How do I reformat entire computer? Solved

Page 4 of 5 FirstFirst ... 2345 LastLast
  1.    08 Dec 2018 #31

    What Are Basic and Dynamic Disks – Features, Differences, Conversion

    This may help you to understand about basic and dynamic disks - and point to how to revert to the default- basic disks.

    1. Explanation:
    Dynamic disk uses dynamic volumes to manage data. It is a separate form of volume management that allows one volume to have noncontiguous extents on one or more physical disks. Dynamic disks use a database to track information about all volumes on the disk as well as information about other dynamic disks, and the location of the database is determined by partition style of the disk. On MBR partitions, the database is contained in the last 1 megabyte (MB) of the disk while database on GPT partitions is located in a 1MB reserved partition. In addition, each dynamic disk in a computer saves a copy of the database, so that Windows can repair a damaged database by using the database on other dynamic disks.
    2. What to do about it
    However, once a disk has been converted to dynamic disk, we will be unable to convert it to basic disk in both Disk Management and Diskpart unless we delete all existing dynamic volumes. Needless to say, this operation will lead to data loss. But fortunately, there is an excellent partitioning tool which makes it possible to restore a dynamic disk to basic without deleting any information.
    - and read on from there.

    Here's MS on this for reference:
    Basic and Dynamic Disks - Windows applications | Microsoft Docs
      My ComputersSystem Spec


  2. Posts : 234
    Windows 10 home Version 10.0.10586 Build 10586
    Thread Starter
       1 Week Ago #32

    I'm back working on this and now won't boot at all. I can't get past the message shown on the blue-screen image in my post #25. So I'm dead in the water.

    I discarded my 16GB USB drive because of the indication at post #21 that it must be a bad drive. I'll buy a new one tomorrow, but to keep going on this tonight I decided to save the clean install files on a 500 GB SSD - bad idea. The procedure deleted everything on the drive and now it shows up with a different name and with only 30GB capacity. I'll buy a 16GB USB drive tomorrow and work on getting my capacity back on my 500GB USB SSD. I'll probably reformat it. Is it okay to copy the files that the Windows utility placed there onto the new USB drive or do I need to go through the entire procedure of downloading the files from the Internet? The files on the SSD are in the screenshot below.

    I have a disk that I made at some point in time and labeled "Repair Disk Windows 10 64-bit" but trying to boot from it returns a message "non-System disk or disk error".

    How can I get my laptop back? I think I've tried most of the suggestions on this thread and now it won't boot at all.

    Click image for larger version. 

Name:	2019-02-09 (2).png 
Views:	42 
Size:	18.4 KB 
ID:	223894
      My ComputersSystem Spec


  3. Posts : 23,969
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #33

    The Ten Forums "My Computer" area has the option to enter multiple computers.
    The displayed computer is an Acer desktop.
    Please post information for the notebook.

    1) Update the specs in the " My Computer " section:

    System Specs - Fill in at Ten Forums | Tutorials
    In the left corner below in your post you find 'My System Specs'.
    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
    System Info - See Your System Specs - Windows 7 Help Forums

    Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, USB wireless network card, etc.)
      My ComputerSystem Spec

  4.    1 Week Ago #34

    lbeck said: View Post
    Is it okay to copy the files that the Windows utility placed there onto the new USB drive or do I need to go through the entire procedure of downloading the files from the Internet?
    To create the USB flash drive from the files and folders on the SSD:

    Enter a Command Prompt or Powershell window with administrator privileges with the USB flash drive connected and run:

    diskpart
    list disk
    select disk # <-replace # with the actual number of the USB flash drive
    clean <-this will erase the disk selected above, make sure it is the USB flash drive!
    create part pri
    format fs=fat32 quick
    assign letter=w
    active
    exit
    exit

    The USB flash drive should now appear as drive W:. Copy all the files and folders from the 32GB partition that was created on the SSD to the USB flash drive W:.
      My ComputerSystem Spec


  5. Posts : 234
    Windows 10 home Version 10.0.10586 Build 10586
    Thread Starter
       1 Week Ago #35

    Still no go.

    I copied the files to a new USB drive and continue to get the blue screen in post #25. I'm wondering if I don't have the proper BIOS boot options. I don't see any option to select "boot from a USB drive" I have shown some pictures of my BIOS screens in the image below.

    I select "boot order" last option in middle left image, then select "USB Diskette..." in the boot order. I also tried "USB CD/DVD..." and that didn't work either.

    I'm showing my Disk Management report just to be complete. As you suggest, I changed the USB drive letter to W.

