Problem updating from 1809 to 1903

Page 1 of 2 12 LastLast

  1. Posts : 46
    Windows 10. Version 1809. OS Build 17763.134
       #1

    Problem updating from 1809 to 1903


    Hi,

    I’ve been waiting to see when my PC would download the latest version of Windows 10 (1903). I eventually cleared some rubbish I’d collected, made a clone of my C drive onto an external USB SSD using Macrium and went to the MS site to manually download 1903.

    My PC was checked and all appeared OK. I downloaded some files which took ~8 minutes then the PC proceeded to update then I got the message “This PC can’t run Windows 10” and an error – oxc 1900201. This according to Microsoft “…may signify that your PC doesn’t meet the minimum requirements to download or install the upgrade to Windows 10.”

    This Optiplex is ~2 years old, the CPU is an i5-7500 running at 3.4 Ghz, and it has 12 Gb of RAM. There’s plenty of room on the SSD (it’s a 250 Gb and I’m using well under a hundred).

    Is this a one off or a well documented issue with 1903 ?

    Thanks.
      My ComputerSystem Spec

  2.    #2

    Did you still have any USB hard drives connected during download/install?
    There’s a known bug where install will fail with a message saying it’s not compatible when there’s a USB device connected (not mouse or keyboard).
    I had to use the media creation tool & choose to update this PC now.
      My ComputerSystem Spec


  3. Posts : 46
    Windows 10. Version 1809. OS Build 17763.134
    Thread Starter
       #3

    Problem updating from 1809 to 1903


    Thanks Bastet,

    No I didn't have my external usb drive connected.

    I ran sfc and chkdsk earlier today and they ran ok.
      My ComputerSystem Spec

  4.    #4

    Are all drivers up to date?
    Is there any cumulative updates listed under updates?
      My ComputerSystem Spec

  5.    #5

    Hi Taid !

    I also had update problems with Windows Update, impossible to solve: -(

    I used Microsoft's MediaCreatorTool directly to download and update my system which was already in Windows 10 but refused updates.

    It's a little long (downloads all the equivalent of the official DVD) but very effective.

    I have not lost any applications already installed, documents or accounts!

    You can download it here MediaCreationTool

    Choose the Update option when it is proposed.

    But this tool also allows you to create the official ISO for later!

    Unfortunately impossible to do both at the same time, it is necessary to re-download again: -(

    (There may be a trick but I haven't tested it!!!)

    Hopefully this will help you out.

    A+
    Jean-Claude
      My ComputerSystem Spec

  6. Megahertz's Avatar
    Posts : 278
    Windows 7 HP 64 - Windows 10 Pro
       #6

    Witch version you are running on your computer that you wish to update?
    The best way to update is to download the iso file to your computer, mount it and run setup.
    Win10_1903_V1_US_English_x64
    Win10_1903_V1_UK_English_x64
    The links are valid for 24 hours
    Last edited by Megahertz; 2 Weeks Ago at 09:41.
      My ComputerSystem Spec



  7. Posts : 248
    Windows 8.1 Enterprise x64
       #7
      My ComputerSystem Spec

  8.   My ComputerSystem Spec

  9. spapakons's Avatar
    Posts : 2,847
    Windows 10 Pro 64-bit 1803 (April 2018 build 17134.829)
       #9

    Hello!

    I would treat it as an old PC and take the same precautions I would take on an older PC. That is, disable either in BIOS or in Device Manager all not-necessary devices (audio, LAN, Wi-Fi, TV tuner etc) and disconnect any printer and other USB devices. You won't need them until Windows upgrade is complete, so why let Windows try replacing the drivers and mess them? I would also disable all not-critical services and startup applications. Of course I would disable Antivirus (if any) to avoid interrupting the upgrade and causing problems. Then, I would try to manually upgrade to the next build by mounting the ISO (even better extract the files to a folder) and running Setup. Assuming the upgrade completed successfully, I would then enable the devices one-by-one and would install proper drivers (I prefer to avoid Windows Update and manually install latest official OEM drivers). I would then enable the disabled services and startup applications and upgrade any application necessary. Some applications (MS Office, Nero and others) may assume you changed computer and require to activate them again. Good luck.
      My ComputerSystem Spec

  10.    #10

    I have updated from 1803 to 1903 apart from one bsod it took about 2 hours. It works ok but sometimes when I boot, after POST but before windows 'blue window' appears it crashes bsod caused by page fault in non paged area arcctrl.sys (whocrashed). Rebooting it appears OK and this is a random bsod. All drivers are uptodate and device manager looks ok. Has anyone else had this issue.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Dear, I'm trying to update a Windows 10 version 1803 to the latest 1903. The first time I tried I got this error: 236234 I've searched around the internet for a couple of days now and everything I find about this error are driver issues....
A couple of days ago I updated to Windows version 1903. As far as I could tell the update went well. However, I have since found a couple of snags relating to Microsoft OneDrive. Firstly, I noticed that the desktop shortcut icon had changed...
I have been having problems using various methods to update my computer to 1903 I tried using a bootable flash drive and running setup but it said something needed attention. This turned out to be the windows won't install with a flash drive...
Solved My saga of upgrading from Ver. 1809 to 1903 in Installation and Upgrade
This is how I managed to update my Win10/64 system from Ver. 1809 to 1903. My system has an Intel 17-8700 CPU with 16 GB RAM and a 128GB Samsung SSD boot drive installed on an ASUS P8Z77-M motherboard. Before attempting the update I made a complete...
Solved 1809/1903 in General Support
Will I still be eligible for Windows 1903 update seeing as how I never got the 1809 update.?Apparently tried to update 1/1/19 but for some unknown reason failed and no further attempt. Thank You
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:19.
Find Us