Unable to Update Windows 10 to Feature Update , Version 1903


  1. Posts : 12
    Windows 10 Home
       #1

    Unable to Update Windows 10 to Feature Update , Version 1903


    I have been having problem updating the Windows 10 Home to version 1903, after several attempts.


    1. Using Windows Update I tried updating to 1903 number of time and it resulted in error 0x80070070, though i have around 9GB before proceeding to installation and used a external storage USB drive with 16GB free space.
    2. I ran CHKDSK and it found and fixed errors.


    3. Ran DISM tool and showed no corruption.

    4. Ran Windows Troubleshooter.

    5. I since have tried using Windows 10 Update Assistant or Windows Update, it downloads the update and when it starts to apply update it doesn't move become 0% and it rollbacks. The error which shows up is 0x80070070.

    I am using Teclast Tbook 10 ID:E8N8, Processor : Intel Atom x5-Z8300 [email protected] with Installed RAM: 4GB with Windows 10 Home, Version 1803 and OS Build: 17134.1006

    Help in this would be welcomed.
      My Computer


  2. Posts : 6,963
    windows 10
       #2

    Welcome to the forum. Do you have a folder windows.old on c your problem is likley to be no enought space if you have a windows old that can be many gigs
      My Computer


  3. Posts : 39,994
    windows 10 professional version 1607 build 14393.969 64 bit
       #3

    As Samuria posted this error code is typically seen when there is insufficient space.

    There can be other error codes that appear after fixing space problems.

    When performing Windows upgrades that have upgrade problems it is better to perform upgrades using a windows 10 iso to get a more elaborate error code.

    0xC190020e
    0x80070070 - 0x50011
    0x80070070 - 0x50012
    0x80070070 - 0x60000

    These errors indicate the computer does not have enough free space available to install the upgrade.
    To upgrade a computer to Windows 10, it requires 16 GB of free hard drive space for a 32-bit OS, and 20 GB for a 64-bit OS. If there is not enough space, attempt to free up drive space before proceeding with the upgrade.


    Note: If your device allows it, you can use an external USB drive for the upgrade process.
    Windows setup will back up the previous version of Windows to a USB external drive.
    The external drive must be at least 8GB (16GB is recommended).
    The external drive should be formatted using NTFS.
    Drives that are formatted in FAT32 may run into errors due to FAT32 file size limitations.
    USB drives are preferred over SD cards because drivers for SD cards are not migrated if the device does not support Connected Standby.
    https://docs.microsoft.com/en-us/win...ion-procedures

    Find a flash drive that you can format (>.or = 8 GB)

    https://www.microsoft.com/en-us/soft...load/windows10
    Download Windows 10 ISO File
    Create Bootable USB Flash Drive to Install Windows 10
    Free up space:
    Free Up Drive Space in Windows 10


    Upgrade checklist:

    Code:
    UPGRADE CHECK LIST:
    Run through this check list before the next upgrade attempt:
    
    1) remove nonessential hardware
    docks
    USB devices
    printers
    headset
    speakers
    joysticks
    projectors
    scanners
    plotters
    portable optical drives (CD, DVD)
    microphones
    cameras
    webcams
    smartphones
    bluetooth devices
    USB drives (other than a windows 10 iso if used for the upgrade)
    USB Wireless Mouse or Keyboard Receiver, USB Wireless Network Card
    secondary monitors
    
    
    2) These should be the only attached devices:
    wired mouse
    wired keyboard
    monitor
    
    Any of these that have been done in the past week are not necessary to repeat:
    
    
    3) open administrative command prompt and type or copy and paste: (repair file system)
    chkdsk /r /v 
    This may take many hours so plan to run overnight
    Find the chkdsk report in the event viewer using the information in this link and post into the thread:
    Read Chkdsk Log in Event Viewer in Windows 10 Performance Maintenance Tutorials
    https://www.tenforums.com/tutorials/40822-read-chkdsk-log-event-viewer-windows-10-a.html 
    
