Cannot upgrade Windows 10 from 1803 (Build 17134.1130) to 1909  

Page 5 of 6 FirstFirst ... 3456 LastLast

  1. Posts : 40,988
    windows 10 professional version 1607 build 14393.969 64 bit
       #41

    For Ccleaner uncheck:
    a) Memory dumps
    b) Windows log files
    c) Windows error reporting
    d) Windows event logs

    Update the progress with post #26 steps #8, #9, #10.
      My Computer


  2. Posts : 23
    Windows 10 (64bit)
    Thread Starter
       #42

    zbook said:
    Thank you for complying with rule #4.

    1) Make a new restore point:
    Create System Restore Point in Windows 10

    2) Download a Windows 10 iso 1803 to the desktop:

    Windows Download - #1 Windows ISO Download Source
    Microsoft Windows and Office ISO Download Tool
    TechBench by WZT (v4.1.1)

    3) Place the computer into clean boot:

    https://support.microsoft.com/en-us/...oot-in-windows
    How to perform a Clean Boot in Windows 10 - TechNet Articles - United States (English) - TechNet Wiki
    https://social.technet.microsoft.com...indows-10.aspx
    Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts

    4) Perform an in place upgrade repair with the same Windows version: 1803 while in clean boot

    5) Open disk management > by default some columns are compressed > widen each Status and Volume > make sure the contents within the parenthesis are in full view and that none of the characters are cutoff > view disk 0 > widen this row as needed so that all of the characters are in full view > post an image into the thread
    Disk Management - How to Post a Screenshot of

    6) Download and install Minitool Partition Wizard > post an image of the results into this thread
    MiniTool Partition Wizard Free Edition - Free download and software reviews - CNET Download.com

    7) Open Ccleaner > click windows tab or custom clean > scroll down to system and advanced > post an image into the thread

    8) Open administrative command prompt and type or copy and paste:
    chkdsk /r /v
    This may take hours to run so plan to run overnight.
    Run on all drives using the syntax: chkdsk /r /v C: or chkdsk /r /v D: changing the drive letter to the applicable drive.

    C:\Windows\system32>chkdsk /r /v
    The type of the file system is NTFS.
    Cannot lock current drive.

    Chkdsk cannot run because the volume is in use by another
    process. Would you like to schedule this volume to be
    checked the next time the system restarts? (Y/N)

    Type: Y
    reboot


    9) Use the information in this link to find the chkdsk report in the event viewer. Copy and paste into notepad > save to desktop > post into the thread using one drive or drop box share link:
    Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials
    Read Chkdsk Log in Event Viewer in Windows 10


    10) Find this driver on the computer and see whether it can be uninstalled or whether there is a replacement:

    Code:
    PcaSp60.sys	PCAUSA Rawether NDIS 6 SPR Protocol Driver (AMD64)	http://www.pcausa.com/support/default.htm
    Code:
    Event[69]:
      Log Name: System
      Source: Service Control Manager
      Date: 2020-01-05T16:26:17.771
      Event ID: 7000
      Task: N/A
      Level: Error
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: liquidBorn-PC
      Description: 
    The PCASp60 NDIS Protocol Driver service failed to start due to the following error: 
    Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
    1: done
    2: done
    3: done
    4: fails, again with the same mention of Bitlocker in SetupDiag's log
    5: See my previous post.
    6: See my previous post.
    7: See my previous post.
    8: Done.
    9: See eventviewer-chkdskwininit.txt.
    10. Removed.
    Cannot upgrade Windows 10 from 1803 (Build 17134.1130) to 1909 Attached Files
      My Computer


  3. Posts : 40,988
    windows 10 professional version 1607 build 14393.969 64 bit
       #43

    Open administrative PS and copy and paste:

    Code:
    function wh   
        {  
            Param ( [parameter (Mandatory = $true)][string]$txt )  
            Write-Host $txt -ForegroundColor Green -BackgroundColor Black -NoNewline  
            ##Example usage wh "Alias for `n Write-Host"  
      
        } ## End function wh  
      
      
    function StartScript   
        {  
            ##Locating Temp Dir and writing Transcript  
            $global:tempDir = [System.IO.Path]::GetTempPath()   
            MD $tempDir\LOGS -EA SilentlyContinue   
            CD $tempDir\LOGS  
            $txtCount = Get-Item $tempDir/LOGS/*.TXT -EA SilentlyContinue  
            if((Get-Host).Version.Major -cge 5) ##WIN7 Not Supported  
                {  
                    if($txtCount.Count -cge 1)   
                    {Start-Transcript -Append -Path $tempDir/LOGS/Event-Search.TXT}   
                    Else{Start-Transcript -Path $tempDir\LOGS\Event-Search.TXT}   
                }  
      
            $global:explore = $tempDir + "LOGS\"  
            $global:Ver = "1.6.3"  
            wh "`nLog Collection... (V$Ver)`n"  
      
            #clearing previous actions  
            Stop-Job *  
      
            #Initialize CheckBox Vars to $True/$False  
                $Global:EventsCollect = $true; $Global:SetupDiagCollect = $true  
                    $Global:UpdatesCollect = $true; $Global:WLANCollect = $true  
                        $Global:PowerCollect = $true; $Global:GPCollect = $true  
                            $Global:miscCollect = $true; $Global:bingCollect = $true  
                                $Global:eventOut = $false        
            #Clear Jobs  
            Stop-Job *  
            Remove-Job *  
                                              
        } ## End function Start-Script  
      
      
    function SetupDiagFunc  
        {  
            wh "`n Grabbing SetupDiag.exe ..."       
            Invoke-WebRequest https://go.microsoft.com/fwlink/?linkid=870142 -OutFile $tempDir\SetupDiag.exe -TimeoutSec 3 -UseBasicParsing  
                #check for successful download  
                if((Get-Item $tempDir\SetupDiag.exe).length -gt 100000)  
                    {  
                      wh "`nSuccessful DL!"  
                      wh "`n Invoking SetupDiag.exe ..."  
                      $SetupDiag = {CMD.EXE /C "%temp%\setupdiag.exe /Verbose /Output:%temp%\SetupDiag-Log.txt"}  
      
