events[$xx].LevelDisplayName;  
                    Provider = $events[$xx].ProviderName;  
                   Message = $events[$xx].Message;  
                    }  
      
                    $cRow = $date + " " + "ID:" +  $events[$xx].Id + " " + "Level:" + $events[$xx].LevelDisplayName + " " + "Provider:" + $events[$xx].ProviderName + " " + "Message:" + $events[$xx].Message   
                    $eventsArray += $cRow  
                   
                    $xx++  
                    $d++  
            }  
            Until ($xx -eq $events.Length)  
     
            ##Looking for patterns error or fail in $eventsArray  
            $search = $eventsArray | Select-String -pattern ("error|fail") 
     
            Return $search ## | Write-Output ##Output for job  
      
            } ## End $EventSearchJob  
      
        Start-Job -Name EventSearchJob -ScriptBlock $EventSearchJob  
      
        } ## End function Event-Search  
      
      
    function writeSearch  ##   
        {  
            ##Event Logs Cont.  
            MD $tempDir\LOGS\EVTX\ -EA SilentlyContinue 
     
            ##output to file  
            $search | Group-Object | Sort-Object Count -Descending | Format-Table Count, Name -Wrap > TOP-ERRORS.TXT  
            $search > $tempDir\LOGS\SEARCH.TXT  
      
        if($Global:eventOut -eq $True)  
            {  
            $search | Group-Object | Sort-Object Count -Descending |   
                Select-Object -Property Count, Name | Out-GridView -Title "Top `"Errors`" via EVTX - V-$Ver"  
            }  
      
            wh "`n Collecting Matching EVTX Entries ...`n"     
            #Collecting all prev matching EVTX  
            #$evtx = Get-ChildItem C:\Windows\System32\Winevt\Logs\*.evtx  
            $evv = 0  
                      
               $providerName =   
                   (($search | Select-String "Provider:.*Message:").Matches.Value -Replace   
                          " Message:", "" -Replace "Provider:", "" | Group-Object ).Name  
                  
                #Converting Provider Name to Log Name                 
                $providerName = (($providerName | ForEach-Object {Get-WinEvent -ProviderName $_ -MaxEvents 1 -EA SilentlyContinue}).LogName | Group-Object).Name     
                   $providerName = $providerName -replace "Microsoft.", ""  
                      $providerName = $providerName -replace "Windows.", ""  
                         $providerName = $providerName -replace "`/.*$", ""  
                               
                               
                             $evtx = $providerName | foreach{Get-ChildItem "C:\Windows\System32\winevt\logs\*$_*"}  
      
                    Do{  
                        COPY $evtx[$evv].PSPath $tempDir\LOGS\EVTX\ 
                           $evv++  
                      }  
                      Until($evv -eq $evtx.Count)  
      
        } #End function writeSearch  
      
      
    function GetUpdates  
        {  
            wh "`n Starting Get-WindowsUpdateLog Job-Function ...`n"  
            $updateJob = {get-WindowsUpdateLog}  
             
            if((Get-Host).Version.Major -cge 5) ##Modern Gatherer  
            {  
                Start-Job -Name GetUpdates -ScriptBlock $updateJob  
            }  
              
            ##Legacy Gatherer  
            CP C:\Windows\WindowsUpdate.log $tempDir\LOGS\WindowsUpdate.log  
      
            ##Installed-Updates/Packages 
            Get-WmiObject win32_quickfixengineering > $tempDir\LOGS\Installed_Updates.TXT  
            Get-WmiObject Win32_OperatingSystemQFE >> $tempDir\LOGS\Installed_Updates.TXT  
        DISM /Online /Get-Packages /Format:Table >> $tempDir\LOGS\Installed_Updates.TXT 
      
        } ## End function Get-Updates  
      
           
    function PrinterCheck  
        {  
            wh "`n Getting Printer Information ..."  
            get-printer | ft Name, ComputerName, Type, DriverName, PortName, Datatype, Location, DriverName > $tempDir\LOGS\Printers.TXT  
            get-printerDriver | fl >> $tempDir\LOGS\Printers.TXT  
            Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers" | Out-File $tempDir\LOGS\Printers.TXT -Append  
            Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers" | Out-File $tempDir\LOGS\Printers.TXT -Append  
            Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors" | Out-File $tempDir\LOGS\Printers.TXT -Append  
            write-output "## CBS ntprint CHECK ##" >> $tempDir\LOGS\Printers.TXT  
            $cbsCheck = (Get-ChildItem C:\Windows\Logs\CBS\*cbs* -Recurse | select-string -Pattern "E_INVALIDARG in eventsXml.*Microsoft-Windows-PrintService")  
            if($cbsCheck.Count -eq 0){Write-Output "## NO MATCHES IN CBS ##" >> $tempDir\LOGS\Printers.TXT} Else{$cbsCheck | Group-Object  >> $tempDir\LOGS\Printers.TXT}  
            write-output "## ntprint.dll CHECK ##" >> $tempDir\LOGS\Printers.TXT  
            (Get-ChildItem C:\Windows\System32\ntprint.dll).VersionInfo | ft -AutoSize >> $tempDir\LOGS\Printers.TXT  
            (Get-ChildItem C:\Windows\SysWOW64\ntprint.dll).VersionInfo | ft -AutoSize >> $tempDir\LOGS\Printers.TXT  
      