    4) open administrative command prompt and copy and paste: (repair operating system)
    sfc /scannow 
    dism /online /cleanup-image /restorehealth 
    When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
    
    5) update windows (have all recommended updates installed) and reboot after updates
    
    6) List and uninstall all non-Microsoft antivirus software
    (This includes always on and manual software.)
    (This includes running the applicable antivirus uninstall tools for any AV that could have been incompletely uninstalled)
    
    7) List and uninstall all non-Microsoft firewall software
    
    8) List all Microsoft and non-Microsoft drive encryption software. 
    Uninstall all non-Microsoft disk encryption software
    
    If the drive is encrypted and installation failed in the SAFE_OS phase with an error during BOOT operation > decrypt the drive
    https://www.ghacks.net/2015/11/19/fix-the-instalboot-operation/
    
    9) Run disk cleanup to clean temporary and system files
    
    10) Verify that the drive has > 30 GB free space (At least 25 GB is needed for creating dumps)
    
    11) Place the computer in clean boot:
    https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows
    How to perform a Clean Boot in Windows 10 - TechNet Articles - United States (English) - TechNet Wiki
    https://social.technet.microsoft.com/wiki/contents/articles/29876.how-to-perform-a-clean-boot-in-windows-10.aspx
    https://www.tenforums.com/tutorials/41804-perform-clean-boot-windows-10-troubleshoot-software-conflicts.html
    
    
    12) Detach all SATA devices other than the disk drive that has the Windows operating system
    (Make sure that the only disk drive that is attached to the computer at the time of the upgrade attempt is the disk drive containing Windows)
    (Other disk drives may be able to be detached by disconnecting cables or if necessary to remove the drive from the computer)
    
    13) Make sure that there is no metered connection:  https://support.microsoft.com/en-us/help/17452/windows-metered-internet-connections-faq
      My Computer


  4. Posts : 338
    Windows 10 Pro 64-Bit
       #4

    after making sure you have plenty of hard drive space to upgrade to the 1903 edition, try again, if it wont work, then maybe a refresh upgrade might help; this will take a while to do, as you're downloading a full ISO of the 1903 edition, but there's two ways of doing this

    #1: Use the Media Creation Tool to upgrade your 1803 windows 10 to 1903 by two given options: "In-place Upgrade" which downloads all the needed windows 10 files then gives you the choice on how you want to do this refresh upgrade

    #2: Go to the techbench website and select windows (final) for type, "windows 10 version 1903" as the version, windows 10 as edition, selecting whichever language is your preferred choice, and either the 32-bit iso or 64-bit iso as the final choice, then just save to desktop, and mount the iso file and run the setup and do how you want to do

    just one question on this: is this a tablet, or a laptop, as im having a bit of a problem distinguishing between the two; mainly if its a laptop, I highly recommend you upgrade the ram to more than 4 GB for the 64-bit option, or stick with what you got for the 32-bit option
      My Computer


  5. Posts : 12
    Windows 10 Home
    Thread Starter
       #5

    Samuria said:
    Welcome to the forum. Do you have a folder windows.old on c your problem is likley to be no enought space if you have a windows old that can be many gigs
    Thanks Samurai for taking your time to read my problems. I don't have the folder window.old on my c drive. The folders are Windows, Windows10Upgrade, $WINDOWS.~BT. Basically it's a Tablet with Dual boot OS Android & Windows 10 Home and Windows 10 came preinstalled in this Tablet, which was upgraded till 1803.
      My Computer


  6. Posts : 39,994
    windows 10 professional version 1607 build 14393.969 64 bit
       #6

    1) Open disk management > by default some columns are compressed > widen each Status and Volume > make sure the contents within the parenthesis are in full view and that none of the characters are cutoff > view disk 0 > widen this row as needed so that all of the characters are in full view > post an image into the thread
    Disk Management - How to Post a Screenshot of
    Disk Management - How to Post a Screenshot of