                      ## Kick-Off SetupDiagJob  
                      Start-Job -Name SetupDiagJob -ScriptBlock $SetupDiag                     
                      
                    }Else{Write-Host "`nDownload of SetupDiag.exe Failed!" -BackgroundColor RED }  
      
        } ## End Function SetupDiagFunc  
      
      
    function EventSearch  
        {  
        wh "`n Starting EventSearch Job-Function ...`n"  
        ## Gathering Events from System using Get-WinEvent via Job  
        $EventSearchJob =   
            {  
            $evtPaths = Get-Item C:\Windows\System32\Winevt\Logs\*.evtx -Exclude "*PowerShell*",   
                "*known folders*" | Select-Object FullName  
            $i = $evtPaths.Count  
      
            $x = 0 ##For 1st Loop do Until x = i  
            $events = @()  
            $gatherEvents = @()  
            $eventsArray = @()  
            $searchResult = @()  
            $MaxEvents = 99  
      
            #Loading/Gathering Events Loop...  
            do {  
           
                ##Getting Events w/ Get-WinEvent         
                $gatherEvents = Get-WinEvent -Path $evtPaths[$x].FullName -MaxEvents $MaxEvents -EA SilentlyContinue  
                $events = $events + $gatherEvents             
      
                $x++  
                  
                }  
                 Until ($x -eq $i)      
      
            $x = $x +1 ##Total Events Found!  
              
            $eventsLength = $events.Length ##Total events catalogged!  
              
            $xx = 0  
                   
            # Write Event Properties to a row and roll it out - Collapsing Array ...   
            do {  
                   $date = $events[$xx].TimeCreated | Get-Date -Format "yyyyMMdd".ToString() -EA SilentlyContinue ##EA SC for Blank Entries  
                      
                    $eventRow = new-object PSObject -Property @{  
                    Date = $date;  
                    Id = $events[$xx].Id;  
                    Level = $events[$xx].LevelDisplayName;  
                    Provider = $events[$xx].ProviderName;  
                   Message = $events[$xx].Message;  
                    }  
      
                    $cRow = $date + " " + "ID:" +  $events[$xx].Id + " " + "Level:" + $events[$xx].LevelDisplayName + " " + "Provider:" + $events[$xx].ProviderName + " " + "Message:" + $events[$xx].Message   
                    $eventsArray += $cRow  
                   
                    $xx++  
                    $d++  
            }  
            Until ($xx -eq $events.Length)  
     
            ##Looking for patterns error or fail in $eventsArray  
            $search = $eventsArray | Select-String -pattern ("error|fail") 
     
            Return $search ## | Write-Output ##Output for job  
      
            } ## End $EventSearchJob  
      
        Start-Job -Name EventSearchJob -ScriptBlock $EventSearchJob  
      
        } ## End function Event-Search  
      
      
    function writeSearch  ##   
        {  
            ##Event Logs Cont.  
            MD $tempDir\LOGS\EVTX\ -EA SilentlyContinue 
     
            ##output to file  
            $search | Group-Object | Sort-Object Count -Descending | Format-Table Count, Name -Wrap > TOP-ERRORS.TXT  
            $search > $tempDir\LOGS\SEARCH.TXT  
      
        if($Global:eventOut -eq $True)  
            {  
            $search | Group-Object | Sort-Object Count -Descending |   
                Select-Object -Property Count, Name | Out-GridView -Title "Top `"Errors`" via EVTX - V-$Ver"  
            }  
      
            wh "`n Collecting Matching EVTX Entries ...`n"     
            #Collecting all prev matching EVTX  
            #$evtx = Get-ChildItem C:\Windows\System32\Winevt\Logs\*.evtx  
            $evv = 0  
                      
               $providerName =   
                   (($search | Select-String "Provider:.*Message:").Matches.Value -Replace   
                          " Message:", "" -Replace "Provider:", "" | Group-Object ).Name  
                  
                #Converting Provider Name to Log Name                 
                $providerName = (($providerName | ForEach-Object {Get-WinEvent -ProviderName $_ -MaxEvents 1 -EA SilentlyContinue}).LogName | Group-Object).Name     
                   $providerName = $providerName -replace "Microsoft.", ""  
                      $providerName = $providerName -replace "Windows.", ""  
                         $providerName = $providerName -replace "`/.*$", ""  
                               
                               
                             $evtx = $providerName | foreach{Get-ChildItem "C:\Windows\System32\winevt\logs\*$_*"}  
      
                    Do{  
                        COPY $evtx[$evv].PSPath $tempDir\LOGS\EVTX\ 
                           $evv++  
                      }  
                      Until($evv -eq $evtx.Count)  
      
        } #End function writeSearch  
      
      
    function GetUpdates  
        {  
            wh "`n Starting Get-WindowsUpdateLog Job-Function ...`n"  
            $updateJob = {get-WindowsUpdateLog}  
             
            if((Get-Host).Version.Major -cge 5) ##Modern Gatherer  
            {  
                Start-Job -Name GetUpdates -ScriptBlock $updateJob  
            }  
              
            ##Legacy Gatherer  
            CP C:\Windows\WindowsUpdate.log $tempDir\LOGS\WindowsUpdate.log  
      
            ##Installed-Updates/Packages 
            Get-WmiObject win32_quickfixengineering > $tempDir\LOGS\Installed_Updates.TXT  
            Get-WmiObject Win32_OperatingSystemQFE >> $tempDir\LOGS\Installed_Updates.TXT  
        DISM /Online /Get-Packages /Format:Table >> $tempDir\LOGS\Installed_Updates.TXT 
      