        } ## End function PrinterCheck  
      
      
    function UpdateHelper  
        {  
        if((Get-Host).Version.Major -cge 5)  
            {  
                $winupdatelog = get-item $tempDir\LOGS\windows-update.log    ##WIN-10 File  
                MD $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue | Out-Null  
                CP C:\Windows\Logs\WindowsUpdate\*.etl $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue  
            }  
                Else{$winupdatelog = get-item $tempDir\LOGS\windowsupdate.log} ##LEGACY File  
      
        $updateError = ($winupdatelog | select-string -pattern "error.*0x........");  
        $updateErrorSplit = $updateError -Split " "  
        $updateErrorCount = (($updateErrorSplit | select-string -pattern "0x........") -Replace "[(),'`.:]", "" -Replace "hr=", "");  
      
        $updateErrorCount | Group-Object | Sort-Object Count -Descending | Format-Table Count, Name | Out-File $tempDir\LOGS\UPDATE-ERRORS.TXT -Width 999  
        $updateError >> UPDATE-ERRORS.TXT  
        if($updateError.length -eq 0){"No `"error.*0x........`" patterns Found in Windows-Update.log" | Out-File $tempDir\LOGS\UPDATE-ERRORS.TXT}  
      
        ($winupdatelog | Select-String "KB\d\d\d\d\d\d\d" | Select-string "fail") | Out-file $tempDir\LOGS\UPDATE-ERRORS.TXT -Append -width 999  
      
        } ## End function UpdateHelper  
      
      
    function getProcesses  
        {  
        wh "`nGetting Active Process ...`n"   
        Get-Process > $tempDir\LOGS\Running-Processes.TXT  
        CMD.EXE /C "tasklist /svc" | Out-File -Append  $tempDir\LOGS\Running-Processes.TXT  
          
        } ## End function getProcesses  
      
      
    function GetApps  
        {  
        wh "`n Getting List of Installed Apps...`n"  
        Get-WmiObject -Class Win32_Product | Format-Table -Property Name, Version, Vendor > $tempDir\LOGS\Installed-Apps.TXT  
        Get-AppxPackage | ft Name, Version, InstallLocation, IspArtiallyStaged, SignatureKind, Status >> $tempDir\LOGS\Installed-Apps.TXT  
          
        } ## End function GetApps  
      
      
    function SetupLogs  
        {  
        wh "`nGetting Windows Setup Logs Independent of SetupDiage.exe...`n"  
            MD $tempDir\LOGS\SETUP\ -EA SilentlyContinue  
        dir C:\ > $tempDir\LOGS\Dir_Structure.txt  
          
        ## Main Setup Collection  
        if($env:SystemDrive -eq 'C:') ##Verify SystemDrive  
        {  
            $SetupPaths = @()  
      
            $locations = @(  
                'C:\GetCurrent',  
                'C:\$Reset',  
                'C:\$SysReset',  
                'C:\$Windows.~BT',  
                'C:\$Windows.~WS',  
                'C:\Windows\Logs\',  
                'C:\Windows\Panther\',  
                'C:\Windows\inf\',  
                'C:\Windows\System32\LogFiles\',  
                'C:\Windows\System32\SysPrep\',  
                'C:\Windows10Upgrade',  
                'C:\Windows.old\Windows\Panther')  
      
            for($i = 0; $locations.count -gt $i; $i++)  
            {   
                if((get-item $locations[$i] -Force -EA SilentlyContinue).length -gt 0) ##Null Path Check -Force for Hidden  
                {  
                    CD $locations[$i]  
                    ##Search includes setuperr/setupact only  
                    $SetupPaths += Get-ChildItem * -Force -Recurse -Include setuperr.log, setupact.log, miglog.xml, *APPRAISER_Humanreadable.xml -EA SilentlyContinue      
                }  
            }  
      
            $cleanPaths = @()  
      
            for($i = 0; $SetupPaths.count -gt $i; $i++)  
            {  
                $cleanPaths += $SetupPaths[$i].PSParentPath.ToString() -replace "Microsoft\.PowerShell\.Core\\FileSystem\:\:C\:\\", ""  
            }  
      
            CD $tempDir\LOGS\SETUP\  
            MD $cleanPaths -Force  
            CD $tempDir\LOGS\  
      
            for($i = 0; $SetupPaths.count -gt $i; $i++)  
            {  
                $destPath = "$tempDir\LOGS\SETUP\" + $cleanPaths[$i]  
                $copyPathLog = ($SetupPaths[$i].ToString())  
                  
                Copy  $copyPathLog -Destination $destPath  
            }  
          
        }Else{Write-Host "`nSystem Drive is not C:... Setup Collection Aborted!`n"}  
        ## End Main Setup Collection  
          
              
            ## Setup Reg Output      
            Get-ChildItem HKLM:\SYSTEM\SETUP\ | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT  
            Get-ChildItem HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\OOBE\Me* -recurse -EA SilentlyContinue | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT -Append  
            Get-Childitem HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT -Append  
      
