Windows 10: Creating a bootable USB when you only have the contents of the ISO Solved

  1.    01 Aug 2015 #1

    Creating a bootable USB when you only have the contents of the ISO

    Hi there

    It's possible you might have the contents of the ISO but not the actual ISO image itself on HDD.

    It's still possible to create a bootable USB using purely MANUAL commands

    for this example assume Disk nr is 7 and the USB stick is on drive H. The files from the ISO are in say folder WINDVD on drive E

    here's what to do.

    1) open CMD as administrator
    3) LIST DISK
    4) SELECT DISK 7 (remember our example above)
    5) CLEAN
    7) ACTIVE
    9) EXIT (don't close the cmd prompt though)

    10) CD E:\WINDVD\BOOT (again from example contents of ISO are on drive E)
    11) BOOTSECT /NT60 H:

    12) After 11) finishes - takes 1 sec approx. copy the entire contents of directory WINDVD to the USB stick as is - copy contents in same folder layout as on the disk - don't have WINDVD as the high level - copy CONTENTS so ist folder on USB stick will be BOOT.

    13) now you've got a bootable USB.

    I know things like RUFUS make this automatically but if you've only got the extracted contents and don't want to download the whole iso again this should help.

      My ComputerSystem Spec

  2.    01 Aug 2015 #2

    jimbo45 said: View Post
    10) CD E:\WINDVD\BOOT (again from example contents of ISO are on drive E)
    11) BOOTSECT /NT60 H:
    You don't need this step.

    jimbo45 said: View Post
    This is a better command:

    format fs=fat32 quick

    Because then you have a UEFI Boot Mode AND Legacy BIOS Boot Mode compatible Windows 8/10 64-bit USB flash drive.

    Quote from this post:

    4. How to create UEFI Boot Mode and Legacy BIOS Boot Mode compatible Windows 8 64-bit USB flash drive.

    - Connect your USB flash drive.
    - Open a command prompt as administrator and type the following commands.

    list disk
    select disk # CAUTION: Replace # with your target USB flash drive.
    create partition primary
    format fs=fat32 quick

    - In Windows 8, mount the Windows 8 64-bit ISO image file by right-clicking the ISO image file and choosing Mount. If you donít see Mount command from the context menu, go to Open with -> Windows Explorer instead.
    - Select everything in the mounted ISO image file, and copy them into the USB flash drive you prepared earlier.
      My ComputerSystem Spec


Related Threads
Hi this is my first post but I am really confused as to an issue with hyper-V Whenever I go to open the virtual switch manager, it says; The operation on computer 'DESKTOP-V1A0142' failed: Generic error. Is there anyway to fix this. I have not...
Solved Creating USB Boot media Help. in Installation and Upgrade
Hi guys, I've been trying to create USB boot device for W10 but the program closes without warning a little while after it reaches the analysis stage (after 100% download) I've tried 3 times now and can't figure out why its not working.
Creating an ISO from the latest build in Installation and Upgrade
How do you create an ISO from the latest downloaded build. I have seen reference to an ESD file but do not know what or where it is?
I'm one of the many that is still using Win7 on my primary machine for continued support/access to only a couple apps. One of those apps is DQSD (, and I don't think I could function without it. Due to the way DQSD is designed (it has a...
Creating USB Recovery Drive in General Support
Created a recovery drive on build 9879. Went to create one for build 9926, option check box is grayed out and it states that key files are missing. The folder is there with the image so I'm not sure about missing files. I had several BSODs...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:39.
Find Us