Anyone Brave Enough To Read My Logs? (1803/1809/1903 (fromWI) Fail Solved

Page 2 of 6 FirstFirst 1234 ... LastLast
  1. Ztruker's Avatar
    Posts : 7,821
    Windows 10 Pro X64 1809 17763.437
       #11

    Hi Peter, haven't seen you around for a long time. Hope all goes well with your surgery.
    Doesn't seem all that long ago you were providing Windows 7 ISO files (or was it Vista) as a service for lots of folks.

    Take care, best of luck.
      My ComputersSystem Spec

  2. Ex_Brit's Avatar
    Posts : 355
    Win7 Ult + Win10 Pro + Win10 Enterprise LTSB - all x64
    Thread Starter
       #12

    It was Vista. Thanks for posting. I had a severe heart attack recently which has knocked me over as far as being busy and on top of that my AMD is getting so bad that it's a strain to even look at a computer screen for too long.
      My ComputerSystem Spec

  3. Ztruker's Avatar
    Posts : 7,821
    Windows 10 Pro X64 1809 17763.437
       #13

    Glad to see you posting when you can and very glad you survived your heart attack.

    My brother who is 90 has AMD so I know how frustrating (from him) that can be.

    Your in good hands with @zbook.

    Take care
      My ComputersSystem Spec

  4. Ex_Brit's Avatar
    Posts : 355
    Win7 Ult + Win10 Pro + Win10 Enterprise LTSB - all x64
    Thread Starter
       #14

    Thanks ;-)
      My ComputerSystem Spec

  5. Ex_Brit's Avatar
    Posts : 355
    Win7 Ult + Win10 Pro + Win10 Enterprise LTSB - all x64
    Thread Starter
       #15

    @zbook - your post #2 is quite a tall order for an oldie like me, but I will try. Forgive me if things are answered in several posts.

    1) What's happening now that you are troubleshooting the failed upgrades? A: I can’t get 1803 or 1809 to install and according to an MVP I talked to, Microsoft are getting very sloppy which is not surprising tome (as an ex-MVP). This is serious because MS themselves ignore reports we send to them and tell us that our “out-of-date” systems are now unsupported, or will be soon. I’m well acquainted with the trouble the 1809 update caused when first issued. MS fixed whatever that was but failed to fix everything.
    2) What troubleshooting steps were done in 2017 and 2018? A: None as Windows had no problems updating as far as 1709
    3) What are the status of the important computer files? backed up? A: I have some backups
    4) Had you considered a clean install or a reset save files? A: I already did that, it didn’t help.

    5) Open disk management > by default columns are compressed > widen each Status and Volume > make sure the contents within the parenthesis are in full view and that none of the characters are cut off > check the contents of the disk 0 row and make sure that none of the characters are cut off > post an image into the thread
    Disk Management - How to Post a Screenshot of | Tutorials

    Click image for larger version. 

Name:	Capture.JPG 
Views:	9 
Size:	282.1 KB 
ID:	231507


    6) Open device manager > click view > click show hidden devices > manually expand all rows > look for any row displaying a yellow triangle with black exclamation mark or unknown device > post images into the thread
    How to Upload and Post Screenshots and Files at Ten Forums | Tutorials A: No yellow triangles or exclamation marks, 1 unknown which is probably because I've missed some old software installation...

    Click image for larger version. 

Name:	CaptureDM.PNG 
Views:	4 
Size:	47.9 KB 
ID:	231509


    7) Uninstall the Canon printer and any other printers A: Done but it’ll have to be reinstalled soon as it’s my only printer and fax machine. It ‘s recent model so fully Win 10 compatible.
    8) Uninstall Mcafee AV using the applicable uninstall tool:
    Antivirus Software, Internet Security, Spyware and Malware Removal | McAfee

    A: As an ex-McAfee forums administrator I can tell you that the big AV companies are very unfairly criticised. That said, it is not installed on either of my Win 10's.