            ## SetupAct String Search  
      
      
              
             $setupRegx = @("MOUPG SetupHost..Initialize:",  
                            "============================",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG  SetupHost..Initialize. CmdLine"),  
                            "",  
                            "MOUPG Setup build & Host OS Build:",  
                            "==================================",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG  SetupHost..Setup build"),  
                            "...",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG      Host OS"),  
                            "",  
                            "Watson Parameters (4&5):",  
                            "=======================",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "Watson Bucketing Parameters\[[4-5]\]" ),  
                            "",  
                            "\[0x........\]Error:",  
                            "==================",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "\[0x........\]\[0x.....\]"),  
                            "",  
                            "`"FATAL`":",  
                            "======",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "FATAL" | Select-String -NotMatch "FatalExecutionEngineError" | Select-String -NotMatch "non-fatal"),  
                            "",  
                            "`"Error   `":",  
                            "===========",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "Error   "),  
                            "",  
                            "MIGRATE.*DATA:",  
                            "==============",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MIGRATE.*DATA"),  
                            ""             
                            )  
                $q=0  
                Do {$setupRegx[$q] | Out-File $tempDir\LOGS\SETUP\SetupAct-Regex.TXT -Append -Width 999 ##spool out results  
                                      $q++                    
                                                }Until($q -eq $setupRegx.Count)  
      
        } ## End function SetupLogs  
      
      
    function powerCFGInfo  
        {  
        MD $tempDir\LOGS\POWER\ -EA SilentlyContinue  | Out-Null  
        wh "`n Grabbing PowerCFG, Sleep & Battery Info ...`n"  
          
        ("`n" + "Available Sleep States (/A): `r" + "`n" +"============================`r" + "`r").ToString() | Out-File -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        powercfg /a | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
        ("`n" + "-DeviceQuery Wake_Armed: `r" + "`n" +"========================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        powercfg -devicequery wake_armed  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
        ("`n" + "Last Wake (-lastwake):  `r" + "`n" +"=====================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        powercfg -lastwake  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        ("`n`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
        ("`n" + "-Requests: `r" + "`n" +"==========`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        powercfg -requests  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
        $powerList = powercfg -list  
        $powerList | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        $powerActive = $powerList | select-string "\*" | powercfg /QH "$_"   
        ("`n`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
        ("`n" + "Active Power Scheme Details: `r" + "`n" +"============================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        $powerActive | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
      
        if((Get-Host).Version.Major -cge 5) ##WIN7 Does not Support powercfg /battery /sleepstudy  
             {   
               $ifbattery = Get-WmiObject win32_battery  
               if ( $ifbattery.__SERVER.count -cge 1 ) { CMD.EXE /C "powercfg /batteryreport /output %temp%\LOGS\POWER\battery-report.html" }  
               CMD.EXE /C "powercfg /sleepstudy /output %temp%\LOGS\POWER\sleepstudy-report.html"  
             }  
               CMD.EXE /C "powercfg /ENERGY /duration 10 /output %temp%\LOGS\POWER\energy-report.html"         
          
        } ## End function powerCFGInfo  
      
      
    function sysProductCheck  
        {  
        wh "`n Getting SystemProductName ...`n"  
        ##SystemInformation Reg   
        reg query HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SystemInformation\ /v SystemProductName  > $tempDir\LOGS\REG_SystemProductName.TXT   
        Get-WmiObject Win32_ComputerSystem > $tempDir\LOGS\WMI_Object_System.TXT  
        Get-WmiObject Win32_ComputerSystemProduct >> $tempDir\LOGS\WMI_Object_System.TXT  
          
        } ## End functions sysProductCheck  
      
      
    function showWLAN  
        {  
        wh "Generating NETSH WLAN Report...`n"  
      
        $showWLANjob = {  
                        CMD.EXE /c "netsh wlan show networks mode=ssid > %temp%\LOGS\Network\wlan.txt"  
                        CMD.EXE /c "netsh wlan show networks mode=bssid >> %temp%\LOGS\Network\wlan.txt"  
                        CMD.EXE /c "netsh winhttp show proxy > %temp%\LOGS\Network\proxy.txt"  
                        CMD.EXE /c "netsh wlan show wlanreport & COPY C:\ProgramData\Microsoft\Windows\wlanReport\wlan-report-latest.html %temp%\LOGS\Network\wlan-report-latest.html"   
                        ##WIN7 Does not Support netsh wlanreport                                                    
                        }   
      
        Start-Job -Name showWLAN -ScriptBlock $showWLANjob  
      
        } ## End function sysProductCheck  
      
      
    function getGPRESULT  
        {  
        wh "`nGetting GPRESULT...`n"  
        CMD.EXE /C "GPRESULT /V > %temp%\LOGS\GPRESULT.TXT"  
          
        } ## End function getGPRESULT  
      
      
    function reservedCheck  
        {       
             
        $reservedJob =   
            {  
            $vol = (mountvol /L | select-string -Pattern "\\\\")  
            $volstring = "mountvol y:" + $vol[0]  
            CMD.EXE /C $volstring  
          