    2) Download and install: Minitool partition wizard
    MiniTool Partition Wizard Free Edition - Free download and software reviews - CNET Download.com
    MiniTool Partition Wizard Free Edition - Free download and software reviews - CNET Download.com
    Click on launch application > post images into the thread

    3) There are log collectors used in another forum room.
    Run each V2 and DM and upload results into this thread:
    BSOD - Posting Instructions

    4) Open administrative command prompt and type or copy and paste:
    5) sfc /scannow
    6) dism /online /cleanup-image /scanhealth
    7) dism /online /cleanup-image /restorehealth
    8) sfc /scannow
    9) chkdsk /scan
    10) wmic recoveros set autoreboot = false
    11) wmic recoveros set DebugInfoType = 7
    12) bcdedit /enum {badmemory}

    13) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
      My Computer


  7. Posts : 12
    Windows 10 Home
    Thread Starter
       #7

    BrokenDaily said:
    after making sure you have plenty of hard drive space to upgrade to the 1903 edition, try again, if it wont work, then maybe a refresh upgrade might help; this will take a while to do, as you're downloading a full ISO of the 1903 edition, but there's two ways of doing this

    #1: Use the Media Creation Tool to upgrade your 1803 windows 10 to 1903 by two given options: "In-place Upgrade" which downloads all the needed windows 10 files then gives you the choice on how you want to do this refresh upgrade

    #2: Go to the techbench website and select windows (final) for type, "windows 10 version 1903" as the version, windows 10 as edition, selecting whichever language is your preferred choice, and either the 32-bit iso or 64-bit iso as the final choice, then just save to desktop, and mount the iso file and run the setup and do how you want to do

    just one question on this: is this a tablet, or a laptop, as im having a bit of a problem distinguishing between the two; mainly if its a laptop, I highly recommend you upgrade the ram to more than 4 GB for the 64-bit option, or stick with what you got for the 32-bit option
    I will be following your steps #1 & #2 as suggested and update you on the results.

    Regarding the last points about the device. It's a dual booting tablet with Android and Windows 10 Home installed in it, so the possibilities of upgrading the memory on it is quite limited. It do support adding of TF card (SD card) and external storage device via Micro USB which I am using to extent the storage space required for performing the update. It came preinstalled with Windows 10 Home 64-bit version.

    Thanks for taking your time to suggest.

    - - - Updated - - -

    zbook said:
    1) Open disk management > by default some columns are compressed > widen each Status and Volume > make sure the contents within the parenthesis are in full view and that none of the characters are cutoff > view disk 0 > widen this row as needed so that all of the characters are in full view > post an image into the thread
    Disk Management - How to Post a Screenshot of
    Disk Management - How to Post a Screenshot of

    2) Download and install: Minitool partition wizard
    MiniTool Partition Wizard Free Edition - Free download and software reviews - CNET Download.com
    MiniTool Partition Wizard Free Edition - Free download and software reviews - CNET Download.com
    Click on launch application > post images into the thread

    3) There are log collectors used in another forum room.
    Run each V2 and DM and upload results into this thread:
    BSOD - Posting Instructions

    4) Open administrative command prompt and type or copy and paste:
    5) sfc /scannow
    6) dism /online /cleanup-image /scanhealth
    7) dism /online /cleanup-image /restorehealth
    8) sfc /scannow
    9) chkdsk /scan
    10) wmic recoveros set autoreboot = false
    11) wmic recoveros set DebugInfoType = 7
    12) bcdedit /enum {badmemory}

    13) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

    1)Disc Management Screenshot

    Unable to Update Windows 10 to Feature Update , Version 1903-disc-management-screenshot.png

    2) Mini Partition Screenshot


    Unable to Update Windows 10 to Feature Update , Version 1903-minitools-screenshot.png

    3) Log Collectors logs V2 & DM

    Log files - Google Drive

    4-13) logs of the steps

    Code:
    Microsoft Windows [Version 10.0.17134.1006]
    (c) 2018 Microsoft Corporation. All rights reserved.
    
