Can't Boot Windows 10

Page 4 of 6 FirstFirst ... 23456 LastLast

  1. Posts : 35
    Windows 10
    Thread Starter
       #31

    That one works. Go ahead with detail disk?
      My Computer


  2. Posts : 38,435
    windows 10 professional version 1607 build 14393.969 64 bit
       #32

    please post the image of all commands and results
      My Computer


  3. Posts : 35
    Windows 10
    Thread Starter
       #33

    Can't Boot Windows 10-img_4138.jpg
      My Computer


  4. Posts : 38,435
    windows 10 professional version 1607 build 14393.969 64 bit
       #34

    That image displayed the flash drive that is attached to computer.
    It is approximately 29 GB.

    When you booted to the flash drive there were two options:
    a) click install
    b) click repair your computer

    When you clicked repair your computer it opened with troubleshoot > command prompt > you typed the above commands
    When you clicked install it did not display any menu items.

    Power off and power on the computer to view the BIOS.
    See if you can see the computer's drive displayed in the BIOS.

    What are the BIOS settings?
    UEFI
    Legacy
    UEFI native without CSM
    UEFI hybrid with CSM
    Is secure boot on or off

    Post images of the BIOS settings into the thread
      My Computer


  5. Posts : 35
    Windows 10
    Thread Starter
       #35

    So when I go to my boot options I have two separate things to boot from. One of them is Sandisk. The other is partition one. If I select this one I have a drive 0 and am able to do all of the commands you suggested earlier tonight. For disk 0 it says there are no partitions to show. Everything else worked on the commands. And I typed exit. And now I canít see any drives on the where do you want to install Windows.
      My Computer


  6. Posts : 38,435
    windows 10 professional version 1607 build 14393.969 64 bit
       #36

    Were you able to see the drive in the BIOS?
    Is the BIOS Legacy or UEFI?
    Is secure boot on or off?

    Is the drive IDE, SCSI, or SATA?

    In the image that was posted the detail disk command result was missing.
    What was the information for the detail disk?


    Please confirm that this is the motherboard for the computer:
    X470 AORUS ULTRA GAMING (rev. 1.0) | Motherboard - GIGABYTE Global


    The driver for the RAID/SATA may need to be installed first:

    AMD RAID Driver
    [9.2.0.70]
    461.06 MB
    2018/09/21
    Asia China America Europe
    AMD RAID Driver
    * Please installing AMD Chipset Driver ver.17.40 first.
    [17.40]
    414.39 MB
    2018/04/13
    Asia China America Europe
    AMD RAID Driver (Preinstall driver, press F6 during Windows* setup to read from floppy)
    [9.2.0.23]
    0.61 MB
    2018/04/12
    Asia China America Europe


    See solution #2 in this link:
    Hard Disk not Detected During Windows Installation ‚Äď Solved


      My Computer


  7. Posts : 38,435
    windows 10 professional version 1607 build 14393.969 64 bit
       #37

    When available please post images of the BIOS and the answers to the questions in the earlier post.

    Is it set for IDE, ACHI, RAID?

    If you have another flash drive please create a Kyhi bootable rescue flash drive:
    Windows 10 Recovery Tools - Bootable Rescue Disk - Windows 10 Forums
      My Computer

  8. Caledon Ken's Avatar
    Posts : 24,266
    Windows 10 Pro x64 Version 2004
       #38

    Could you also please reconfirm your boot disk attachment. Power off and reseat it if m.2, (remove screw and reseat), if a standard drive reseat both cables, both ends.

    Staring to suspect your drive failed. You said it was working and then nothing. It is brand new so an early failure is possible.

    Boot into BIOS. Does your BIOS see drive. If not reload defaults and check again. Still no sign of drive contact vendor, that drive is likely dead.
      My Computer


  9. Posts : 35
    Windows 10
    Thread Starter
       #39

    Okay so I bought an internal pc ssd, hooked it up. It booted up windows, I put my product key in and it successfully installed, restarted, and the same thing keeps happening. It keeps rebooting to the windows setup screen.
      My Computer


  10. Posts : 38,435
    windows 10 professional version 1607 build 14393.969 64 bit
       #40

    Were the crashes bsod or non-bsod crashes?

    Were you able to place the computer into safe mode?
    Does the computer crash in safe mode?

    Are you able to install Ubuntu/Linux on the new SSD?
    If so evaluate the performance with a different operating system.
      My Computer


 
Page 4 of 6 FirstFirst ... 23456 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:54.
Find Us




Windows 10 Forums