    Should I create a bootable DVD instead of trying to boot from USB flash drive?

    Click image for larger version. 

Name:	HP boot problems.jpg 
Views:	19 
Size:	204.8 KB 
ID:	223952
      My ComputersSystem Spec


  6. Posts : 23,969
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #36

    1) Entering HP Pavilion dv6t into the HP website displayed 38 results:
    Support Search Results | HP® Customer Support

    2) Look in the battery compartment or open HP support assistant to view the product or serial number

    3) Open the HP website > HP Software and Driver Downloads for HP Laptops | HP® Customer Support > enter the product or serial number to view the full HP model > post a share link into the thread and update the "My Computer" area with the new information.



    4) For the HP notebook:
    a) Power on the computer and repetitively click the F2 key
    b) This should open the HP BIOS UEFI diagnostics
    c) The default version typically tests drive and RAM.
    If the firmware had been updated to a newer version it can perform extensive, loop until failure and component testing.
    d) Perform the available tests and post images of the results into the thread
    e) For the testing make sure that only one drive is installed on the computer during the testing.
      My ComputerSystem Spec


  7. Posts : 234
    Windows 10 home Version 10.0.10586 Build 10586
    Thread Starter
       1 Week Ago #37

    I finally got W10 installed!

    What I did was to burn a boot disk with the install files. An ISO file from MSFT and burned with imgburn. The laptop didn't seem to like the USB flash drive for booting or installing Windows.

    The thing now and this is minor - and maybe shouldn't be messed with given my problems getting here - is that when it boots it presents 3 choices for starting Windows 10. Left alone it chooses the first option (on volume 4) and boots fine.

    Should I worry about this?

    In any event, I'm going to mark this solved. I really appreciate you guys staying with me on this.

    Click image for larger version. 

Name:	DSC_1138.JPG 
Views:	14 
Size:	1.88 MB 
ID:	224000
      My ComputersSystem Spec


  8. Posts : 23,969
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #38

    When possible please update the "My Computer" section with the full product number for the notebook.

    For HP notebooks often the F9 key is used to to view the BIOS boot menu and choose an external USB HD.
      My ComputerSystem Spec

  9.    1 Week Ago #39

    lbeck said: View Post
    I finally got W10 installed!

    What I did was to burn a boot disk with the install files. An ISO file from MSFT and burned with imgburn. The laptop didn't seem to like the USB flash drive for booting or installing Windows.

    The thing now and this is minor - and maybe shouldn't be messed with given my problems getting here - is that when it boots it presents 3 choices for starting Windows 10. Left alone it chooses the first option (on volume 4) and boots fine.

    Should I worry about this?

    In any event, I'm going to mark this solved. I really appreciate you guys staying with me on this.
    You can run msconfig. Select the boot tab. Delete the two unneeded entries.
      My ComputerSystem Spec


  10. Posts : 234
    Windows 10 home Version 10.0.10586 Build 10586
    Thread Starter
       1 Week Ago #40

    zbook said: View Post
    When possible please update the "My Computer" section with the full product number for the notebook.
    Product number on the HP invoice is A2Z59AV
      My ComputersSystem Spec


 
Page 4 of 5 FirstFirst ... 2345 LastLast

Related Threads
Solved Reformat in Installation and Upgrade
Hi My apologies for my ignorance if this question is seen as stupid. I wish to reformat my computer. I have ISO's for Win 10 Anniversary and and Win 10 Creator (1703) versions. Can I use Creator to install Windows 10 on my computer after I...
Reformat win 10 in Installation and Upgrade
Hello all, Can someone instruct me the correct way to reformat windows 10 home. I want reformat to where everything is erased and back to factory condition (like new). I assume when this done that win 10 will reinstall itself and any...
Entire computer ran ridiculously fast. in Performance & Maintenance
I'm not sure where I should post this exactly. It's not an error nor a recent issue, more of a question out of curiosity. Back when Windows 7 came out I had a room mate who got me into building custom PC's from the ground up. On his particular...
So today at around 4 pm, my wifi stopped working and the network drive seemed to have just disappeared and couldn't catch any networks. I restarted my laptop and then it all began. I was first meet with the bsod for windows 10. I was stuck in a...
reformat SSD from Win 7 to Win 10 in Drivers and Hardware
I have a 1TB Samsung 840 EVO that I installed in my old Win 7 machine last year. I am moving it into my new XPS 8700 with Win 10. I am trying to do a Secure Erase so that I can clone the Win 10 drive over to the SSD. The Samsung Magician software...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:58.
Find Us