    C:\WINDOWS\system32>sfc /scannow
    
    Beginning system scan.  This process will take some time.
    
    Beginning verification phase of system scan.
    Verification 100% complete.
    
    Windows Resource Protection did not find any integrity violations.
    
    C:\WINDOWS\system32>dism /online /clean-image /scanhealth
    
    Deployment Image Servicing and Management tool
    Version: 10.0.17134.1
    
    Image Version: 10.0.17134.1006
    
    
    Error: 87
    
    The clean-image option is unknown.
    For more information, refer to the help by running DISM.exe /?.
    
    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
    
    C:\WINDOWS\system32>dism /?
    
    Deployment Image Servicing and Management tool
    Version: 10.0.17134.1
    
    
    DISM.exe [dism_options] {Imaging_command} [<Imaging_arguments>]
    DISM.exe {/Image:<path_to_offline_image> | /Online} [dism_options]
             {servicing_command} [<servicing_arguments>]
    
    DESCRIPTION:
    
      DISM enumerates, installs, uninstalls, configures, and updates features
      and packages in Windows images. The commands that are available depend
      on the image being serviced and whether the image is offline or running.
    
    
    GENERIC IMAGING COMMANDS:
    
      /Split-Image            - Splits an existing .wim file into multiple
                                read-only split WIM (SWM) files.
      /Apply-Image            - Applies an image.
      /Get-MountedImageInfo   - Displays information about mounted WIM and VHD
                                images.
      /Get-ImageInfo          - Displays information about images in a WIM, a VHD
                                or a FFU file.
      /Commit-Image           - Saves changes to a mounted WIM or VHD image.
      /Unmount-Image          - Unmounts a mounted WIM or VHD image.
      /Mount-Image            - Mounts an image from a WIM or VHD file.
      /Remount-Image          - Recovers an orphaned image mount directory.
      /Cleanup-Mountpoints    - Deletes resources associated with corrupted
                                mounted images.
    
    WIM COMMANDS:
    
      /Apply-CustomDataImage  - Dehydrates files contained in the custom data image.
      /Capture-CustomImage    - Captures customizations into a delta WIM file on a
                                WIMBoot system. Captured directories include all
                                subfolders and data.
      /Get-WIMBootEntry       - Displays WIMBoot configuration entries for the
                                specified disk volume.
      /Update-WIMBootEntry    - Updates WIMBoot configuration entry for the
                                specified disk volume.
      /List-Image             - Displays a list of the files and folders in a
                                specified image.
      /Delete-Image           - Deletes the specified volume image from a WIM file
                                that has multiple volume images.
      /Export-Image           - Exports a copy of the specified image to another
                                file.
      /Append-Image           - Adds another image to a WIM file.
      /Capture-Image          - Captures an image of a drive into a new WIM file.
                                Captured directories include all subfolders and
                                data.
      /Get-MountedWimInfo     - Displays information about mounted WIM images.
      /Get-WimInfo            - Displays information about images in a WIM file.
      /Commit-Wim             - Saves changes to a mounted WIM image.
      /Unmount-Wim            - Unmounts a mounted WIM image.
      /Mount-Wim              - Mounts an image from a WIM file.
      /Remount-Wim            - Recovers an orphaned WIM mount directory.
      /Cleanup-Wim            - Deletes resources associated with mounted WIM
                                images that are corrupted.
    
    FFU COMMANDS:
    
      /Capture-Ffu            - Captures a physical disk image into a new FFU file.
      /Apply-Ffu              - Applies an .ffu image.
      /Split-Ffu              - Splits an existing .ffu file into multiple read-only
                                split FFU files.
    
    IMAGE SPECIFICATIONS:
    
      /Online                 - Targets the running operating system.
      /Image                  - Specifies the path to the root directory of an
                                offline Windows image.
    
