Windows 7 upgrade to 10 error 0x8007001F - 0x3000D

Page 1 of 7 123 ... LastLast

  1. Posts : 27
    Windows 7, going on 10
       #1

    Windows 7 upgrade to 10 error 0x8007001F - 0x3000D


    Repeatedly getting this same error, and rollback to Windows 7. Any help most appreciated! SetupDiag, Disk Management, Minitool Partition Wizard files here. Log-collector gave an error--screencap attached.

    No non-Microsoft antivirus installed.

    One other wrinkle: my motherboard's network input is fried, so I am using a network-USB adapter for internet--the upshot being that I can't unplug *all* USB devices (except keyboard/mouse) during the download phase of the update. I did try unplugging it after the download, and got the same error as usual.

    Windows 7 upgrade to 10 error 0x8007001F - 0x3000D-disk-management.pngWindows 7 upgrade to 10 error 0x8007001F - 0x3000D-log-collector-error.pngWindows 7 upgrade to 10 error 0x8007001F - 0x3000D-minitool-partition-wizard.pngSetupDiag_21-Jan-2020.logSetupDiagResults.log
      My Computer


  2. Posts : 43,247
    Win 10 Pro (22H2) (2nd PC is 22H2)
       #2

    Hi, one basic comment: you only have <14Gb free on C: and your system disk is very small compared to the others.
    There is a useful tutorial on how to save space. Note that Win 10 will require to create one or more further partitions.

    You need about 30-35Gb - Windows.old will be created, that's about as big as your existing Windows folder.

    Further:
    I can't unplug *all* USB devices (except keyboard/mouse) during the download phase of the update.
    Note that you can choose NOT to accept updates as part of the upgrade seqence- indeed you can disconnect the internet.
    This can occasionally be a significant help.

    Please perform the following basic checks:
    Download and run
    Hard Disk Sentinel (trial) and use that to check each disk.
    It gives an instant informative statement right on its GUI- the best I know.

    If all is ok, run
    chkdsk c: /scan
    from an admin command or Powershell prompt and report the result.

    Please provide the model number of your PC and the manufacturer's driver download page.
    Check to see if there's a BIOS update available.

    Search and advise if there is any evidence of your PC having been upgraded successfully.

    A user called @zbook will most likely take this further.
    Note that upgrade failures may take days of back and forth effort and may not be resolved.
      My Computers


  3. Posts : 6,427
    Windows 11 Pro - Windows 7 HP - Lubuntu
       #3

    Your main problem is that you don't have enough free space on your SSD.
    From your image I can see that the Page File is on drive H:. Did you also moved \Users to that disk?

    Before you do anything, detach ALL other drives (SATA or power cable) from the MB or you may end with part of the OS in one disk and part in another disk.
    My suggestion is to clone the SSD into a HDD bigger than 100G.
    Than do the upgrade on the HDD.
    After the installation you will have a Windows.old with Win 7 on it. (~35G)
    Run disk clean up to clean all installations files and the Windows.old.
    Clone the HDD (now with Win 10) into the SSD.
    Last edited by Megahertz; 22 Jan 2020 at 13:43.
      My Computers


  4. Posts : 41,547
    windows 10 professional version 1607 build 14393.969 64 bit
       #4

    1) There are two log collectors used in another forum room.
    Run the DM log collector and upload results into this thread:
    BSOD - Posting Instructions

    These steps will tune up the computer and increase the likelihood of a successful upgrade.

    Backup plans are needed in case troublehshooting steps do not fix underlying problems:
    Windows 10 - Test & Try with No Risk, No Install - Windows 7 Help Forums
    Clean Install Windows 10 Directly without having to Upgrade First
    Upgrade to Windows 10 from Windows 7 for Free
    Repair Install - Windows 7 Help Forums


    2) For all steps / tests please post images into the thread.
    In case there are problems posting images please use share links.
    Take Screenshot in Windows 10
    Screenshots and Files - Upload and Post in Seven Forums - Windows 7 Help Forums
    How to Upload and Post Screenshots and Files at Ten Forums

    3) Open administrative command prompt and type or copy and paste:
    4) sfc /scannow
    5) wmic recoveros set autoreboot = false
    6) wmic recoveros set DebugInfoType = 2
    7) wmic recoveros get autoreboot
    8) wmic recoveros get DebugInfoType
    9) net user
    10) bcdedit /enum all

    11) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

    12) Make sure that there is no over clocking while troubleshooting

    13) Make a backup image using Macrium:
    Macrium Software | Macrium Reflect Free:
    Macrium Software | Macrium Reflect Free
    Imaging with free Macrium - Windows 7 Help Forums
    https://www.sevenforums.com/tutorial...usb-drive.html