        } ## End function Get-Updates  
      
           
    function PrinterCheck  
        {  
            wh "`n Getting Printer Information ..."  
            get-printer | ft Name, ComputerName, Type, DriverName, PortName, Datatype, Location, DriverName > $tempDir\LOGS\Printers.TXT  
            get-printerDriver | fl >> $tempDir\LOGS\Printers.TXT  
            Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers" | Out-File $tempDir\LOGS\Printers.TXT -Append  
            Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers" | Out-File $tempDir\LOGS\Printers.TXT -Append  
            Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors" | Out-File $tempDir\LOGS\Printers.TXT -Append  
            write-output "## CBS ntprint CHECK ##" >> $tempDir\LOGS\Printers.TXT  
            $cbsCheck = (Get-ChildItem C:\Windows\Logs\CBS\*cbs* -Recurse | select-string -Pattern "E_INVALIDARG in eventsXml.*Microsoft-Windows-PrintService")  
            if($cbsCheck.Count -eq 0){Write-Output "## NO MATCHES IN CBS ##" >> $tempDir\LOGS\Printers.TXT} Else{$cbsCheck | Group-Object  >> $tempDir\LOGS\Printers.TXT}  
            write-output "## ntprint.dll CHECK ##" >> $tempDir\LOGS\Printers.TXT  
            (Get-ChildItem C:\Windows\System32\ntprint.dll).VersionInfo | ft -AutoSize >> $tempDir\LOGS\Printers.TXT  
            (Get-ChildItem C:\Windows\SysWOW64\ntprint.dll).VersionInfo | ft -AutoSize >> $tempDir\LOGS\Printers.TXT  
      
        } ## End function PrinterCheck  
      
      
    function UpdateHelper  
        {  
        if((Get-Host).Version.Major -cge 5)  
            {  
                $winupdatelog = get-item $tempDir\LOGS\windows-update.log    ##WIN-10 File  
                MD $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue | Out-Null  
                CP C:\Windows\Logs\WindowsUpdate\*.etl $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue  
            }  
                Else{$winupdatelog = get-item $tempDir\LOGS\windowsupdate.log} ##LEGACY File  
      
        $updateError = ($winupdatelog | select-string -pattern "error.*0x........");  
        $updateErrorSplit = $updateError -Split " "  
        $updateErrorCount = (($updateErrorSplit | select-string -pattern "0x........") -Replace "[(),'`.:]", "" -Replace "hr=", "");  
      
        $updateErrorCount | Group-Object | Sort-Object Count -Descending | Format-Table Count, Name | Out-File $tempDir\LOGS\UPDATE-ERRORS.TXT -Width 999  
        $updateError >> UPDATE-ERRORS.TXT  
        if($updateError.length -eq 0){"No `"error.*0x........`" patterns Found in Windows-Update.log" | Out-File $tempDir\LOGS\UPDATE-ERRORS.TXT}  
      
        ($winupdatelog | Select-String "KB\d\d\d\d\d\d\d" | Select-string "fail") | Out-file $tempDir\LOGS\UPDATE-ERRORS.TXT -Append -width 999  
      
        } ## End function UpdateHelper  
      
      
    function getProcesses  
        {  
        wh "`nGetting Active Process ...`n"   
        Get-Process > $tempDir\LOGS\Running-Processes.TXT  
        CMD.EXE /C "tasklist /svc" | Out-File -Append  $tempDir\LOGS\Running-Processes.TXT  
          
        } ## End function getProcesses  
      
      
    function GetApps  
        {  
        wh "`n Getting List of Installed Apps...`n"  
        Get-WmiObject -Class Win32_Product | Format-Table -Property Name, Version, Vendor > $tempDir\LOGS\Installed-Apps.TXT  
        Get-AppxPackage | ft Name, Version, InstallLocation, IspArtiallyStaged, SignatureKind, Status >> $tempDir\LOGS\Installed-Apps.TXT  
          
        } ## End function GetApps  
      
      
    function SetupLogs  
        {  
        wh "`nGetting Windows Setup Logs Independent of SetupDiage.exe...`n"  
            MD $tempDir\LOGS\SETUP\ -EA SilentlyContinue  
        dir C:\ > $tempDir\LOGS\Dir_Structure.txt  
          
        ## Main Setup Collection  
        if($env:SystemDrive -eq 'C:') ##Verify SystemDrive  
        {  
            $SetupPaths = @()  
      
            $locations = @(  
                'C:\GetCurrent',  
                'C:\$Reset',  
                'C:\$SysReset',  
                'C:\$Windows.~BT',  
                'C:\$Windows.~WS',  
                'C:\Windows\Logs\',  
                'C:\Windows\Panther\',  
                'C:\Windows\inf\',  
                'C:\Windows\System32\LogFiles\',  
                'C:\Windows\System32\SysPrep\',  
                'C:\Windows10Upgrade',  
                'C:\Windows.old\Windows\Panther')  
      
            for($i = 0; $locations.count -gt $i; $i++)  
            {   
                if((get-item $locations[$i] -Force -EA SilentlyContinue).length -gt 0) ##Null Path Check -Force for Hidden  
                {  
                    CD $locations[$i]  
                    ##Search includes setuperr/setupact only  
                    $SetupPaths += Get-ChildItem * -Force -Recurse -Include setuperr.log, setupact.log, miglog.xml, *APPRAISER_Humanreadable.xml -EA SilentlyContinue      
                }  
            }  
      
            $cleanPaths = @()  
      
            for($i = 0; $SetupPaths.count -gt $i; $i++)  
            {  
                $cleanPaths += $SetupPaths[$i].PSParentPath.ToString() -replace "Microsoft\.PowerShell\.Core\\FileSystem\:\:C\:\\", ""  
            }  
      
            CD $tempDir\LOGS\SETUP\  
            MD $cleanPaths -Force  
            CD $tempDir\LOGS\  
      
            for($i = 0; $SetupPaths.count -gt $i; $i++)  
            {  
                $destPath = "$tempDir\LOGS\SETUP\" + $cleanPaths[$i]  
                $copyPathLog = ($SetupPaths[$i].ToString())  
                  
                Copy  $copyPathLog -Destination $destPath  
            }  
          
        }Else{Write-Host "`nSystem Drive is not C:... Setup Collection Aborted!`n"}  
        ## End Main Setup Collection  
          
              
            ## Setup Reg Output      
            Get-ChildItem HKLM:\SYSTEM\SETUP\ | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT  
            Get-ChildItem HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\OOBE\Me* -recurse -EA SilentlyContinue | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT -Append  
            Get-Childitem HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT -Append  
      
            ## SetupAct String Search  
      
      
              