    9) Make sure Windows defender is on A: Confirmed on.

    10) List all non-Microsoft AV software used since the last successful Windows upgrade (always on and manual) only A: Malwarebytes Pro but only on Win 7 and only when I activate it to do a scan.
    11) List all non-Microsoft drive encryption software used since the last successful Windows upgrade A: None

    12) List all non-Microsoft firewall software used since the last successful Windows upgrade A: McAfee only on Win 7, WD on both Win 10's.


    13) Open administrative command prompt and type or copy and paste:
    14) sfc /scannow
    15) dism /online /cleanup-image /restorehealth
    16) wmic recoveros set autoreboot = false
    17) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy & ,paste into the thread

    Microsoft Windows [Version 10.0.16299.1087]
    (c) 2017 Microsoft Corporation. All rights reserved.

    O:\Windows\system32>sfc /scannow

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection did not find any integrity violations.

    O:\Windows\system32>dism /online /cleanup-image /restorehealth

    Deployment Image Servicing and Management tool
    Version: 10.0.16299.15

    Image Version: 10.0.16299.1087

    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.

    O:\Windows\system32>wmic recoveros set autoreboot = false
    Updating property(s) of '\\DESKTOP-5DRPRSR\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Pro|O:\\Windows|\\Device\\Harddisk3\\Partition3"'
    Property(s) update successful.

    O:\Windows\system32>
    18) open administrative command prompt and type or copy and paste: (repair file system chkdsk /r /v
    This may take many hours so plan to run overnight

    C:\WINDOWS\system32>chkdsk /r /v
    The type of the file system is NTFS.
    Cannot lock current drive.

    Chkdsk cannot run because the volume is in use by another
    process. Would you like to schedule this volume to be
    checked the next time the system restarts? (Y/N)

    Type: Y
    reboot

    Did that an found next morning machine powered off (may have vbeen a power interruption so I did it again and this time remotely from Win 7 - took a while but no problems with machine powering down\\

    19) Find the chkdsk report in the event viewer using the information in this link and post into the thread:
    Read Chkdsk Log in Event Viewer in Windows 10 Performance Maintenance Tutorials
    Read Chkdsk Log in Event Viewer in Windows 10 | Tutorials

    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.

    C:\Windows\system32>chkdsk O: v/ r/
    Invalid parameter - v

    C:\Windows\system32>chkdsk O: /v /r
    The type of the file system is NTFS.
    Volume label is Win 10 Professional x64.

    CHKDSK is verifying files (stage 1 of 5)...
    385792 file records processed.
    File verification completed.
    5251 large file records processed.
    0 bad file records processed.
    79574 EA records processed.
    5387 reparse records processed.
    CHKDSK is verifying indexes (stage 2 of 5)...
    475882 index entries processed.
    Index verification completed.
    0 unindexed files scanned.
    0 unindexed files recovered.
    CHKDSK is verifying security descriptors (stage 3 of 5)...
    385792 file SDs/SIDs processed.
    Security descriptor verification completed.
    45046 data files processed.
    CHKDSK is verifying Usn Journal...
    40884368 USN bytes processed.
    Usn Journal verification completed.
    CHKDSK is verifying file data (stage 4 of 5)...
    385776 files processed.
    File data verification completed.
    CHKDSK is verifying free space (stage 5 of 5)...
    64363521 free clusters processed.
    Free space verification is complete.
    Windows has checked the file system and found no problems.

    357847842 KB total disk space.
    99753392 KB in 192958 files.
    134696 KB in 45047 indexes.
    0 KB in bad sectors.
    505670 KB in use by the system.
    65536 KB occupied by the log file.
    257454084 KB available on disk.

    4096 bytes in each allocation unit.
    89461960 total allocation units on disk.
    64363521 allocation units available on disk.