    14) Create a brand new restore point.
    Create System Restore Point in Windows 10
    https://www.sevenforums.com/tutorial...u-windows.html

    15) Post images of startup and recovery system failure and Virtual memory / page file settings:
    https://www.sevenforums.com/tutorial...eate-bsod.html

    16) Free up space on the Windows drive so that there is > 30 GB free space
    https://www.sevenforums.com/tutorial...-open-use.html
    https://www.sevenforums.com/tutorial...p-recover.html

    17) Open administrative command prompt and type or copy and paste:
    chkdsk /r /v
    This may take hours to run so plan to run overnight.
    Run on all drives using the syntax: chkdsk /r /v C: or chkdsk /r /v D: changing the drive letter to the applicable drive.

    C:\Windows\system32>chkdsk /r /v
    The type of the file system is NTFS.
    Cannot lock current drive.

    Chkdsk cannot run because the volume is in use by another
    process. Would you like to schedule this volume to be
    checked the next time the system restarts? (Y/N)

    Type: Y
    reboot


    https://www.sevenforums.com/tutorial...isk-check.html

    18) Use the information in this link to find the chkdsk report in the event viewer.
    Copy and paste into notepad > save to desktop > post into the thread using one drive or drop box share link:
    Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials

    Read Chkdsk Log in Event Viewer in Windows 10
    https://www.sevenforums.com/tutorial...iewer-log.html

    19) List and uninstall all non-Microsoft antivirus software
    (This includes always on and manual software.)
    (This includes running the applicable antivirus uninstall tools for any AV that could have been incompletely uninstalled)

    20) List and uninstall all non-Microsoft firewall software

    21) List all Microsoft and non-Microsoft drive encryption software.
    Uninstall all non-Microsoft disk encryption software

    22) Update the specs in the "My Computer" section:
    System Specs - Fill in at Ten Forums
    In the left corner below in your post you find 'My System Specs'.
    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
    https://www.sevenforums.com/tutorial...tem-specs.html

    Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, USB wireless network card, etc.)




    Code
    8007001F - 0x3000D
    Cause
    The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation.

    Mitigation

    Analyze log files in order to determine the files or registry entries that are blocking data migration.

    This error can be due to a problem with user profiles. It can occur due to corrupt registry entries under HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList or invalid files in the \Users directory.

    Note

    If a previous upgrade did not complete, invalid profiles might exist in the Windows.old\Users directory.

    To repair this error, ensure that deleted accounts are not still present in the Windows registry and that files under the \Users directory are valid. Delete the invalid files or user profiles that are causing this error. The specific files and profiles that are causing the error will be recorded in the Windows setup log files.

    https://docs.microsoft.com/en-us/win...ion-procedures
      My Computer


  5. Posts : 27
    Windows 7, going on 10
    Thread Starter
       #5

    Thanks very much for this. I'm working on this list--it will take more time than I have tonight--but the last part caught my eye:

    zbook said:
    Code
    8007001F - 0x3000D
    Cause
    The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation.

    Mitigation

    Analyze log files in order to determine the files or registry entries that are blocking data migration.

    This error can be due to a problem with user profiles. It can occur due to corrupt registry entries under HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList or invalid files in the \Users directory.

    Note

    If a previous upgrade did not complete, invalid profiles might exist in the Windows.old\Users directory.

    To repair this error, ensure that deleted accounts are not still present in the Windows registry and that files under the \Users directory are valid. Delete the invalid files or user profiles that are causing this error. The specific files and profiles that are causing the error will be recorded in the Windows setup log files.

    https://docs.microsoft.com/en-us/win...ion-procedures
    I looked up the error and found the relevant log (MigLog.xml). It's 95MB, so here's a link. One thing that might be in play here: my user directory and some programs are installed on a different drive (E:\Offdrive) than Windows (C:). (I did this to save room on the SSD because back when I bought it to install my OS on, they were pretty spendy.) I'm not savvy enough to know whether that's the problem, nor what can be done if it is. Thoughts?
      My Computer


  6. Posts : 41,547
    windows 10 professional version 1607 build 14393.969 64 bit
       #6

    The error code may change after completing many steps followed by a new upgrade attempt.

    For the latest upgrade attempt these were two noted problems:
    a) free drive space insufficient
    b) Microsoft security essentials was still installed (do not uninstall until the next upgrade attempt)

    When available please upload the results of the DM log collector.


    This is a checklist to run through before the next upgrade attempt. (It was composed for Windows 10 upgrade failures and some commands need to be modified or removed for Windows seven)

    Log troubleshooting can be very time consuming and tedious.
    So the tune up is performed followed by upgrades.