             $setupRegx = @("MOUPG SetupHost..Initialize:",  
                            "============================",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG  SetupHost..Initialize. CmdLine"),  
                            "",  
                            "MOUPG Setup build & Host OS Build:",  
                            "==================================",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG  SetupHost..Setup build"),  
                            "...",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG      Host OS"),  
                            "",  
                            "Watson Parameters (4&5):",  
                            "=======================",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "Watson Bucketing Parameters\[[4-5]\]" ),  
                            "",  
                            "\[0x........\]Error:",  
                            "==================",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "\[0x........\]\[0x.....\]"),  
                            "",  
                            "`"FATAL`":",  
                            "======",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "FATAL" | Select-String -NotMatch "FatalExecutionEngineError" | Select-String -NotMatch "non-fatal"),  
                            "",  
                            "`"Error   `":",  
                            "===========",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "Error   "),  
                            "",  
                            "MIGRATE.*DATA:",  
                            "==============",  
                            "",  
                            (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MIGRATE.*DATA"),  
                            ""             
                            )  
                $q=0  
                Do {$setupRegx[$q] | Out-File $tempDir\LOGS\SETUP\SetupAct-Regex.TXT -Append -Width 999 ##spool out results  
                                      $q++                    
                                                }Until($q -eq $setupRegx.Count)  
      
        } ## End function SetupLogs  
      
      
    function powerCFGInfo  
        {  
        MD $tempDir\LOGS\POWER\ -EA SilentlyContinue  | Out-Null  
        wh "`n Grabbing PowerCFG, Sleep & Battery Info ...`n"  
          
        ("`n" + "Available Sleep States (/A): `r" + "`n" +"============================`r" + "`r").ToString() | Out-File -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        powercfg /a | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
        ("`n" + "-DeviceQuery Wake_Armed: `r" + "`n" +"========================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        powercfg -devicequery wake_armed  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
        ("`n" + "Last Wake (-lastwake):  `r" + "`n" +"=====================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        powercfg -lastwake  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        ("`n`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
        ("`n" + "-Requests: `r" + "`n" +"==========`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        powercfg -requests  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
        $powerList = powercfg -list  
        $powerList | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        $powerActive = $powerList | select-string "\*" | powercfg /QH "$_"   
        ("`n`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
        ("`n" + "Active Power Scheme Details: `r" + "`n" +"============================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
        $powerActive | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
      
      
        if((Get-Host).Version.Major -cge 5) ##WIN7 Does not Support powercfg /battery /sleepstudy  
             {   
               $ifbattery = Get-WmiObject win32_battery  
               if ( $ifbattery.__SERVER.count -cge 1 ) { CMD.EXE /C "powercfg /batteryreport /output %temp%\LOGS\POWER\battery-report.html" }  
               CMD.EXE /C "powercfg /sleepstudy /output %temp%\LOGS\POWER\sleepstudy-report.html"  
             }  
               CMD.EXE /C "powercfg /ENERGY /duration 10 /output %temp%\LOGS\POWER\energy-report.html"         
          
        } ## End function powerCFGInfo  
      
      
    function sysProductCheck  
        {  
        wh "`n Getting SystemProductName ...`n"  
        ##SystemInformation Reg   
        reg query HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SystemInformation\ /v SystemProductName  > $tempDir\LOGS\REG_SystemProductName.TXT   
        Get-WmiObject Win32_ComputerSystem > $tempDir\LOGS\WMI_Object_System.TXT  
        Get-WmiObject Win32_ComputerSystemProduct >> $tempDir\LOGS\WMI_Object_System.TXT  
          
        } ## End functions sysProductCheck  
      
      
    function showWLAN  
        {  
        wh "Generating NETSH WLAN Report...`n"  
      
        $showWLANjob = {  
                        CMD.EXE /c "netsh wlan show networks mode=ssid > %temp%\LOGS\Network\wlan.txt"  
                        CMD.EXE /c "netsh wlan show networks mode=bssid >> %temp%\LOGS\Network\wlan.txt"  
                        CMD.EXE /c "netsh winhttp show proxy > %temp%\LOGS\Network\proxy.txt"  
                        CMD.EXE /c "netsh wlan show wlanreport & COPY C:\ProgramData\Microsoft\Windows\wlanReport\wlan-report-latest.html %temp%\LOGS\Network\wlan-report-latest.html"   
                        ##WIN7 Does not Support netsh wlanreport                                                    
                        }   
      
        Start-Job -Name showWLAN -ScriptBlock $showWLANjob  
      
        } ## End function sysProductCheck  
      
      
    function getGPRESULT  
        {  
        wh "`nGetting GPRESULT...`n"  
        CMD.EXE /C "GPRESULT /V > %temp%\LOGS\GPRESULT.TXT"  
          
        } ## End function getGPRESULT  
      
      
    function reservedCheck  
        {       
             
        $reservedJob =   
            {  
            $vol = (mountvol /L | select-string -Pattern "\\\\")  
            $volstring = "mountvol y:" + $vol[0]  
            CMD.EXE /C $volstring  
          
            SLEEP 2  
      
            CMD.EXE /C "CHKDSK y: > %temp%\LOGS\SystemReserved.TXT"  
          
            SLEEP 2 # Pause after drive dismount  
          
            CMD.EXE /C "mountvol y: /D"  
            }  
      
        Start-Job -Name reservedJob -ScriptBlock $reservedJob  
          
        } ## End function reservedCheck  
      
      
    function fltmcCheck  
        {  
        wh "`n Getting fltmc Filters ...`n"  
        CMD.EXE /c "fltmc filters > %temp%\LOGS\fltmc_filters.TXT"  
          
        } ## End function fltmcCheck  
      
      
    function getDXDiag  
        {  
        wh "`n Grabbing DXDiag Info...`n"  
        C:\Windows\System32\dxdiag /x $explore\DxDiag  
          
        } ## End function getDXDiag  
      
      
    function getMSINFO  
        {  
        wh "`n Gathering MSINFO32 ...`n"  
        ## check if msinfo is already gathering - if so stop  
        If((get-process | select-string -Pattern "msinfo").Pattern -eq "msinfo")  
        {Stop-Process -ProcessName msinfo32}  
      