    C:\Windows\system32>
    20) Make a backup image using Macrium:
    Macrium Software | Your Image is Everything

    A: Done


    21) Save the backup image to another disk drive or to the cloud. A: Done

    22) Make a new restore point:
    Create System Restore Point in Windows 10 | Tutorials

    A; Done


    23) Upgrade the BIOS: 1202 > A10
    Alienware Area 51 System BIOS, A10 | Driver Details | Dell US

    A: Can't do sorry, I looked that up years ago and it is not designed for my MB. 1202 is the latest from ASUS. Attempting it might brick it.

    The following I have yet to do.
    24) Run the BETA log collector and post a zip into this thread:
    BSOD - Posting Instructions - Windows 10 Forums

    25) Update the specs in the "My Computer" section:
    System Specs - Fill in at Ten Forums | Tutorials
    In the left corner below in your post you find 'My System Specs'.
    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
    System Info - See Your System Specs - Windows 7 Help Forums

    Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, USB wireless network card, etc.)

    26) Run the Dell full diagnostics and post an image of the test results into the thread: A: Can't as this isn't a Dell machine and I wouldn't install any of their tools because they contain more than they are supposed to in the way of bloatware.


    Support for Alienware Area-51 ALX | Diagnostics | Dell US





    27) Uninstall: Hauppauge WinTV-HVR-2200 models 89xxx (Wiltshire) hcw89.sys Hauppauge | Support redirect A: Done, card and software gone.

    28) Uninstall MicroAtx Driver CD nvarch.sys A: Can't find it - isn's it part of NVidia software?
      My ComputerSystem Spec

  6. Ex_Brit's Avatar
    Posts : 355
    Win7 Ult + Win10 Pro + Win10 Enterprise LTSB - all x64
    Thread Starter
       #16

    24) Answer:
    Anyone Brave Enough To Read My Logs?  (1803/1809/1903 (fromWI) Fail Attached Files
      My ComputerSystem Spec


  7. Posts : 25,488
    windows 10 professional version 1607 build 14393.969 64 bit
       #17

    1) The quickest method to upgrade (no troubleshooting the failed upgrades) are:
    a) reset save files
    b) custom install
    c) clean install
    For these methods drivers and applications need to be reinstalled.

    2) There are some failed upgrades that cannot be fixed without one of the above steps.

    3) For troubleshooting:

    4)Some of the steps will tune up the computer.

    5) Open administrative command prompt and copy and paste all at one time:

    Code:
    bcdedit /enum all
    bcdedit | find "osdevice"
    reaentc /info
    diskpart
    lis dis
    lis vol
    sel dis 0
    det dis
    lis par
    sel dis 1
    det dis
    lis par
    sel par 1
    det par
    sel par 2
    det par
    sel par 3
    det par
    sel par 4
    det par
    sel par 5
    det par
    sel dis 2
    det dis
    lis par
    sel par 1
    det par
    sel par 2
    det par
    sel par 3
    det par
    sel dis 3
    det dis
    lis par
    sel par 1
    det par
    sel par 2
    det par
    sel par 3
    det par
    sel par 4
    det par
    sel dis 4
    det dis
    sel dis 5
    det dis
    sel dis 6
    det dis
    sel dis 7
    det dis
    6) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread


    7) Please run the chkdsk /r /v on all partitions/drives.

    8) In the image for device manager there was only one down arrow.
    Click view > click show hidden devices > manually expand all rows (make sure all arrows point down).
    If there were no yellow triangles with black exclamation marks please comment in the thread.
    There was one unknown device.