    DISM OPTIONS:
    
      /English                - Displays command line output in English.
      /Format                 - Specifies the report output format.
      /WinDir                 - Specifies the path to the Windows directory.
      /SysDriveDir            - Specifies the path to the system-loader file named
                                BootMgr.
      /LogPath                - Specifies the logfile path.
      /LogLevel               - Specifies the output level shown in the log (1-4).
      /NoRestart              - Suppresses automatic reboots and reboot prompts.
      /Quiet                  - Suppresses all output except for error messages.
      /ScratchDir             - Specifies the path to a scratch directory.
    
    For more information about these DISM options and their arguments, specify an
    option immediately before /?.
    
      Examples:
        DISM.exe /Mount-Wim /?
        DISM.exe /ScratchDir /?
        DISM.exe /Image:C:\test\offline /?
        DISM.exe /Online /?
    
    
    
    C:\WINDOWS\system32>dism /online /?
    
    Deployment Image Servicing and Management tool
    Version: 10.0.17134.1
    
    Image Version: 10.0.17134.1006
    
    
    The following commands may be used to service the image:
    
    OS UNINSTALL SERVICING COMMANDS:
    
      /Set-OSUninstallWindow  - Sets the OS Uninstall Window.
      /Get-OSUninstallWindow  - Gets the OS Uninstall Window.
      /Remove-OSUninstall     - Remove the OS Uninstall.
      /Initiate-OSUninstall   - Initiates the OS Uninstall
    
    WINDOWS EDITION SERVICING COMMANDS:
    
      /Optimize-Image         - Performs specified configurations to an offline
                                image.
      /Set-ProductKey         - Sets the product key of the offline image.
      /Get-TargetEditions     - Displays a list of Windows editions that an image
                                can be upgraded to.
      /Get-CurrentEdition     - Displays the edition of the current image.
      /Set-Edition            - Upgrades an image to a higher edition.
    
    DEFAULT ASSOCIATIONS COMMANDS:
    
      /Remove-DefaultAppAssociations - Removes the default application associations
                                from a Windows image.
      /Import-DefaultAppAssociations - Imports a set of default application
                                associations to a Windows image.
      /Get-DefaultAppAssociations - Displays the list of default application
                                associations from a Windows image.
      /Export-DefaultAppAssociations - Exports the default application associations
                                from a running operating system.
    
    PROVISIONING PACKAGE SERVICING COMMANDS:
    
      /Get-ProvisioningPackageInfo - Gets the information of provisioning package.
      /Add-ProvisioningPackage - Adds provisioning package.
    
    APPX SERVICING COMMANDS:
    
      /Optimize-ProvisionedAppxPackages - Optimizes provisioned appx footprint by
                                hard-linking identical files across appx packages.
      /Set-ProvisionedAppxDataFile - Places custom data into the specified app
                                package (.appx or .appxbundle). The specified
                                application package must already be in the image.
      /Remove-ProvisionedAppxPackage - Removes app packages (.appx or .appxbundle)
                                from the image. App packages will not be installed
                                when new user accounts are created.
      /Add-ProvisionedAppxPackage - Adds app packages (.appx or .appxbundle) to the
                                image and sets them to install for each new user.
      /Get-ProvisionedAppxPackages - Displays information about app packages
                                (.appx or .appxbundle) in an image that are
                                set to install for each new user.
    
    UNATTEND SERVICING COMMANDS:
    
      /Apply-Unattend         - Applies an unattend file to an image.
    
    DRIVER SERVICING COMMANDS:
    
      /Remove-Driver          - Removes driver packages from an offline image.
      /Add-Driver             - Adds driver packages to an offline image.
      /Get-DriverInfo         - Displays information about a specific driver
                                in an offline image or a running operating system.
      /Get-Drivers            - Displays information about all drivers in
                                an offline image or a running operating system.
      /Export-Driver          - Export all third-party driver packages from an
                                offline image or a running operating system.
    