            C:\Windows\System32\msinfo32.exe /nfo $tempDir/LOGS/MSINFO32.NFO  
                     
        } ## End function getMSINFO  
      
      
    function getAV  
        {  
         if((Get-Host).Version.Major -cge 5) ##Modern OS Only  
            {  
            wh "`n Grab root\SecurityCenter2 AntivirusProduct ...`n"  
            $avPath = (Get-WmiObject -Namespace root\SecurityCenter2 -Class AntivirusProduct) | % {$_.pathtoSignedProductEXE}  
            "AV Info" + "`n========" | Out-File $tempDir/LOGS/SecurityProductInformation.TXT 
        $avPath | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append  
            if($avPath[0] -match "exe")  
                {   
                    $path = (Get-Item $avPath[0]).PSParentPath  
                    Get-Item $path/*.ini | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append  
                    Get-Content $path/*.ini | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append             
                }  
                Get-ChildItem "HKLM:\SOFTWARE\Policies\Microsoft\Windows Defender\" -recurse -EA SilentlyContinue | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append      
            }  
        } ## End function getAV  
      
      
    function getDrivers  
        {  
        wh "`n Grabbing Driver listing via DISM.EXE ...`n"  
            $drivers = cmd.exe /C "dism /online /get-drivers /format:table"  
            $drivers += cmd.exe /C "dism /online /get-drivers /all /format:table"  
            $drivers | Out-File $tempDir/LOGS/DISM-Get-Drivers.TXT  
        wh "`n Done!`n"  
        } ## End Function getDrivers  
      
      
    function getMISCLogs  
        {  
            wh "`nCopying misc. logs ...`n"   
            MD $tempDir\LOGS\WER\ -EA SilentlyContinue   
            MD $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue  
            CP "C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\*" $tempDir\LOGS\WER\ -Recurse -EA SilentlyContinue  
            CP "C:\Windows\Logs\CBS\*cbs*" $tempDir\LOGS\Windows\Logs\  
            CP "C:\Windows\Logs\DISM\*dism*" $TempDir\LOGS\Windows\Logs\  
            CP "C:\Windows\Logs\WindowsUpdate\*" $TempDir\LOGS\Windows\Logs\WindowsUpdate\  
      
                
            #DMP Collect  
            $dmp = @()  
            $dmp += Get-ChildItem C:\Windows\*.dmp   
            $dmp += (Get-ChildItem C:\Windows\LiveKernelReports\*.dmp -Recurse -EA SilentlyContinue)  
            $dmp += (Get-ChildItem C:\Windows\Minidump\*.dmp -Recurse -EA SilentlyContinue)  
            #Validate empty array  
            if($dmp.length -ne 0)  
                {  
                $dd=0  
                      Do{       
                            If($dmp[$dd].length -lt 2000000)  
                                { $destPath = $dmp[$dd].PSParentPath.Replace('C:\', '').Replace('Microsoft.PowerShell.Core\FileSystem::', '')  
                                    MD $destPath -EA SilentlyContinue 
                                        COPY -Path $dmp[$dd].PSPath -Destination $destPath }  
                            $dd++  
                        }  
                        Until($dd -eq $dmp.Count)  
                }  
     
             #disk info 
             "`nGet-Disk:`n=========" > $tempDir\LOGS\Disk-Info.TXT  
             Get-Disk |fl >> $tempDir\LOGS\Disk-Info.TXT 
             "`nGet-Partition:`n==============" >> $tempDir\LOGS\Disk-Info.TXT  
             Get-Partition >> $tempDir\LOGS\Disk-Info.TXT 
             Manage-bde -protectors -get C: >> $tempDir\LOGS\Disk-Info.TXT 
             "`nIO Fail Search:`n===============`n" >> $tempDir\LOGS\Disk-Info.TXT 
             $search | Select-String ".*io.fail.*" | Select-String -NotMatch '0, 0, 0, 0' >> $tempDir\LOGS\Disk-Info.TXT        
      
        } ## End function getMISCLogs  
      
      
    function bingCollect  
        {  
            ##O365 Firewall Check & Bing.com diagnostics.asp  
            ##URIs based on Article:   
            ##https://support.office.com/en-us/article/Network-requests-in-Office-365-ProPlus-and-Mobile-eb73fcd1-ca88-4d02-a74b-2dd3a9f3364d  
                    
            MD $TempDir\LOGS\Network\ -EA SilentlyContinue  
      
            wh "Performing Bing & O365 URI Check ... `n"  
      
      
                  $bingCheck = (Invoke-WebRequest -Uri https://www.bing.com/fdv2/diagnostics.aspx -UseBasicParsing)   
                  $bingCheck | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT  
                     
                  $URIs = @('api.login.microsoftonline.com',    #0  Standard Reply = 403  
                  'api.passwordreset.microsoftonline.com',      #1  Standard Reply = 200  
                  'becws.microsoftonline.com',                  #2  Standard Reply = 403  
                  'clientconfig.microsoftonline-p.net',         #3  Standard Reply = 404  
                  'companymanager.microsoftonline.com',         #4  Standard Reply = 403  
                  'device.login.microsoftonline.com',           #5  Standard Reply = 200  
                  'graph.microsoft.com',                        #6  Standard Reply = 404  
                  'hip.microsoftonline-p.net',                  #7  Standard Reply = 404   
                  'hipservice.microsoftonline.com',             #8  Standard Reply = 404  
                  'login.microsoft.com',                        #9  Standard Reply = 200  
                  'login.microsoftonline.com',                  #10 Standard Reply = 200  
                  'logincert.microsoftonline.com',              #11 Standard Reply = 200   
                  'loginex.microsoftonline.com',                #12 Standard Reply = 200  
                  'login-us.microsoftonline.com',               #13 Standard Reply = 200  
                  'login.microsoftonline-p.com',                #14 Standard Reply = 200  
                  'login.windows.net',                          #15 Standard Reply = 200  
                  'nexus.microsoftonline-p.com',                #16 Standard Reply = 403  
                  'passwordreset.microsoftonline.com',          #17 Standard Reply = 200  
                  'provisioningapi.microsoftonline.com',        #18 Standard Reply = 403  
                  'stamp2.login.microsoftonline.com',           #19 Standard Reply = 200  
                  'ccs.login.microsoftonline.com',              #20 Standard Reply = 401  
                  'ccs-sdf.login.microsoftonline.com',          #21 Standard Reply = 401  
                  'accounts.accesscontrol.windows.net',         #22 Standard Reply = 200  
                  'secure.aadcdn.microsoftonline-p.com',        #23 Standard Reply = 400  
                  'windows.net',                                #24 Standard Reply = 200  
                  'phonefactor.net',                            #25 Standard Reply = 200  
                  'account.activedirectory.windowsazure.com',   #26 Standard Reply = 404  
                  'secure.aadcdn.microsoftonline-p.com',        #27 Standard Reply = 400  
                  'login.windows.net',                          #28 Standard Reply = 200  
                  'provisioningapi.microsoftonline.com',        #29 Standard Reply = 403  
                  'mscrl.microsoft.com',                        #30 Standard Reply = 400  
                  'secure.aadcdn.microsoftonline-p.com',        #31 Standard Reply = 400  
                  'windowsupdate.microsoft.com',                #32 Standard Reply = 200  
                  'update.microsoft.com',                       #33 Standard Reply = 200  
                  'au.download.windowsupdate.com',              #34 Standard Reply = 200  
                  'download.windowsupdate.com',                 #35 Standard Reply = 200  
                  'download.microsoft.com',                     #36 Standard Reply = 200  
                  'tlu.dl.delivery.mp.microsoft.com');          #37 Standard Reply = 403  
              