    9) Run and post the BETA log collector zip before troubleshooting the unknown device.
    How to easily find drivers for Unknown Devices in Windows | PCWorld
    https://www.howtogeek.com/193798/how...evice-manager/

    10) Reinstall the Canon printer and plan to uninstall before the next upgrade attempt.
    Last edited by zbook; 4 Weeks Ago at 20:06.
      My ComputerSystem Spec

  8. Ex_Brit's Avatar
    Posts : 355
    Win7 Ult + Win10 Pro + Win10 Enterprise LTSB - all x64
    Thread Starter
       #18

    Will answer tomorrow. I had a very long response all ready to post and it refused saying message too short, how ridiculous.
    I am now very tired and have a splitting headache.
    Suffice it to know that I have tried a clean install with the 1809 ISO burned to a DVD and even that failed.
    Why aren't the MVP's here and elsewhere telling MS to clean up their act?
    Maybe tomorrow I'll have the energy to file a reply to your above.....sorry .
      My ComputerSystem Spec

  9. Ex_Brit's Avatar
    Posts : 355
    Win7 Ult + Win10 Pro + Win10 Enterprise LTSB - all x64
    Thread Starter
       #19

    Replies inline
    1) The quickest method to upgrade (no troubleshooting the failed upgrades) are:

    a) reset save files A: tried and failed
    b) custom install
    A: tried and failed

    c) clean install
    A: tried and failed

    For these methods drivers and applications need to be reinstalled. A: Understood


    2) There are some failed upgrades that cannot be fixed without one of the above steps. A: Agree, but up-to and including Windows 7 one could obtain one-on-one update assistance from a MS Technician individually, now it's left to you brave souls to do their dirty work helped, perhaps, by the Windows Insiders.

    3) For troubleshooting:

    4)Some of the steps will tune up the computer.

    5) Open administrative command prompt and copy and paste all at one time:
    see blow