    INTERNATIONAL SERVICING COMMANDS:
    
      /Set-LayeredDriver      - Sets keyboard layered driver.
      /Set-UILang             - Sets the default system UI language that is used
                                in the mounted offline image.
      /Set-UILangFallback     - Sets the fallback default language for the system
                                UI in the mounted offline image.
      /Set-UserLocale         - Sets the user locale in the mounted offline image.
      /Set-SysLocale          - Sets the language for non-Unicode programs (also
                                called system locale) and font settings in the
                                mounted offline image.
      /Set-InputLocale        - Sets the input locales and keyboard layouts to
                                use in the mounted offline image.
      /Set-TimeZone           - Sets the default time zone in the mounted offline
                                image.
      /Set-AllIntl            - Sets all international settings in the mounted
                                offline image.
      /Set-SKUIntlDefaults    - Sets all international settings to the default
                                values for the specified SKU language in the
                                mounted offline image.
      /Gen-LangIni            - Generates a new lang.ini file.
      /Set-SetupUILang        - Defines the default language that will be used
                                by setup.
      /Get-Intl               - Displays information about the international
                                settings and languages.
    
    APPLICATION SERVICING COMMANDS:
    
      /Check-AppPatch         - Displays information if the MSP patches are
                                applicable to the mounted image.
      /Get-AppPatchInfo       - Displays information about installed MSP patches.
      /Get-AppPatches         - Displays information about all applied MSP patches
                                for all installed applications.
      /Get-AppInfo            - Displays information about a specific installed MSI
                                application.
      /Get-Apps               - Displays information about all installed MSI
                                applications.
    
    PACKAGE SERVICING COMMANDS:
    
      /Add-Package            - Adds packages to the image.
      /Remove-Package         - Removes packages from the image.
      /Enable-Feature         - Enables a specific feature in the image.
      /Disable-Feature        - Disables a specific feature in the image.
      /Get-Packages           - Displays information about all packages in
                                the image.
      /Get-PackageInfo        - Displays information about a specific package.
      /Get-Features           - Displays information about all features in
                                a package.
      /Get-FeatureInfo        - Displays information about a specific feature.
      /Cleanup-Image          - Performs cleanup and recovery operations on the
                                image.
      /Export-Source          - Export a set of capabilities into a new repository.
      /Add-Capability         - Add one or more capabilities to an image.
      /Remove-Capability      - Remove a capability from one image.
      /Get-Capabilities       - Get capabilities in the image.
      /Get-CapabilityInfo     - Get information of a capability in the image.
    
    For more information about these servicing commands and their arguments,
    specify a command immediately before /?.
    
         Examples:
             DISM.exe /Image:C:\test\offline /Apply-Unattend /?
             DISM.exe /Image:C:\test\offline /Get-Features /?
             DISM.exe /Online /Get-Drivers /?
    
    
    
    C:\WINDOWS\system32>dism /online /cleanup-image /scanhealth
    
    Deployment Image Servicing and Management tool
    Version: 10.0.17134.1
    
    Image Version: 10.0.17134.1006
    
    [==========================100.0%==========================] No component store corruption detected.
    The operation completed successfully.
    
    C:\WINDOWS\system32>dism /online /cleanup-image /restorehealth
    
    Deployment Image Servicing and Management tool
    Version: 10.0.17134.1
    
    Image Version: 10.0.17134.1006
    
    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.
    
    C:\WINDOWS\system32>sfc /scannow
    
    Beginning system scan.  This process will take some time.
    
    Beginning verification phase of system scan.
    Verification 100% complete.
    
    Windows Resource Protection did not find any integrity violations.
    
    C:\WINDOWS\system32>chkdsk /scan
    The type of the file system is NTFS.
    Volume label is Windows.
    
    Stage 1: Examining basic file system structure ...
      526848 file records processed.
    File verification completed.
      16633 large file records processed.
      0 bad file records processed.
    