                     
                  $count = 0;  
                  $queryResult =@{};  
                     
                  Write-Host "Checking URIs .." -NoNewline  
                     
                  Do {           
                          Try{  
                          $queryResult[$count] = (Invoke-WebRequest -Uri ("http:`/`/" + $URIs[$count]) -Method Head -UseBasicParsing -TimeoutSec 2).RawContent  
                             }Catch{ $catch = $_ }  
                     
                              if($queryResult[$count].Count -eq 0)  
                                      {$queryResult[$count] = ($catch[$catch.count -1].ToString()).Replace("`n", " ")}                                     
                          Write-Host "." -NoNewline           
                          $count++         
                      }Until ($count -eq ($URIs.Count));                            
                  Write-Host "."  
                      
                      Get-Date | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
                      $queryResult | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
                        
            Write-Host " Bing Check", `n, "==========" | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
            
                  wh "`n`n`n`URL Check Finished...`n"   
        }  
      
      
    function smbConfig  
    {  
      
        $CMDs =  
        {   cmd.exe /c "net config server"    
            cmd.exe /c "net config workstation"  
            Get-SmbClientNetworkInterface  
            Get-SmbServerConfiguration  
            Get-SmbClientConfiguration  
            Get-ChildItem "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer"   
            Get-NetAdapterAdvancedProperty | ft }  
      
        ForEach-Object{Invoke-Command $CMDs | Out-File $TempDir\LOGS\NETWORK\$env:COMPUTERNAME-SMB-Config.TXT -Append}  
      
        $share = Get-SmbShare  
      
        ForEach-Object{Get-SmbShareAccess $share.Name | ft  | Out-File $tempDir\LOGS\NETWORK\$env:COMPUTERNAME-SMB-Config.TXT -Append}  
      
    } ## End Function smbConfig  
      
      
    function regLang  
        {       
            DISM.EXE /Online /Get-Intl  | Out-File $tempDir\LOGS\Reg-Lang.TXT  
            "`n","Get-WinUserLanguageList","=======================" | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
            Get-WinUserLanguageList     | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
            "`n","Get-WinLanguageBarOption","========================" | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
            Get-WinLanguageBarOption    | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
        }  
      
      
    function autoRotate  
        {  
            Get-ChildItem HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\Auto* | Out-File $tempDir\LOGS\AutoRotate.TXT  
        }  
      
      
    function checkBoxes  
       {  
            Add-Type -AssemblyName System.Windows.Forms  
            Add-Type -AssemblyName System.Drawing  
      
            $Global:form = New-Object System.Windows.Forms.Form  
            $Global:form.Text = "LOGS-V$ver"  
            $Global:form.Size = New-Object System.Drawing.Size(300,400)  
            $Global:form.StartPosition = 'CenterScreen'  
      
            $OKButton = New-Object System.Windows.Forms.Button  
            $OKButton.Location = New-Object System.Drawing.Point(100,300)  
            $OKButton.Size = New-Object System.Drawing.Size(75,23)  
            $OKButton.Text = 'OK'  
            $OKButton.DialogResult = [System.Windows.Forms.DialogResult]::OK  
            $Global:form.AcceptButton = $OKButton  
            $Global:form.Controls.Add($OKButton)  
             
            $Global:form.ControlBox = $false  
              
                $Global:boxNum = 1  
                $Global:checkBox = @{} #hash for $checkBox  
                $tag = @{} #hash for $label  
                $Global:Box = @{}  
      
                function createCheckBox   
                    {  
                        Param ( [parameter (Mandatory = $true)][string]$name,  
                                [parameter (Mandatory = $true)][string]$label )  
                          
                        $drawingPoint = (50 + ($boxNum *25))  
      
                        $Global:checkBox[$boxNum] = New-Object System.Windows.Forms.CheckBox  
                        $Global:checkBox[$boxNum].Location = New-Object System.Drawing.Point(10,$drawingPoint)  
                        $Global:checkBox[$boxNum].Size = New-Object System.Drawing.Size(15,15)  
                        $Global:checkBox[$boxNum].Text = ''  
                        $Global:checkBox[$boxNum].Checked = $true  
                        $Global:form.Controls.Add($checkBox[$boxNum])  
                        #SetupDiag Label  
                        $tag[$boxNum] = New-Object System.Windows.Forms.Label  
                        $tag[$boxNum].Location = New-Object System.Drawing.Point(40,$drawingPoint)  
                        $tag[$boxNum].Size = New-Object System.Drawing.Size(280,20)  
                        $tag[$boxNum].Text = "$label"  
                        $Global:form.Controls.Add($tag[$boxNum])  
      
                        $Global:boxNum ++  
                      
                    } #End nested function createCheckBox   
                
                createCheckBox -name "EV" -label "EventSearch EventLog Helper"       #1  
                createCheckBox -name "SD" -label "SetupDiag.EXE Setup Diagnostics"   #2  
                createCheckBox -name "WU" -label "Get-WindowsUpdateLog Collection"   #3  
                createCheckBox -name "IP" -label "Network Information"               #4  
                createCheckBox -name "PW" -label "POWERCFG. Sleep & Battery Info"    #5  
                createCheckBox -name "GP" -label "GPResult Info"                     #6  
                createCheckBox -name "MS" -label "General Machine Info"              #7  
                createCheckBox -name "EO" -label "EventSearch Out-GridView"          #8            
                     