    Microsoft Windows [Version 10.0.16299.1087]
    (c) 2017 Microsoft Corporation. All rights reserved.
    O:\Windows\system32>bcdedit /enum all
    Windows Boot Manager
    --------------------
    identifier {bootmgr}
    device partition=C:
    description Windows Boot Manager
    locale en-us
    inherit {globalsettings}
    default {default}
    resumeobject {5fee0574-5d51-11e9-9dd8-002618086fdb}
    displayorder {default}
    {5fee0571-5d51-11e9-9dd8-002618086fdb}
    {current}
    toolsdisplayorder {memdiag}
    timeout 30
    Windows Boot Loader
    -------------------
    identifier {default}
    device partition=C:
    path \Windows\system32\winload.exe
    description Win 7 Ultimate x64
    locale en-US
    osdevice partition=C:
    systemroot \Windows
    resumeobject {93ef4548-6311-11e9-b6e7-806e6f6e6963}
    Windows Boot Loader
    -------------------
    identifier {5fee0571-5d51-11e9-9dd8-002618086fdb}
    device partition=N:
    path \Windows\system32\winload.exe
    description Win 10 Enterprise x64
    locale en-US
    loadoptions DDISABLE_INTEGRITY_CHECKS
    inherit {bootloadersettings}
    allowedinmemorysettings 0x15000075
    osdevice partition=N:
    systemroot \Windows
    resumeobject {5fee0570-5d51-11e9-9dd8-002618086fdb}
    nx OptIn
    bootmenupolicy Standard
    Windows Boot Loader
    -------------------
    identifier {current}
    device partition=O:
    path \Windows\system32\winload.exe
    description Win 10 Professional x64
    locale en-US
    inherit {bootloadersettings}
    allowedinmemorysettings 0x15000075
    osdevice partition=O:
    systemroot \Windows
    resumeobject {5fee0574-5d51-11e9-9dd8-002618086fdb}
    nx OptIn
    bootmenupolicy Standard
    hypervisorlaunchtype Auto
    Windows Boot Loader
    -------------------
    identifier {5fee0576-5d51-11e9-9dd8-002618086fdb}
    device ramdisk=[N:]\Recovery\WindowsRE\Winre.wim,{5fee0577-5d51-11e9-9dd8-002618086fdb}
    path \windows\system32\winload.exe
    description Windows Recovery Environment
    locale en-us
    inherit {bootloadersettings}
    displaymessage Recovery
    osdevice ramdisk=[N:]\Recovery\WindowsRE\Winre.wim,{5fee0577-5d51-11e9-9dd8-002618086fdb}
    systemroot \windows
    nx OptIn
    bootmenupolicy Standard
    winpe Yes
    Windows Boot Loader
    -------------------
    identifier {c4266260-5c96-11e9-ac6b-002618086fdb}
    device partition=C:
    path \Windows\system32\winload.exe
    description Win 7 Ultimate SP1 x64
    locale en-US
    osdevice partition=C:
    systemroot \Windows
    resumeobject {13466389-5ca2-11e9-866a-806e6f6e6963}
    Resume from Hibernate
    ---------------------
    identifier {13466389-5ca2-11e9-866a-806e6f6e6963}
    device partition=C:
    path \Windows\system32\winresume.exe
    description Win 7 Ultimate SP1 x64
    locale en-US
    inherit {resumeloadersettings}
    filedevice partition=C:
    filepath \hiberfil.sys
    debugoptionenabled No
    Resume from Hibernate
    ---------------------
    identifier {5fee0570-5d51-11e9-9dd8-002618086fdb}
    device partition=N:
    path \Windows\system32\winresume.exe
    description Windows Resume Application
    locale en-US
    inherit {resumeloadersettings}
    recoverysequence {5fee0572-5d51-11e9-9dd8-002618086fdb}
    recoveryenabled Yes
    allowedinmemorysettings 0x15000075
    filedevice partition=N:
    filepath \hiberfil.sys
    bootmenupolicy Standard
    debugoptionenabled No
    Resume from Hibernate
    ---------------------
    identifier {5fee0574-5d51-11e9-9dd8-002618086fdb}
    device partition=O:
    path \Windows\system32\winresume.exe
    description Windows Resume Application
    locale en-US
    inherit {resumeloadersettings}
    recoverysequence {5fee0576-5d51-11e9-9dd8-002618086fdb}
    recoveryenabled Yes
    allowedinmemorysettings 0x15000075
    filedevice partition=O:
    filepath \hiberfil.sys
    bootmenupolicy Standard
    debugoptionenabled No
    Resume from Hibernate
    ---------------------
    identifier {93ef4548-6311-11e9-b6e7-806e6f6e6963}
    device partition=C:
    path \Windows\system32\winresume.exe
    description Win 7 Ultimate x64
    locale en-US
    inherit {resumeloadersettings}
    filedevice partition=C:
    filepath \hiberfil.sys
    debugoptionenabled No
    Windows Memory Tester
    ---------------------
    identifier {memdiag}
    device partition=C:
    path \boot\memtest.exe
    description Windows Memory Diagnostic
    locale en-us
    inherit {globalsettings}
    badmemoryaccess Yes
    EMS Settings
    ------------
    identifier {emssettings}
    bootems No
    Debugger Settings
