Forgot to disconnect HDD before Windows 10 Install

Page 1 of 2 12 LastLast
  1.    #1

    Forgot to disconnect HDD before Windows 10 Install


    I installed Windows 10 on my SSD and failed to disconnect the dam hard drive before doing so. So..now I have my boot drive on the HDD and OP on the SSD which would be no big deal but I can't delete it to access all 6 terabytes ( trying to convert to from mbr to gpt to get full access to the 6tb). If I do a complete reset, will Windows 10 give me a chance again to disconnect the HDD before installing? To clarify, does a fresh reset mean "reset and automatically install Windows" or will the process stop after the reset (like everything was before I posted)? Dam I am pissed I screwed this up but I am new to all this. Thank you
      My ComputerSystem Spec

  2. Caledon Ken's Avatar
    Posts : 15,053
    Windows 10 Pro x64 Build 1809
       #2

    Hi Southern Yankee. Welcome to the TenForums @Southern Yankee

    Rather than messing around I would just use the Media Creation Tool to create current bootable media on an 8GB USB key. Then clean install on SSD with HDD disconnected. I assume the SSD is brand new, you are booting UEFI. If so in the tutorial it recommends deleting all partitions on SSD.

    Clean Install Windows 10

    Then you should be able to deal with HDD. Does the HDD have data on it?


    Ken
      My ComputerSystem Spec

  3.    #3

    Thanks for the response. I have the USB boot drive. The only data on the HDD is what Windows put on it (the boot drive). After the fresh install, I suppose I could clear anything off the hard drive fairly easy (I hope) since it won't be tied to anything.
      My ComputerSystem Spec

  4. Ztruker's Avatar
    Posts : 8,160
    Windows 10 Pro X64 1903 189362.439
       #4

    Where is @NavyLCDR when you need him. He has posted several times how to fix this but I can't find any of the posts right now.
    The process was pretty simple too darn it.

    Maybe he'll see this and pop in.
      My ComputersSystem Spec

  5.    #5

    We will see if he responds. I have the usb boot drive at the ready!
      My ComputerSystem Spec

  6. Caledon Ken's Avatar
    Posts : 15,053
    Windows 10 Pro x64 Build 1809
       #6

    You likely have a fast machine and with nothing on it just do it.

    As to the HDD, since it too is empty. Once the OS is installed on SSD open diskpart. Then ....

    diskpart
    List disk
    select disk 1 (ensure one is your HDD, diskpart is not forgiving, adjust numbering accordingly, your SSD maybe one)
    clean
    Convert gpt
    exit
    exit

    Open Disk management and partition HDD as required.
      My ComputerSystem Spec


  7.    #7

    Excellent thank you. So...Ill shut my computer off after the fresh install (now that every bit of Windows 10 is on my SSD), then hook up the HDD and turn it back on. I will select the SSD as the first boot priority. I really hope that my computer won't find the boot drive on the HDD that is still there (written on there during first install). I kinda wish I could clean the HDD before its hooked back up but all should be well. I suppose I could boot from USB beforehand, and try to delete the hard drive before the fresh install, then unhook the HDD and do the install. I attempted this before in diskpart but without booting from USB and it would not allow me to touch that reserved partition because it contained boot files.
      My ComputerSystem Spec

  8. Caledon Ken's Avatar
    Posts : 15,053
    Windows 10 Pro x64 Build 1809
       #8

    Once you have SSD loaded and it boots just put machine to sleep. Connect HDD, awaken and take action.
      My ComputerSystem Spec

  9.    #9

    Will do very much appreciated
      My ComputerSystem Spec

  10.    #10

    Ztruker said: View Post
    Where is @NavyLCDR when you need him. He has posted several times how to fix this but I can't find any of the posts right now.
    The process was pretty simple too darn it.

    Maybe he'll see this and pop in.
    The basic steps are to shrink the OS partition by 100 MB or so. Create a new primary partition in the new empty space. Format it as FAT32. Assign it a drive letter. Then run the BCDBOOT command such as:

    bcdboot C:\Windows /s t: /f UEFI

    That's assuming you assign drive letter T: to the new FAT32 partition and it is booting in UEFI mode.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Windows 10 log in forgot password in User Accounts and Family Safety
When I log into Windows 10, I have always used a four digit pin. Today the system said my password has expired, and I would need to reset it and then be able to use my pin again. My system is set up as a user account, and not set up with my...
forgot windows log in password in User Accounts and Family Safety
Hi i have this pc i built about a year ago.. it was in storage and finally was able to get it out but now i cant remember the password i created for windows .. im not sure how to go about getting this fixed and would luv to be able to game on...
Forgot local password and can't access Windows in User Accounts and Family Safety
My wife used a local password to log into Win 10, and got a Microsoft account, specifying another password. The next time she booted up, neither her old nor new password was accepted. We don't have a Win 10 CD to fix things, because we downloaded...
Trouble signing into Windows 10 - Forgot password in User Accounts and Family Safety
I am having trouble signing into Windows 10. A few days ago I noticed the system was running slow so I did a reset of Windows 10. When everything was ready to setup again, I set up my user account with my usual password, however, when asked if I...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:21.
Find Us