            SLEEP 2  
      
            CMD.EXE /C "CHKDSK y: > %temp%\LOGS\SystemReserved.TXT"  
          
            SLEEP 2 # Pause after drive dismount  
          
            CMD.EXE /C "mountvol y: /D"  
            }  
      
        Start-Job -Name reservedJob -ScriptBlock $reservedJob  
          
        } ## End function reservedCheck  
      
      
    function fltmcCheck  
        {  
        wh "`n Getting fltmc Filters ...`n"  
        CMD.EXE /c "fltmc filters > %temp%\LOGS\fltmc_filters.TXT"  
          
        } ## End function fltmcCheck  
      
      
    function getDXDiag  
        {  
        wh "`n Grabbing DXDiag Info...`n"  
        C:\Windows\System32\dxdiag /x $explore\DxDiag  
          
        } ## End function getDXDiag  
      
      
    function getMSINFO  
        {  
        wh "`n Gathering MSINFO32 ...`n"  
        ## check if msinfo is already gathering - if so stop  
        If((get-process | select-string -Pattern "msinfo").Pattern -eq "msinfo")  
        {Stop-Process -ProcessName msinfo32}  
      
            C:\Windows\System32\msinfo32.exe /nfo $tempDir/LOGS/MSINFO32.NFO  
                     
        } ## End function getMSINFO  
      
      
    function getAV  
        {  
         if((Get-Host).Version.Major -cge 5) ##Modern OS Only  
            {  
            wh "`n Grab root\SecurityCenter2 AntivirusProduct ...`n"  
            $avPath = (Get-WmiObject -Namespace root\SecurityCenter2 -Class AntivirusProduct) | % {$_.pathtoSignedProductEXE}  
            "AV Info" + "`n========" | Out-File $tempDir/LOGS/SecurityProductInformation.TXT 
        $avPath | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append  
            if($avPath[0] -match "exe")  
                {   
                    $path = (Get-Item $avPath[0]).PSParentPath  
                    Get-Item $path/*.ini | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append  
                    Get-Content $path/*.ini | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append             
                }  
                Get-ChildItem "HKLM:\SOFTWARE\Policies\Microsoft\Windows Defender\" -recurse -EA SilentlyContinue | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append      
            }  
        } ## End function getAV  
      
      
    function getDrivers  
        {  
        wh "`n Grabbing Driver listing via DISM.EXE ...`n"  
            $drivers = cmd.exe /C "dism /online /get-drivers /format:table"  
            $drivers += cmd.exe /C "dism /online /get-drivers /all /format:table"  
            $drivers | Out-File $tempDir/LOGS/DISM-Get-Drivers.TXT  
        wh "`n Done!`n"  
        } ## End Function getDrivers  
      
      
    function getMISCLogs  
        {  
            wh "`nCopying misc. logs ...`n"   
            MD $tempDir\LOGS\WER\ -EA SilentlyContinue   
            MD $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue  
            CP "C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\*" $tempDir\LOGS\WER\ -Recurse -EA SilentlyContinue  
            CP "C:\Windows\Logs\CBS\*cbs*" $tempDir\LOGS\Windows\Logs\  
            CP "C:\Windows\Logs\DISM\*dism*" $TempDir\LOGS\Windows\Logs\  
            CP "C:\Windows\Logs\WindowsUpdate\*" $TempDir\LOGS\Windows\Logs\WindowsUpdate\  
      
                
            #DMP Collect  
            $dmp = @()  
            $dmp += Get-ChildItem C:\Windows\*.dmp   
            $dmp += (Get-ChildItem C:\Windows\LiveKernelReports\*.dmp -Recurse -EA SilentlyContinue)  
            $dmp += (Get-ChildItem C:\Windows\Minidump\*.dmp -Recurse -EA SilentlyContinue)  
            #Validate empty array  
            if($dmp.length -ne 0)  
                {  
                $dd=0  
                      Do{       
                            If($dmp[$dd].length -lt 2000000)  
                                { $destPath = $dmp[$dd].PSParentPath.Replace('C:\', '').Replace('Microsoft.PowerShell.Core\FileSystem::', '')  
                                    MD $destPath -EA SilentlyContinue 
                                        COPY -Path $dmp[$dd].PSPath -Destination $destPath }  
                            $dd++  
                        }  
                        Until($dd -eq $dmp.Count)  
                }  
     
             #disk info 
             "`nGet-Disk:`n=========" > $tempDir\LOGS\Disk-Info.TXT  
             Get-Disk |fl >> $tempDir\LOGS\Disk-Info.TXT 
             "`nGet-Partition:`n==============" >> $tempDir\LOGS\Disk-Info.TXT  
             Get-Partition >> $tempDir\LOGS\Disk-Info.TXT 
             Manage-bde -protectors -get C: >> $tempDir\LOGS\Disk-Info.TXT 
             "`nIO Fail Search:`n===============`n" >> $tempDir\LOGS\Disk-Info.TXT 
             $search | Select-String ".*io.fail.*" | Select-String -NotMatch '0, 0, 0, 0' >> $tempDir\LOGS\Disk-Info.TXT        
      