    Code:
    UPGRADE CHECK LIST:
    Run through this check list before the next upgrade attempt:
    
    1) remove nonessential hardware
    docks
    USB devices
    printers
    headset
    speakers
    joysticks
    projectors
    scanners
    plotters
    portable optical drives (CD, DVD)
    microphones
    cameras
    webcams
    smartphones
    bluetooth devices
    USB drives (other than a windows 10 iso if used for the upgrade)
    USB Wireless Mouse or Keyboard Receiver, USB Wireless Network Card
    secondary monitors
    
    
    2) These should be the only attached devices:
    wired mouse
    wired keyboard
    monitor
    
    Any of these that have been done in the past week are not necessary to repeat:
    
    
    3) open administrative command prompt and type or copy and paste: (repair file system)
    chkdsk /r /v 
    This may take many hours so plan to run overnight
    Find the chkdsk report in the event viewer using the information in this link and post into the thread:
    Read Chkdsk Log in Event Viewer in Windows 10 Performance Maintenance Tutorials
    https://www.tenforums.com/tutorials/40822-read-chkdsk-log-event-viewer-windows-10-a.html 
    
    4) open administrative command prompt and copy and paste: (repair operating system)
    sfc /scannow 
    dism /online /cleanup-image /restorehealth 
    When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
    
    5) update windows (have all recommended updates installed) and reboot after updates
    
    6) List and uninstall all non-Microsoft antivirus software
    (This includes always on and manual software.)
    (This includes running the applicable antivirus uninstall tools for any AV that could have been incompletely uninstalled)
    
    7) List and uninstall all non-Microsoft firewall software
    
    8) List all Microsoft and non-Microsoft drive encryption software. 
    Uninstall all non-Microsoft disk encryption software
    
    9) Run disk cleanup to clean temporary and system files
    
    10) Verify that the drive has > 30 GB free space (At least 25 GB is needed for creating dumps)
    
    11) Place the computer in clean boot:
    https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows
    How to perform a Clean Boot in Windows 10 - TechNet Articles - United States (English) - TechNet Wiki
    https://social.technet.microsoft.com/wiki/contents/articles/29876.how-to-perform-a-clean-boot-in-windows-10.aspx
    https://www.tenforums.com/tutorials/41804-perform-clean-boot-windows-10-troubleshoot-software-conflicts.html
    
    
    12) Detach all SATA devices other than the disk drive that has the Windows operating system
    (Make sure that the only disk drive that is attached to the computer at the time of the upgrade attempt is the disk drive containing Windows)
    (Other disk drives may be able to be detached by disconnecting cables or if necessary to remove the drive from the computer)
    
    13) Make sure that there is no metered connection:  https://support.microsoft.com/en-us/help/17452/windows-metered-internet-connections-faq
      My Computer


  7. Posts : 27
    Windows 7, going on 10
    Thread Starter
       #7

    zbook said:
    The error code may change after completing many steps followed by a new upgrade attempt.

    For the latest upgrade attempt these were two noted problems:
    a) free drive space insufficient
    b) Microsoft security essentials was still installed (do not uninstall until the next upgrade attempt)

    When available please upload the results of the DM log collector.
    Ok, I have to turn in for the night before I get to the rest of that, but here's the output from the DM log collector.
      My Computer


  8. Posts : 41,547
    windows 10 professional version 1607 build 14393.969 64 bit
       #8

    Please check to see if the BIOS is up to date and post a URL or hyperlink for the computer manufacturer's support for drivers and BIOS.
      My Computer


  9. Posts : 27
    Windows 7, going on 10
    Thread Starter
       #9

    zbook said:
    Please check to see if the BIOS is up to date and post a URL or hyperlink for the computer manufacturer's support for drivers and BIOS.
    I'm not a pro at this, but here's what I found--appears to be up to date:

    Windows 7 upgrade to 10 error 0x8007001F - 0x3000D-bios-info.png

    The manufacturer support mostly consists of links to component manufacturers, but here it is: Magic MICRO
      My Computer


  10. Posts : 32
    XP64 Professional, Windows 7 Ult. Windows 10 Ult
       #10

    I had similar problems like this as well when I was experimenting on what 10 would install on and not enough space is most likely your problem. It was for me as well and it takes up conciderably more space than its former flavors.
    While your at it before attempting again make a complete backup of all your drivers and there are a number of free driver collector utilities out there that work. I just did a fresh install on my Acer Aspire One netbook and the one glitch was my SD card reader wasn't detected and wasn't working. I had my Win7 drivers backed up including a driver utility for the card reader and for laughs I selected it, it installed and Bing! My card reader was installed and I now have an extra drive indicated.
    Hard drives have come down in price including SSD so I would get a much larger 1TB or larger to give you future options.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:20.
Find Us




Windows 10 Forums