    -----------------
    identifier {dbgsettings}
    debugtype Local
    RAM Defects
    -----------
    identifier {badmemory}
    Global Settings
    ---------------
    identifier {globalsettings}
    inherit {dbgsettings}
    {emssettings}
    {badmemory}
    Boot Loader Settings
    --------------------
    identifier {bootloadersettings}
    inherit {globalsettings}
    {hypervisorsettings}
    Hypervisor Settings
    -------------------
    identifier {hypervisorsettings}
    hypervisordebugtype Serial
    hypervisordebugport 1
    hypervisorbaudrate 115200
    Resume Loader Settings
    ----------------------
    identifier {resumeloadersettings}
    inherit {globalsettings}
    Device options
    --------------
    identifier {5fee0577-5d51-11e9-9dd8-002618086fdb}
    description Windows Recovery
    ramdisksdidevice partition=N:
    ramdisksdipath \Recovery\WindowsRE\boot.sdi
    O:\Windows\system32>bcdedit | find "osdevice"
    osdevice partition=C:
    osdevice partition=N:
    osdevice partition=O:
    O:\Windows\system32>reaentc /info
    'reaentc' is not recognized as an internal or external command,
    operable program or batch file.
    O:\Windows\system32>diskpart
    Microsoft DiskPart version 10.0.16299.15
    Copyright (C) Microsoft Corporation.
    On computer: DESKTOP-5DRPRSR
    DISKPART> lis dis
    Disk ### Status Size Free Dyn Gpt
    -------- ------------- ------- ------- --- ---
    Disk 0 Online 465 GB 1024 KB
    Disk 1 Online 465 GB 2048 KB
    Disk 2 Online 931 GB 0 B
    Disk 3 No Media 0 B 0 B
    Disk 4 No Media 0 B 0 B
    Disk 5 No Media 0 B 0 B
    Disk 6 No Media 0 B 0 B
    Disk 7 Online 2794 GB 0 B *
    DISKPART> lis vol
    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 0 D DVD-ROM 0 B No Media
    Volume 1 E DVD-ROM 0 B No Media
    Volume 2 C Win 7 Ult NTFS Partition 465 GB Healthy System
    Volume 3 L Spare NTFS Partition 232 GB Healthy
    Volume 4 M Spare NTFS Partition 232 GB Healthy
    Volume 5 N Win 10 Ente NTFS Partition 248 GB Healthy
    Volume 6 O Win 10 Prof NTFS Partition 341 GB Healthy Boot
    Volume 7 K Spare NTFS Partition 341 GB Healthy
    Volume 8 NTFS Partition 856 MB Healthy Hidden
    Volume 9 P Removable 0 B No Media
    Volume 10 Q Removable 0 B No Media
    Volume 11 R Removable 0 B No Media
    Volume 12 S Removable 0 B No Media
    Volume 13 T LaCie - Bac NTFS Partition 698 GB Healthy
    Volume 14 U iTunes Back NTFS Partition 698 GB Healthy
    Volume 15 V Backups NTFS Partition 1397 GB Healthy
    DISKPART> sel dis 0
    Disk 0 is now the selected disk.
    DISKPART> det dis
    WDC WD5003AZEX-00K1GA0
    Disk ID: 0CD509A9
    Type : SATA
    Status : Online
    Path : 0
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(1F02)#ATA(C00T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No
    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 2 C Win 7 Ult NTFS Partition 465 GB Healthy System
    DISKPART> lis par
    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Primary 465 GB 31 KB
    DISKPART> sel dis 1
    Disk 1 is now the selected disk.
    DISKPART> det dis
    WDC WD5003AZEX-00K1GA0
    Disk ID: EA8A5111
    Type : SATA
    Status : Online
    Path : 1
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(1F02)#ATA(C01T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No
    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 3 L Spare NTFS Partition 232 GB Healthy
    Volume 4 M Spare NTFS Partition 232 GB Healthy
    DISKPART> lis par
    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Primary 232 GB 1024 KB
    Partition 2 Primary 232 GB 232 GB
    DISKPART> sel par 1
    Partition 1 is now the selected partition.
    DISKPART> det par
    Partition 1
    Type : 07
    Hidden: No
    Active: Yes
    Offset in Bytes: 1048576
    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 3 L Spare NTFS Partition 232 GB Healthy
    DISKPART> sel par 2
    Partition 2 is now the selected partition.
    DISKPART> det par
    Partition 2
    Type : 07
    Hidden: No
    Active: No
    Offset in Bytes: 250049724416
    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 4 M Spare NTFS Partition 232 GB Healthy
    DISKPART> sel par 3
    The specified partition is not valid.
    Please select a valid partition.
    There is no partition selected.
    DISKPART> det par
    There is no partition selected.
    Please select a partition and try again.
    DISKPART> sel par 4
    The specified partition is not valid.
    Please select a valid partition.
    There is no partition selected.
    DISKPART> det par
    There is no partition selected.