        } ## End function getMISCLogs  
      
      
    function bingCollect  
        {  
            ##O365 Firewall Check & Bing.com diagnostics.asp  
            ##URIs based on Article:   
            ##https://support.office.com/en-us/article/Network-requests-in-Office-365-ProPlus-and-Mobile-eb73fcd1-ca88-4d02-a74b-2dd3a9f3364d  
                    
            MD $TempDir\LOGS\Network\ -EA SilentlyContinue  
      
            wh "Performing Bing & O365 URI Check ... `n"  
      
      
                  $bingCheck = (Invoke-WebRequest -Uri https://www.bing.com/fdv2/diagnostics.aspx -UseBasicParsing)   
                  $bingCheck | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT  
                     
                  $URIs = @('api.login.microsoftonline.com',    #0  Standard Reply = 403  
                  'api.passwordreset.microsoftonline.com',      #1  Standard Reply = 200  
                  'becws.microsoftonline.com',                  #2  Standard Reply = 403  
                  'clientconfig.microsoftonline-p.net',         #3  Standard Reply = 404  
                  'companymanager.microsoftonline.com',         #4  Standard Reply = 403  
                  'device.login.microsoftonline.com',           #5  Standard Reply = 200  
                  'graph.microsoft.com',                        #6  Standard Reply = 404  
                  'hip.microsoftonline-p.net',                  #7  Standard Reply = 404   
                  'hipservice.microsoftonline.com',             #8  Standard Reply = 404  
                  'login.microsoft.com',                        #9  Standard Reply = 200  
                  'login.microsoftonline.com',                  #10 Standard Reply = 200  
                  'logincert.microsoftonline.com',              #11 Standard Reply = 200   
                  'loginex.microsoftonline.com',                #12 Standard Reply = 200  
                  'login-us.microsoftonline.com',               #13 Standard Reply = 200  
                  'login.microsoftonline-p.com',                #14 Standard Reply = 200  
                  'login.windows.net',                          #15 Standard Reply = 200  
                  'nexus.microsoftonline-p.com',                #16 Standard Reply = 403  
                  'passwordreset.microsoftonline.com',          #17 Standard Reply = 200  
                  'provisioningapi.microsoftonline.com',        #18 Standard Reply = 403  
                  'stamp2.login.microsoftonline.com',           #19 Standard Reply = 200  
                  'ccs.login.microsoftonline.com',              #20 Standard Reply = 401  
                  'ccs-sdf.login.microsoftonline.com',          #21 Standard Reply = 401  
                  'accounts.accesscontrol.windows.net',         #22 Standard Reply = 200  
                  'secure.aadcdn.microsoftonline-p.com',        #23 Standard Reply = 400  
                  'windows.net',                                #24 Standard Reply = 200  
                  'phonefactor.net',                            #25 Standard Reply = 200  
                  'account.activedirectory.windowsazure.com',   #26 Standard Reply = 404  
                  'secure.aadcdn.microsoftonline-p.com',        #27 Standard Reply = 400  
                  'login.windows.net',                          #28 Standard Reply = 200  
                  'provisioningapi.microsoftonline.com',        #29 Standard Reply = 403  
                  'mscrl.microsoft.com',                        #30 Standard Reply = 400  
                  'secure.aadcdn.microsoftonline-p.com',        #31 Standard Reply = 400  
                  'windowsupdate.microsoft.com',                #32 Standard Reply = 200  
                  'update.microsoft.com',                       #33 Standard Reply = 200  
                  'au.download.windowsupdate.com',              #34 Standard Reply = 200  
                  'download.windowsupdate.com',                 #35 Standard Reply = 200  
                  'download.microsoft.com',                     #36 Standard Reply = 200  
                  'tlu.dl.delivery.mp.microsoft.com');          #37 Standard Reply = 403  
              
                     
                  $count = 0;  
                  $queryResult [email protected]{};  
                     
                  Write-Host "Checking URIs .." -NoNewline  
                     
                  Do {           
                          Try{  
                          $queryResult[$count] = (Invoke-WebRequest -Uri ("http:`/`/" + $URIs[$count]) -Method Head -UseBasicParsing -TimeoutSec 2).RawContent  
                             }Catch{ $catch = $_ }  
                     
                              if($queryResult[$count].Count -eq 0)  
                                      {$queryResult[$count] = ($catch[$catch.count -1].ToString()).Replace("`n", " ")}                                     
                          Write-Host "." -NoNewline           
                          $count++         
                      }Until ($count -eq ($URIs.Count));                            
                  Write-Host "."  
                      