    Stage 2: Examining file name linkage ...
      26628 reparse records processed.
      593144 index entries processed.
    Index verification completed.
      0 unindexed files scanned.
      0 unindexed files recovered to lost and found.
      26628 reparse records processed.
    
    Stage 3: Examining security descriptors ...
    Security descriptor verification completed.
      33149 data files processed.
    CHKDSK is verifying Usn Journal...
      41619776 USN bytes processed.
    Usn Journal verification completed.
    
    Windows has scanned the file system and found no problems.
    No further action is required.
    
      36655103 KB total disk space.
      27219304 KB in 130903 files.
        100184 KB in 33150 indexes.
             0 KB in bad sectors.
        639159 KB in use by the system.
         50464 KB occupied by the log file.
       8696456 KB available on disk.
    
          4096 bytes in each allocation unit.
       9163775 total allocation units on disk.
       2174114 allocation units available on disk.
    
    C:\WINDOWS\system32>wmic recoveros set autoreboot= false
    Updating property(s) of '\\TECLAST\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk0\\Partition13"'
    Property(s) update successful.
    
    C:\WINDOWS\system32>wmic recoveros set DebugInfoType = 7
    Updating property(s) of '\\TECLAST\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk0\\Partition13"'
    Property(s) update successful.
    
    C:\WINDOWS\system32>bcdedit /enum {badmemory}
    
    RAM Defects
    -----------
    identifier              {badmemory}
    Last edited by Brink; 24 Sep 2019 at 17:13. Reason: code box
      My Computer


  8. Posts : 39,994
    windows 10 professional version 1607 build 14393.969 64 bit
       #8

    1) There are two major problems blocking Windows upgrades:
    a) insufficient drive free space
    b) BSOD

    Once these problems are fixed you can attempt another upgrade.
    If it upgrades you are set.
    If it fails to upgrade new error codes and messages as well as log scanning may find other causes of the failure to uprade.

    2) The free space displayed was 8 -9 GB.

    3)The logs collected data beginning 9/15/2019

    4)During the ten day period there were eight BSOD.
    The first was on 9/17 and the last on 9/23.

    5) Increase the free space on the C: drive.
    Consider modifying partition size for the upgrade so that there is 35 GB free.
    Performance is optimal when there is 15% or more free space and this can be modified after a successful upgrade.

    Code:
    DriveLetter Size (GB) Free (GB) Device Path                                       
    ----------- --------- --------- -----------                                       
    C:              34.96      8.88 \Device\HarddiskVolume13

    Code:
    ------------------------
    Disk & DVD/CD-ROM Drives
    ------------------------
          Drive: C:
     Free Space: 9.1 GB
    Total Space: 35.8 GB
    File System: NTFS
          Model: Toshiba 064GEA


    Free Up Drive Space in Windows 10

    Windows 10 May 2019 Update raises minimum storage requirement | Windows Central
    https://support.microsoft.com/en-us/...feature-update

    6) In the left lower corner search type: system or system control > open system control panel > on the left pane click advanced system settings

    a) > on the advanced tab under startup and recovery > click settings > post an image of the startup and recovery window into the thread

    b) > on the advanced tab under performance > click on settings > on the performance options window > click on the advanced tab > under virtual memory > click on change > post an image of the virtual memory window into the thread


    7) The BIOS: Version/Date INSYDE Corp. tPAD 3.05, 25-06-2016
    Please check to see if this is the most up to date version.

    8) Open the website for the computer or motherboard manufacturer to view the drivers and post a URL or hyperlink into the thread.

    9) Run HD Tune (free version) (all drives)
    HD Tune website
    Post images into the thread for results on these tabs:
    a) Health
    b) Benchmark
    c) Full error scan


    10) Run Sea Tools for Windows
    long generic test
    Post an image of the test result into the thread
    SeaTools for Windows |
    Seagate

    How to use SeaTools for Windows | Seagate Support US
    Last edited by zbook; 24 Sep 2019 at 19:04.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:40.
Find Us




Windows 10 Forums