                #Checkbox State Changes               
                $Global:checkBox[1].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[1].checked -eq $True){ $Global:EventsCollect = $true ; Write-Host "." -nonewline} Else{ $Global:EventsCollect = $false }  
                                  
                        })             
                $Global:checkBox[2].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[2].checked -eq $True){ $Global:SetupDiagCollect = $true ; Write-Host "." -nonewline} Else{ $Global:SetupDiagCollect = $false }  
                                  
                        })  
                $Global:checkBox[3].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[3].checked -eq $True){ $Global:UpdatesCollect = $true ; Write-Host "." -nonewline} Else{ $Global:UpdatesCollect = $false }  
                                  
                        })  
                $Global:checkBox[4].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[4].checked -eq $True){ $Global:WLANCollect = $true ; Write-Host "." -nonewline} Else{ $Global:WLANCollect = $false }  
                                  
                        })  
      
                $Global:checkBox[5].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[5].checked -eq $True){ $Global:PowerCollect = $true ; Write-Host "." -nonewline} Else{ $Global:PowerCollect = $false }  
                                  
                        })  
                $Global:checkBox[6].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[6].checked -eq $True){ $Global:GPCollect = $true ; Write-Host "." -nonewline} Else{ $Global:GPCollect = $false }  
                                  
                        })  
                $Global:checkBox[7].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[7].checked -eq $True){ $Global:miscCollect = $true ; Write-Host "." -nonewline} Else{ $Global:miscCollect = $false }  
                                  
                        })  
      
                 $Global:checkBox[8].Add_CheckStateChanged(  
                        {   
                            if($Global:checkBox[8].checked -eq $True){ $Global:eventOut = $true ; $Global:checkBox[1].checked = $true; Write-Host "x" -nonewline} Else{ $Global:eventOut = $false }  
                                  
                        })  
                                               
            $Global:checkBox[8].Checked = $false  
            $mainText = New-Object System.Windows.Forms.Label  
            $mainText.Location = New-Object System.Drawing.Point(62,30)  
            $mainText.Size = New-Object System.Drawing.Size(260,20)  
            $mainText.Text = 'Choose which logs to collect:'  
            $Global:form.Controls.Add($mainText)  
            $result = $Global:form.ShowDialog()  
            SLEEP 1  #testing Topmost lag  
            $Global:form.Topmost = $true  
      
            #OK Button ...   
            if ($result -eq [System.Windows.Forms.DialogResult]::OK)  
            {  
                $x = $textBox.Text  
                $x  
            }       
      
        } #End function checkBoxes  
      
      
    Function werHint  
    {  
        $WERs = Get-ChildItem $tempDir\LOGS\WER\*.wer -Recurse  
      
        $WERArray = @()  
      
        $Date = $WERs | Select-String -pattern "eventtime=" | % {$_ -Replace("C:.*EventTime=", "")}  
        $eventType = $WERs | Select-String -pattern "EventType=" | % {$_ -Replace("C:.*EventType=", "")}  
        $Sig0Nam = $WERs | Select-String -pattern "Sig\[0\].Name" | % {$_ -Replace("C:.*Sig\[0\].Name=", "")}  
        $Sig0Val = $WERs | Select-String -pattern "Sig\[0\].Value" | % {$_ -Replace("C:.*Sig\[0\].Value=", "")}  
        $Sig3 = $WERs | Select-String -pattern "Sig\[3\].Value" | % {$_ -Replace("C:.*Sig\[3\].Value=", "")}  
        $Sig3 = $WERs | Select-String -pattern "Sig\[3\].Value" | % {$_ -Replace("C:.*Sig\[3\].Value=", "")}  
        $Sig4 = $WERs | Select-String -pattern "Sig\[4\].Value" | % {$_ -Replace("C:.*Sig\[4\].Value=", "")}  
      
        #ConvertDateTime  
        $epoch = [datetime]"01/01/1601 00:00"  
        $date = $date | foreach{$epoch.AddSeconds($_/10000000)}   
        $convertedDate = foreach($Date in $Date) {Get-Date $Date -Format G}  
      
        $WERarray = 0..($convertedDate.Length -1) | Select-Object @{n="Id";e={$_}},   
            @{n="Date";e={$convertedDate[$_]}}, @{n="EventType";e={$eventType[$_]}},  
                @{n="S0-Name";e={$Sig0Nam[$_]}}, @{n="S0-Value";e={$Sig0Val[$_]}}, @{n="S3";e={$Sig3[$_]}},   
                    @{n="S4";e={$Sig4[$_]}}  
      
        $WERArray |Sort-Object -Descending Date | ft -autosize Date, EventType, S0-Name, S0-Value, S3, S4  |   
            Out-File $tempDir\LOGS\WER-SUMMARY.TXT -Width 500  
      
    } ## End Function werHint  
      
      
      
    ### FUNCTIONS_INIT ###   
      
            $Script:Cancel = @{}  
      
            StartScript #function  
            checkBoxes  
              
            ## SetupDiagCollect   #2  
            if($Global:SetupDiagCollect -eq $True)  
                {  
                SetupDiagFunc #function & job   
                wh "...`n"  
                }  
            ## EventSearch         #1  
            if($Global:EventsCollect -eq $True)  
                {  
                EventSearch #function & job  
                wh "...`n"  
                }  
      
            ## Get-WindowsUpdate   #3  
            if($Global:UpdatesCollect -eq $True)  
                {  
                GetUpdates #function & job  
                wh "...`n`n"  
                }  
      
            ## WLAN/Wifi Collect    #4  
            if($Global:WLANCollect -eq $True)      
                {  
                bingCollect #function  
                wh "...`n"  
                showWLAN #function & job   
                wh "...`n"  
                smbConfig #function  
                }  
      
            ## Power/Battery Collect:#5  
            if($Global:PowerCollect -eq $True)  
                {  
                powerCFGInfo #function - make job takes a min  
                wh "...`n"  
                }  
      