                      Get-Date | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
                      $queryResult | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
                        
            Write-Host " Bing Check", `n, "==========" | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
            
                  wh "`n`n`n`URL Check Finished...`n"   
        }  
      
      
    function smbConfig  
    {  
      
        $CMDs =  
        {   cmd.exe /c "net config server"    
            cmd.exe /c "net config workstation"  
            Get-SmbClientNetworkInterface  
            Get-SmbServerConfiguration  
            Get-SmbClientConfiguration  
            Get-ChildItem "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer"   
            Get-NetAdapterAdvancedProperty | ft }  
      
        ForEach-Object{Invoke-Command $CMDs | Out-File $TempDir\LOGS\NETWORK\$env:COMPUTERNAME-SMB-Config.TXT -Append}  
      
        $share = Get-SmbShare  
      
        ForEach-Object{Get-SmbShareAccess $share.Name | ft  | Out-File $tempDir\LOGS\NETWORK\$env:COMPUTERNAME-SMB-Config.TXT -Append}  
      
    } ## End Function smbConfig  
      
      
    function regLang  
        {       
            DISM.EXE /Online /Get-Intl  | Out-File $tempDir\LOGS\Reg-Lang.TXT  
            "`n","Get-WinUserLanguageList","=======================" | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
            Get-WinUserLanguageList     | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
            "`n","Get-WinLanguageBarOption","========================" | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
            Get-WinLanguageBarOption    | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
        }  
      
      
    function autoRotate  
        {  
            Get-ChildItem HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\Auto* | Out-File $tempDir\LOGS\AutoRotate.TXT  
        }  
      
      
    function checkBoxes  
       {  
            Add-Type -AssemblyName System.Windows.Forms  
            Add-Type -AssemblyName System.Drawing  
      
            $Global:form = New-Object System.Windows.Forms.Form  
            $Global:form.Text = "LOGS-V$ver"  
            $Global:form.Size = New-Object System.Drawing.Size(300,400)  
            $Global:form.StartPosition = 'CenterScreen'  
      
            $OKButton = New-Object System.Windows.Forms.Button  
            $OKButton.Location = New-Object System.Drawing.Point(100,300)  
            $OKButton.Size = New-Object System.Drawing.Size(75,23)  
            $OKButton.Text = 'OK'  
            $OKButton.DialogResult = [System.Windows.Forms.DialogResult]::OK  
            $Global:form.AcceptButton = $OKButton  
            $Global:form.Controls.Add($OKButton)  
             
            $Global:form.ControlBox = $false  
              
                $Global:boxNum = 1  
                $Global:checkBox = @{} #hash for $checkBox  
                $tag = @{} #hash for $label  
                $Global:Box = @{}  
      
                function createCheckBox   
                    {  
                        Param ( [parameter (Mandatory = $true)][string]$name,  
                                [parameter (Mandatory = $true)][string]$label )  
                          
                        $drawingPoint = (50 + ($boxNum *25))  
      
                        $Global:checkBox[$boxNum] = New-Object System.Windows.Forms.CheckBox  
                        $Global:checkBox[$boxNum].Location = New-Object System.Drawing.Point(10,$drawingPoint)  
                        $Global:checkBox[$boxNum].Size = New-Object System.Drawing.Size(15,15)  
                        $Global:checkBox[$boxNum].Text = ''  
                        $Global:checkBox[$boxNum].Checked = $true  
                        $Global:form.Controls.Add($checkBox[$boxNum])  
                        #SetupDiag Label  
                        $tag[$boxNum] = New-Object System.Windows.Forms.Label  
                        $tag[$boxNum].Location = New-Object System.Drawing.Point(40,$drawingPoint)  
                        $tag[$boxNum].Size = New-Object System.Drawing.Size(280,20)  
                        $tag[$boxNum].Text = "$label"  
                        $Global:form.Controls.Add($tag[$boxNum])  
      
                        $Global:boxNum ++  
                      
                    } #End nested function createCheckBox   
                
                createCheckBox -name "EV" -label "EventSearch EventLog Helper"       #1  
                createCheckBox -name "SD" -label "SetupDiag.EXE Setup Diagnostics"   #2  
                createCheckBox -name "WU" -label "Get-WindowsUpdateLog Collection"   #3  
                createCheckBox -name "IP" -label "Network Information"               #4  
                createCheckBox -name "PW" -label "POWERCFG. Sleep & Battery Info"    #5  
                createCheckBox -name "GP" -label "GPResult Info"                     #6  
                createCheckBox -name "MS" -label "General Machine Info"              #7  
                createCheckBox -name "EO" -label "EventSearch Out-GridView"          #8            
                     
                #Checkbox State Changes               
                $Global:checkBox[1].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[1].checked -eq $True){ $Global:EventsCollect = $true ; Write-Host "." -nonewline} Else{ $Global:EventsCollect = $false }  
                                  
                        })             
                $Global:checkBox[2].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[2].checked -eq $True){ $Global:SetupDiagCollect = $true ; Write-Host "." -nonewline} Else{ $Global:SetupDiagCollect = $false }  
                                  
                        })  
                $Global:checkBox[3].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[3].checked -eq $True){ $Global:UpdatesCollect = $true ; Write-Host "." -nonewline} Else{ $Global:UpdatesCollect = $false }  
                                  
                        })  
                $Global:checkBox[4].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[4].checked -eq $True){ $Global:WLANCollect = $true ; Write-Host "." -nonewline} Else{ $Global:WLANCollect = $false }  
                                  
                        })  
      
                $Global:checkBox[5].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[5].checked -eq $True){ $Global:PowerCollect = $true ; Write-Host "." -nonewline} Else{ $Global:PowerCollect = $false }  
                                  
