bcdedit and BIOS disk order, how do I setup multibooting?

Page 1 of 8 123 ... LastLast
  1.    #1

    bcdedit and BIOS disk order, how do I setup multibooting?

    I have 4 SSDs in the UEFI machine, 2 of them have are bootable with Win10 on them and 1 has bootable Linux.

    The primary boots just fine. I cloned the primary onto the clone SSD with Macrium and created a bcdedit entry for it. When the machine boots and I select the clone Win10 drive, it does not boot.

    I have to go into the BIOS and change the drive order under BIOS/Boot. Not of the multiple devices like CDROM, flash but of the disks themselves. Then the clone Windows 10 boots just fine. But the primary Win10 no longer boots. I have to rearrange the disk order under BIOS again to get my primary disk to boot again. Then the clone stops booting.

    and under BIOS/boot/disks I have 2 entries per each disk. I think it has retained some of my previous BCD entries maybe.

    To confuse this further, the primary and clone Win10 disks are the same model, so here are 4 entries that look exactly the same and I have to select one until I find the one that works. I usually get it on the 1st try.

    I run EasyBCD and it shows no redundant entries.

    I can run bcdedit /enum all but cannot figure out which entries are false. This multiboot scheme used to work and recently broke down and I cannot figure where the disconnect it.
      My ComputerSystem Spec

  2.    #2

    I am not really an expert on this, but I do have two SSD's, both containing W10 pro, in a dual boot. My disks are mbr.
    I set EasyBCD in each Windows (donot know whether that is necessary) and unchecked "use Metro bootloader". When the Bios screen starts up, it presents the selection option which Windows to start up. What happens in your case of non-booting? Nothing or error message?
      My ComputerSystem Spec

  3.    #3

    The problem may be that windows writes a disk signature to every hard drive if you clone it you have 2 with the same signature so windows can't tell which disk is which
      My ComputerSystem Spec

  4.    #4

    this is the error I get until I change the boot order in BIOS.
      My ComputerSystem Spec

  5.    #5

    It used to work then stopped.
    I have to change the boot order in BIOS, as if bcdedit is pointing to the wrong disk. But it's not and disk IDs are unique.
      My ComputerSystem Spec

  6.    #6

    Try the bcdboot command
      My ComputerSystem Spec

  7.    #7

    this is what bcdedit looks like:

    Windows Boot Manager--------------------identifier {bootmgr}description Windows Boot Manager
    locale en-USinherit {globalsettings}default {current}resumeobject {34222f3b-2d98-11e9-9e5a-d8cb8aefea8e}displayorder {2e2e25a7-b0e8-11e9-9f42-806e6f6e6963} {5bca99d5-b0ef-11e9-9f45-806e6f6e6963} {5bca99d7-b0ef-11e9-9f45-806e6f6e6963} {2c4a7087-b01b-11e9-9f39-806e6f6e6963} {56bfddc0-af31-11e9-9f30-806e6f6e6963} {2e2e25a9-b0e8-11e9-9f42-806e6f6e6963} {current} {34222f4c-2d98-11e9-9e5a-d8cb8aefea8e}toolsdisplayorder {memdiag}timeout 9displaybootmenu YesWindows Boot Loader-------------------identifier {current}device partition=Cath \WINDOWS\system32\winload.efidescription Windows 10locale en-USinherit {bootloadersettings}recoverysequence {34222f3e-2d98-11e9-9e5a-d8cb8aefea8e}displaymessageoverride Recoveryrecoveryenabled Yesisolatedcontext Yesallowedinmemorysettings 0x15000075osdevice partition=C:systemroot \WINDOWSresumeobject {34222f3b-2d98-11e9-9e5a-d8cb8aefea8e}nx OptInbootmenupolicy StandardWindows Boot Loader-------------------identifier {34222f4c-2d98-11e9-9e5a-d8cb8aefea8e}device partition=Gath \Windows\system32\winload.efidescription Windows 10 - August 6, 2019locale en-USosdevice partition=G:systemroot \Windowsresumeobject {f2098f89-b9fa-11e9-9f79-806e6f6e6963}
      My ComputerSystem Spec

  8.    #8

    not sure how to get forum to not format it and eat end of line characters.
      My ComputerSystem Spec

  9.    #9

    dictum said: View Post
    not sure how to get forum to not format it and eat end of line characters.
    Put code tags around it.
      My ComputerSystem Spec

  10.    #10

    NavyLCDR said: View Post
    Put code tags around it.
    Example please.
      My ComputersSystem Spec

Page 1 of 8 123 ... LastLast

Related Threads
Can't change BIOS order in Installation and Upgrade
So I'm having a dual boot system (Windows and Ubuntu) and since I disassembled my laptop some hours ago the laptop boots directly into Windows (ignoring the GRUB OS selection screen). I'm having a Lenovo Laptop with Windows 10 (Insider Preview)...
disk cleanup out of order? in Performance & Maintenance
After disk cleanup ran once, files which can be cleaned, seems to increase. And after many runs, files are not completely removed. Is this out of order? 145302 145303
Solved Disk order shown in disk Management in Drivers and Hardware
140970 I read somewhere that the C directory disk should ideally be Disk 0 - as you will see, my three internal disks do not follow this pattern. Do I need to swap the signal leads at the motherboard end to correct this - or does it not really...
BIOS Boot order in AntiVirus, Firewalls and System Security
No way, in the BIOS, to change Boot prioriy. I cannot use a CD to boot from in an emergency. How can this be done? Gigabyte laptop, Windows 10, 64. I cannot disable secure boot, the option will not highlite.
Have a Lenovo H420 desktop that was upgraded about 2 months ago. We backed up everything and want to reinstall Windows 7. But I can find no way to get into the Setup screen. I've gone to Settings, Update & Security, Advanced Startup and Restart...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 04:39.
Find Us