    Please select a partition and try again.
    DISKPART> sel par 5
    The specified partition is not valid.
    Please select a valid partition.
    There is no partition selected.
    DISKPART> det par
    There is no partition selected.
    Please select a partition and try again.
    DISKPART> sel dis 2
    Disk 2 is now the selected disk.
    DISKPART> det dis
    WDC WD1002FBYS-02A6B0
    Disk ID: 2362ECED
    Type : SATA
    Status : Online
    Path : 3
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(1F02)#ATA(C03T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : Yes
    Pagefile Disk : Yes
    Hibernation File Disk : No
    Crashdump Disk : Yes
    Clustered Disk : No
    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 5 N Win 10 Ente NTFS Partition 248 GB Healthy
    Volume 6 O Win 10 Prof NTFS Partition 341 GB Healthy Boot
    Volume 7 K Spare NTFS Partition 341 GB Healthy
    Volume 8 NTFS Partition 856 MB Healthy Hidden
    DISKPART> lis par
    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Primary 248 GB 1024 KB
    Partition 2 Recovery 856 MB 248 GB
    Partition 0 Extended 682 GB 248 GB
    Partition 3 Logical 341 GB 248 GB
    Partition 4 Logical 341 GB 590 GB
    DISKPART> sel par 1
    Partition 1 is now the selected partition.
    DISKPART> det par
    Partition 1
    Type : 07
    Hidden: No
    Active: Yes
    Offset in Bytes: 1048576
    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 5 N Win 10 Ente NTFS Partition 248 GB Healthy
    DISKPART> sel par 2
    Partition 2 is now the selected partition.
    DISKPART> det par
    Partition 2
    Type : 27
    Hidden: Yes
    Active: No
    Offset in Bytes: 266456793088
    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 8 NTFS Partition 856 MB Healthy Hidden
    DISKPART> sel par 3
    Partition 3 is now the selected partition.
    DISKPART> det par
    Partition 3
    Type : 07
    Hidden: No
    Active: No
    Offset in Bytes: 267354533888
    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 6 O Win 10 Prof NTFS Partition 341 GB Healthy Boot
    DISKPART> sel dis 3
    Disk 3 is now the selected disk.
    DISKPART> det dis
    TEAC USB HS-CF Card USB Device
    Disk ID: 00000000
    Type : USB
    Status : No Media
    Path : 0
    Target : 0
    LUN ID : 0
    Location Path : UNAVAILABLE
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No
    There are no volumes.
    DISKPART> lis par
    There are no partitions on this disk to show.
    DISKPART> sel par 1
    The specified partition is not valid.
    Please select a valid partition.
    There is no partition selected.
    DISKPART> det par
    There is no partition selected.
    Please select a partition and try again.
    DISKPART> sel par 2
    The specified partition is not valid.
    Please select a valid partition.
    There is no partition selected.
    DISKPART> det par
    There is no partition selected.
    Please select a partition and try again.
    DISKPART> sel par 3
    The specified partition is not valid.
    Please select a valid partition.
    There is no partition selected.
    DISKPART> det par
    There is no partition selected.
    Please select a partition and try again.
    DISKPART> sel par 4
    The specified partition is not valid.
    Please select a valid partition.
    There is no partition selected.
    DISKPART> det par
    There is no partition selected.
    Please select a partition and try again.
    DISKPART> sel dis 4
    Disk 4 is now the selected disk.
    DISKPART> det dis
    TEAC USB HS-xD/SM USB Device
    Disk ID: 00000000
    Type : USB
    Status : No Media
    Path : 0
    Target : 0
    LUN ID : 1
    Location Path : UNAVAILABLE
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No
    There are no volumes.
    DISKPART> sel dis 5
    Disk 5 is now the selected disk.
    DISKPART> det dis
    TEAC USB HS-MS Card USB Device
    Disk ID: 00000000
    Type : USB
    Status : No Media
    Path : 0
    Target : 0
    LUN ID : 2
    Location Path : UNAVAILABLE
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No
    There are no volumes.
    DISKPART> sel dis 6
    Disk 6 is now the selected disk.
    DISKPART> det dis
    TEAC USB HS-SD Card USB Device
    Disk ID: 00000000
    Type : USB
    Status : No Media
    Path : 0
    Target : 0
    LUN ID : 3
    Location Path : UNAVAILABLE
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No
    There are no volumes.
    DISKPART> sel dis 7
    Disk 7 is now the selected disk.
    DISKPART> det dis
    It seems to stick here.
    6) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread


    7) Please run the chkdsk /r /v on all partitions/drives.
    A: Already done, do you really want me to it all again? The only time Windows did a 3-stage reapair of the File System was after one of these failed updates.

    8) In the image for device manager there was only one down arrow.
    A: Sorry, here goes:

    Click image for larger version. 

Name:	cap1.JPG 
Views:	1 
Size:	111.9 KB 
ID:	231606Click image for larger version. 

Name:	Cap5.JPG 
Views:	20 
Size:	16.4 KB 
ID:	231610Click image for larger version. 

Name:	Cap4.JPG 
Views:	1 
Size:	114.3 KB 
ID:	231609Click image for larger version. 

Name:	Cap3.JPG 
Views:	1 
Size:	120.1 KB 
ID:	231608Click image for larger version. 

Name:	Cap2.JPG 
Views:	1 
Size:	88.6 KB 
ID:	231607

    9) Run and post the BETA log collector zip before troubleshooting the unknown device. A: I can no longer locate the Beta Log Collector but as I had previously downloaded it, I will use that.
    How to easily find drivers for Unknown Devices in Windows | PCWorld
    https://www.howtogeek.com/193798/how...evice-manager/

    Done

    10) Reinstall the Canon printer and plan to uninstall before the next upgrade attempt.
    A: Will do.
    Anyone Brave Enough To Read My Logs?  (1803/1809/1903 (fromWI) Fail Attached Files
      My ComputerSystem Spec

  10. Ex_Brit's Avatar
    Posts : 355
    Win7 Ult + Win10 Pro + Win10 Enterprise LTSB - all x64
    Thread Starter
       #20

    P.S. I think I cured the unknown device by installing the by now very old, Soundmax Vista x64 drivers.
      My ComputerSystem Spec


 
Page 2 of 6 FirstFirst 1234 ... LastLast

Related Threads
Hi guys, I would like to try windows build 1903 so I downloaded the "MediaCreationTool1903.exe" file. Everything went smoothly during the installation process. But after the installation I checked via winver it still shows build 1809. So how can I...
1803 to 1809 in Windows Updates and Activation
Just download the 1809 iso,will this upgrade my 1803 the same as a regular update. With 4 computer trying to save data,just making sure this will work.
Performance & Maintenance Read Logoff and Sign Out Logs in Event Viewer in Windows in Tutorials
How to Read Logoff and Sign Out Logs in Event Viewer in Windows When a user logs off (sign out) of Windows, all of the apps you were using are closed, but the PC isn't turned off. Another person can log in (sign in) without needing to restart...
Performance & Maintenance Read Shutdown Logs in Event Viewer in Windows in Tutorials
How to Read Shutdown and Restart Event Logs in Windows You can use Event Viewer to view the date, time, and user details of all shutdown events caused by a shut down (power off) or restart. The event ID's below will show you these details....
Windows Update & Activation Read Windows Update Logs in Windows 10 in Tutorials
How to Read Windows Update Logs in Windows 10 Starting with Windows 10 build 9926, Windows Update logs are no longer saved to "%windir%\Windowsupdate.log". Windows Update client now uses Event Tracing for Windows (ETW) to generate diagnostic...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:20.
Find Us