                        })  
                $Global:checkBox[6].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[6].checked -eq $True){ $Global:GPCollect = $true ; Write-Host "." -nonewline} Else{ $Global:GPCollect = $false }  
                                  
                        })  
                $Global:checkBox[7].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[7].checked -eq $True){ $Global:miscCollect = $true ; Write-Host "." -nonewline} Else{ $Global:miscCollect = $false }  
                                  
                        })  
      
                 $Global:checkBox[8].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[8].checked -eq $True){ $Global:eventOut = $true ; $Global:checkBox[1].checked = $true; Write-Host "x" -nonewline} Else{ $Global:eventOut = $false }  
                                  
                        })  
                                               
            $Global:checkBox[8].Checked = $false  
            $mainText = New-Object System.Windows.Forms.Label  
            $mainText.Location = New-Object System.Drawing.Point(62,30)  
            $mainText.Size = New-Object System.Drawing.Size(260,20)  
            $mainText.Text = 'Choose which logs to collect:'  
            $Global:form.Controls.Add($mainText)  
            $result = $Global:form.ShowDialog()  
            SLEEP 1  #testing Topmost lag  
            $Global:form.Topmost = $true  
      
            #OK Button ...   
            if ($result -eq [System.Windows.Forms.DialogResult]::OK)  
            {  
                $x = $textBox.Text  
                $x  
            }       
      
        } #End function checkBoxes  
      
      
    Function werHint  
    {  
        $WERs = Get-ChildItem $tempDir\LOGS\WER\*.wer -Recurse  
      
        $WERArray = @()  
      
        $Date = $WERs | Select-String -pattern "eventtime=" | % {$_ -Replace("C:.*EventTime=", "")}  
        $eventType = $WERs | Select-String -pattern "EventType=" | % {$_ -Replace("C:.*EventType=", "")}  
        $Sig0Nam = $WERs | Select-String -pattern "Sig\[0\].Name" | % {$_ -Replace("C:.*Sig\[0\].Name=", "")}  
        $Sig0Val = $WERs | Select-String -pattern "Sig\[0\].Value" | % {$_ -Replace("C:.*Sig\[0\].Value=", "")}  
        $Sig3 = $WERs | Select-String -pattern "Sig\[3\].Value" | % {$_ -Replace("C:.*Sig\[3\].Value=", "")}  
        $Sig3 = $WERs | Select-String -pattern "Sig\[3\].Value" | % {$_ -Replace("C:.*Sig\[3\].Value=", "")}  
        $Sig4 = $WERs | Select-String -pattern "Sig\[4\].Value" | % {$_ -Replace("C:.*Sig\[4\].Value=", "")}  
      
        #ConvertDateTime  
        $epoch = [datetime]"01/01/1601 00:00"  
        $date = $date | foreach{$epoch.AddSeconds($_/10000000)}   
        $convertedDate = foreach($Date in $Date) {Get-Date $Date -Format G}  
      
        $WERarray = 0..($convertedDate.Length -1) | Select-Object @{n="Id";e={$_}},   
            @{n="Date";e={$convertedDate[$_]}}, @{n="EventType";e={$eventType[$_]}},  
                @{n="S0-Name";e={$Sig0Nam[$_]}}, @{n="S0-Value";e={$Sig0Val[$_]}}, @{n="S3";e={$Sig3[$_]}},   
                    @{n="S4";e={$Sig4[$_]}}  
      
        $WERArray |Sort-Object -Descending Date | ft -autosize Date, EventType, S0-Name, S0-Value, S3, S4  |   
            Out-File $tempDir\LOGS\WER-SUMMARY.TXT -Width 500  
      
    } ## End Function werHint  
      
      
      
    ### FUNCTIONS_INIT ###   
      
            $Script:Cancel = @{}  
      
            StartScript #function  
            checkBoxes  
              
            ## SetupDiagCollect   #2  
            if($Global:SetupDiagCollect -eq $True)  
                {  
                SetupDiagFunc #function & job   
                wh "...`n"  
                }  
            ## EventSearch         #1  
            if($Global:EventsCollect -eq $True)  
                {  
                EventSearch #function & job  
                wh "...`n"  
                }  
      
            ## Get-WindowsUpdate   #3  
            if($Global:UpdatesCollect -eq $True)  
                {  
                GetUpdates #function & job  
                wh "...`n`n"  
                }  
      
            ## WLAN/Wifi Collect    #4  
            if($Global:WLANCollect -eq $True)      
                {  
                bingCollect #function  
                wh "...`n"  
                showWLAN #function & job   
                wh "...`n"  
                smbConfig #function  
                }  
      
            ## Power/Battery Collect:#5  
            if($Global:PowerCollect -eq $True)  
                {  
                powerCFGInfo #function - make job takes a min  
                wh "...`n"  
                }  
      
            ## GPRESULT Collection:  #6  
            if($Global:GPCollect -eq $True)  
                {  
                getGPRESULT #function  
                wh "...`n"  
                }  
      
