Feature update W10 v1903 failed to install-This solution WORKED for me Solved


  1. Posts : 13
    W10
       #1

    Feature update W10 v1903 failed to install-This solution WORKED for me


    I lost count of the number of times and different ways I tried to update my W10 v.1809 to W10 v.1903 (the update usually reached 94% and then failed).

    No error message was given, just the message, “Windows 10 installation has failed” along with an OK box. Very helpful.

    sfc /scannow

    could find nothing wrong but chkdsk c: /f /r /x only reached 17% before calling a halt.

    Use sfc /scannow to repair Windows system files:

    Use SFC Scannow to Repair Windows System Files
    From an elevated command prompt (What is an Elevated Command Prompt?) run:

    chkdsk c: /f /r /x

    I also tried many of the suggestions below, all without success:

    FIX: Windows 10 Update 1903 failed to install (Solved) - wintips.org - Windows Tips & How-tos

    Windows 10 May 2019 Update common problems and how to fix them | Windows Central

    Solved: Feature update to Windows 10 version 1903 Failed to Install

    I concluded that my hard drive was corrupted and that there was no alternative but to wipe it and then do a fresh installation of W10 v.1903 from a USB drive.

    Naturally I first backed up all personal data to an external hard drive.

    NB All installed programs will be wiped and will require reinstallation (e.g. Security software, MS Office, Macrium Reflect etc).

    Using Media Creation Tool, I created bootable installation media on a previously formatted (use quick format) USB drive (minimum 8GB):

    Windows 10 Media Creation Tool For Version 1903


    EDIT:

    I first disabled Secure Boot in order to boot in UEFI mode:

    How do I disable UEFI Secure Boot? – Official Avira Support | Knowledgebase & Customer Support | Avira


    However, in BIOS/UEFI the USB drive was not recognised until I selected Legacy Boot.

    I booted the PC with the USB bootable media (in BIOS enable Legacy Boot and set USB-HDD to boot first).

    Click the Next button.

    Click the Install now button.

    Click the Skip button (or click on I don’t have a product key, if you are reinstalling.

    If Windows 10 was already activated, after the installation it will re-activate automatically. Note that W10 is registered to a device, so even if the hard drive is changed the original MS W10 product key will still be recognised.

    Check the I accept the license terms option.

    Click the Next button.

    Select the Custom: Install Windows only (advanced) option.

    Select every partition in the hard drive (Drive 0:) and delete it.

    Warning: Do NOT delete partitions on any other drive.

    Select the hard drive (Drive 0 Unallocated Space) to install Windows 10.
    Click the Next button.

    After the installation, select your region in the first page of the out-of-the-box experience (OOBE).

    Click the Yes button.

    Select your keyboard layout

    Click the Yes button.

    If you’re not setting a second keyboard layout, click the Skip button.

    I recommend not connecting to the internet at this stage. Do it later, especially if you wish to use a Local Account.

    For a Local Account using a username and password (not a Microsoft Account) select “I don’t have Internet” option.

    Choose “continue with a limited setup,” and you can proceed directly to the Local Account setup.

    (If your device is using an Ethernet connection, your device will connect to the network automatically. If you’re using a wireless connection, you’ll need to set up the connection manually).

    Choose additional preferences as required.

    I do hope that this suggestion helps just one person to successfully install W10 v1903 without wasting valuable time and effort.

    Good luck.
    Last edited by Gaius; 3 Weeks Ago at 01:05.
      My ComputerSystem Spec

  2. NavyLCDR's Avatar
    Posts : 11,818
    Windows 10 LTSC
       #2

    In summary:
    Clean install Windows 10

    However, with a properly created USB flash drive there is no need to disable UEFI booting and use legacy BIOS (CSM). A properly created USB flash drive will boot just fine in UEFI mode.
      My ComputerSystem Spec


  3. Posts : 13
    W10
    Thread Starter
       #3

    NavyLCDR,

    The bootable USB drive was properly created using the Media Creation Tool.

    It should have shown up via UEFI boot, but it did not do so for whatever reason.

    As soon as I enabled Legacy Mode the USB drive appeared and booted successfully as a UEFI USB drive.
      My ComputerSystem Spec

  4. Bree's Avatar
    Posts : 12,450
    10 Home x64 (1903) (10 Pro on 2nd pc)
       #4

    Gaius said: View Post
    The bootable USB drive was properly created using the Media Creation Tool.
    It should have shown up via UEFI boot, but it did not do so for whatever reason..
    Usually you have to disable Secure Boot in the UEFI settings before you can boot from the install USB in UEFI mode.

    Before you get started installing Windows 10, be sure that you temporarily disable Secure Boot and Fast Boot in your UEFI firmware settings until finished. Some motherboards may not support booting from a USB flash drive while these settings are enabled.
    Clean Install Windows 10
      My ComputersSystem Spec


  5. Posts : 13
    W10
    Thread Starter
       #5

    Bree,
    You are correct.
    I had omitted to say that Secure Boot had been disabled.
    I have edited my original post accordingly.
    Thanks.
      My ComputerSystem Spec


 

Related Threads
I've finally solved the problem preventing me from updating my Dell Inspiron 7537 laptop from Windows 8.1 Home to Windows 10 as described in https://www.tenforums.com/installation-setup/30191-something-happened-what-next-2.html. The installation...
Latest Update to v1903 Hangs a 7% Install in Windows Updates and Activation
Using a Dell Inspiron15 3000-3552, Windows 10, 64-but, v1809 build 17763.557. I attempted to update from 1809 to 1903 via normal update and the download took forever, then it just it just stuck on 7% during install. I reset the update and thank...
Received this message in the update history. The full message was: Feature update to Windows 10, version 1809 amd64 2019-04 Failed to install on ‎4/‎15/‎2019 - 0x80240034 I can't tell what update failed to install. Any thoughts would be...
Hello people, I m using windows 10 pro and i m unable to install windows 10 creator update version 1703 since its release daily its start downloading itself and at the end it says update failed to install i lost too much data i m fearing about cost...
1607 Feature Update failed in Windows Updates and Activation
After getting my new laptop a couple months ago, I decided not to do do Windows Updates for fear of encountering the problems of the Anniversary Update that were reported. Now I heard that a fix was finally included and decided to go ahead and...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:28.
Find Us