            ## GPRESULT Collection:  #6  
            if($Global:GPCollect -eq $True)  
                {  
                getGPRESULT #function  
                wh "...`n"  
                }  
      
            ## Misc Logs Collection: #7        
            if($Global:miscCollect -eq $True)  
                {  
                getMSINFO #function & job  
                    wh "...`n"  
                PrinterCheck #function  
                    wh "...`n"  
                getProcesses #function  
                    wh "...`n"  
                getApps #function - make job - takes a min  
                    wh "...`n"  
                SetupLogs #function  
                    wh "...`n"       
                sysProductCheck #function  
                    wh "...`n"                 
                reservedCheck #function  
                    wh "...`n"  
                fltmcCheck #function  
                    wh "...`n"  
                getDXDiag #function  
                    wh "...`n"  
                regLang #function  
                    wh "...`n"  
                autoRotate #function  
                getMISCLogs #function  
                    wh "...`n"  
                getDrivers #function  
                    wh "...`n"   
                getAV #function  
                    wh "...`n"            
                 }  
            
      
    #### RECEIVING JOBS SECTION ###...   
      
            #EventSearchJob  
            if($Global:EventsCollect -eq $True)  
            {          
                wh "`nWaiting for EventSearchJob to complete...`n"  
      
                Receive-Job -Name EventSearchJob -OutVariable eventSearch -Wait   
                $search = $eventSearch.Line  
            }  
      
      
            if($Global:SetupDiagCollect -eq $True)  
            {  
                #SetupDiagJob - Receive-Job  
                $stamp = (Get-Date -format "hh:mm tt")  
                wh "`nWaiting for SetupDiagJob to complete..."  
                wh "`nTime Stamp: $stamp"  
                wh "`nThis can take up to 10 minutes ..."  
      
                Do{  
                  SLEEP 15  
                    wh "."  
                    if((Get-Job -name SetupDiagJob).State -eq "Completed")  
                        { Receive-Job -Name SetupDiagJob  
                               wh "`nSetupDiag Completed!"                         
                            Break                      }  
                                    }Until($Cancel.SetupDiag -eq $True)  
                wh `n  
                                                   
                #Receive file and copy  
                Receive-Job -Name SetupDiagJob -Wait   
                Copy-Item $tempDir\Logs*.zip $tempDir\LOGS\SetupDiag-Log.zip  
                Copy-Item $tempDir\setupdiag*.log $tempDir\LOGS\  
                Remove-Item $tempDir\Logs*.zip  
            }  
      
           
            if($Global:UpdatesCollect -eq $True)  
            {  
                #GetUpdates Job via:  
                #UpdateHelper <--- GetUpdates Job has to finish first!  
                #Checking Status of GetUpdates Job...  
                wh "Checking Status of GetUpdates Job...`n"  
                If ((Get-Job -Name GetUpdates).State -eq "Failed")  
                    { wh "`nGetUpdates Job Failed!`n" }  
                        Else{  
                                Receive-Job -Name GetUpdates -wait  
                                Move $env:USERPROFILE\Desktop\WindowsUpdate.log $TempDir\LOGS\Windows-Update.log -Force  
                                wh "`n Writing Update Helper Info to UPDATE-ERRORS.TXT ... `n"  
                                UpdateHelper #run the update helper function  
                            }               
            } #End getting GetUpdates-job       
      
            #Finishing EventSearch  
            if($Global:EventsCollect -eq $True)  
                {  
                    writeSearch #function  
                }  
      
    #Wait on MSINFO...  
    if($Global:miscCollect -eq $True)  
    {  
        wh "`n Waiting for MSINFO32 to Complete ...`n"  
        do{ start-sleep 1 }  
        Until((get-process | select-string -Pattern "msinfo").Pattern -cne "msinfo")  
            werHint #function  
    }  
      
      
    if((Get-Host).Version.Major -cge 5) ##WIN7 Does not Support Transcript  
        {  
      
    Stop-Transcript   
      
            do{  
        start-sleep 1  
        }  
        Until((get-item $tempDir\LOGS\Event-Search.TXT).Length -cne 0)  
          
        }  
      
    wh "`nLog Collection Completed! `nLogs are available in %temp%\LOGS\`n"    
    wh "`nHit Any Key or Close ...`n"  
      
    Start-Sleep 1  
      
    Start Explorer.exe $explore  
      
    PAUSE  
      
    ## LOGS.PS1 1.6.3  ##     
    ## JOHNEM 8-2019 ##   
    ## EOF ##


    Click ok
    It typically takes up to 15 minutes to run.
    Click Enter to continue.
    A new file explorer box should appear with title logs.
    Right click on the desktop and create a new folder named logs1 13 2020.
    Highlight all entries in the file explorer box and copy and paste to the desktop folder.
    Right click on the desktop folder > send to compressed zip folder > post a share link into the thread using one drive, drop box, or google drive

    Upload a new V2 into the thread.
      My Computer


  4. Posts : 23
    Windows 10 (64bit)
    Thread Starter
       #44
      My Computer


  5. Posts : 40,988
    windows 10 professional version 1607 build 14393.969 64 bit
       #45

    Please use a non rar option.

    Also if size permits see if you can upload into the post.
      My Computer


  6. Posts : 23
    Windows 10 (64bit)
    Thread Starter
       #46

    Sorry, the file is 12mb so it can't be uploaded

    Dropbox - logs1 13 2020.zip - Simplify your life
      My Computer


  7. Posts : 40,988
    windows 10 professional version 1607 build 14393.969 64 bit
       #47

    Were you able to run the PS command?
    Somehow I'm only seeing V2 results.

    Please upload V2 directly into this thread and post a new share link for just the PS command results.
      My Computer


  8. Posts : 23
    Windows 10 (64bit)
    Thread Starter
       #48

    Those logs were produced by the script you gave, yes :)
      My Computer


  9. Posts : 40,988
    windows 10 professional version 1607 build 14393.969 64 bit
       #49

    Ok.
    Please upload a new V2 directly into the thread.
      My Computer


  10. Posts : 23
    Windows 10 (64bit)
    Thread Starter
       #50
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:29.
Find Us




Windows 10 Forums