            ## Misc Logs Collection: #7        
            if($Global:miscCollect -eq $True)  
                {  
                getMSINFO #function & job  
                    wh "...`n"  
                PrinterCheck #function  
                    wh "...`n"  
                getProcesses #function  
                    wh "...`n"  
                getApps #function - make job - takes a min  
                    wh "...`n"  
                SetupLogs #function  
                    wh "...`n"       
                sysProductCheck #function  
                    wh "...`n"                 
                reservedCheck #function  
                    wh "...`n"  
                fltmcCheck #function  
                    wh "...`n"  
                getDXDiag #function  
                    wh "...`n"  
                regLang #function  
                    wh "...`n"  
                autoRotate #function  
                getMISCLogs #function  
                    wh "...`n"  
                getDrivers #function  
                    wh "...`n"   
                getAV #function  
                    wh "...`n"            
                 }  
            
      
    #### RECEIVING JOBS SECTION ###...   
      
            #EventSearchJob  
            if($Global:EventsCollect -eq $True)  
            {          
                wh "`nWaiting for EventSearchJob to complete...`n"  
      
                Receive-Job -Name EventSearchJob -OutVariable eventSearch -Wait   
                $search = $eventSearch.Line  
            }  
      
      
            if($Global:SetupDiagCollect -eq $True)  
            {  
                #SetupDiagJob - Receive-Job  
                $stamp = (Get-Date -format "hh:mm tt")  
                wh "`nWaiting for SetupDiagJob to complete..."  
                wh "`nTime Stamp: $stamp"  
                wh "`nThis can take up to 10 minutes ..."  
      
                Do{  
                  SLEEP 15  
                    wh "."  
                    if((Get-Job -name SetupDiagJob).State -eq "Completed")  
                        { Receive-Job -Name SetupDiagJob  
                               wh "`nSetupDiag Completed!"                         
                            Break                      }  
                                    }Until($Cancel.SetupDiag -eq $True)  
                wh `n  
                                                   
                #Receive file and copy  
                Receive-Job -Name SetupDiagJob -Wait   
                Copy-Item $tempDir\Logs*.zip $tempDir\LOGS\SetupDiag-Log.zip  
                Copy-Item $tempDir\setupdiag*.log $tempDir\LOGS\  
                Remove-Item $tempDir\Logs*.zip  
            }  
      
           
            if($Global:UpdatesCollect -eq $True)  
            {  
                #GetUpdates Job via:  
                #UpdateHelper <--- GetUpdates Job has to finish first!  
                #Checking Status of GetUpdates Job...  
                wh "Checking Status of GetUpdates Job...`n"  
                If ((Get-Job -Name GetUpdates).State -eq "Failed")  
                    { wh "`nGetUpdates Job Failed!`n" }  
                        Else{  
                                Receive-Job -Name GetUpdates -wait  
                                Move $env:USERPROFILE\Desktop\WindowsUpdate.log $TempDir\LOGS\Windows-Update.log -Force  
                                wh "`n Writing Update Helper Info to UPDATE-ERRORS.TXT ... `n"  
                                UpdateHelper #run the update helper function  
                            }               
            } #End getting GetUpdates-job       
      
            #Finishing EventSearch  
            if($Global:EventsCollect -eq $True)  
                {  
                    writeSearch #function  
                }  
      
    #Wait on MSINFO...  
    if($Global:miscCollect -eq $True)  
    {  
        wh "`n Waiting for MSINFO32 to Complete ...`n"  
        do{ start-sleep 1 }  
        Until((get-process | select-string -Pattern "msinfo").Pattern -cne "msinfo")  
            werHint #function  
    }  
      
      
    if((Get-Host).Version.Major -cge 5) ##WIN7 Does not Support Transcript  
        {  
      
    Stop-Transcript   
      
            do{  
        start-sleep 1  
        }  
        Until((get-item $tempDir\LOGS\Event-Search.TXT).Length -cne 0)  
          
        }  
      
    wh "`nLog Collection Completed! `nLogs are available in %temp%\LOGS\`n"    
    wh "`nHit Any Key or Close ...`n"  
      
    Start-Sleep 1  
      
    Start Explorer.exe $explore  
      
    PAUSE  
      
    ## LOGS.PS1 1.6.3  ##     
    ## JOHNEM 8-2019 ##   
    ## EOF ##
      My Computer


  9. Posts : 919
    Windows 8.1 Enterprise x64
    Thread Starter
       #9

    Yes, I look, I did not explain exactly when the update fails. There is info in Windows Update that the update is successful, but when I click "Restart now" it is a message that the update is being configured, it reaches 100%, after which the laptop restarts and ... recovery from the system is started. When I restart my computer, the previous version of 1909 is restored. Oh, and I can't uninstall ESET, the computer is not mine, and its owner forbids me from uninstalling this program. I will try to explore these logs from $ Windows. ~ BT \ Sources \ Rollback as they will be, according to Microsoft, I should look there and check the logs from there to find out the cause of the problem. Oh, and disabling IIS did not help
      My Computer


  10. Posts : 32,878
    windows 10 professional version 1607 build 14393.969 64 bit
       #10

    When available please post the results from the 3 log collectors: V2, DM, and Powershell script
      My Computer


 

Related Threads
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:03.
Find Us




Windows 10 Forums