Windows 10: Upgrading from 1709 to 1803 via USB Solved

Page 1 of 2 12 LastLast
  1.    09 May 2018 #1

    Upgrading from 1709 to 1803 via USB


    I'm running into a bunch of errors when trying to install this update via windows update. I've tried almost everything to get it working. So I was going to try to do the update via booting from my USB stick. I've already burned the ISO to my USB via the media creation tool. I booted to the USB and it then gives the option to "Install". I just want to make sure when I click this it does an upgrade from 1709 to 1803 and does NOT wipe my entire OS.
      My ComputerSystem Spec


  2. Posts : 2,058
    Windows 7 Pro x64 Windows 10 Pro x64
       09 May 2018 #2

    Then don`t boot from the usb stick, just right click on the Iso file ( if you saved it ) and choose to open with windows explorer and do the update, just click on setup.

    If you didn`t save the Iso, you`ll have to download it. Use the download tool again and this time save the Iso file instead of creating a usb stick.

    Download Windows 10

    No need to boot from the stick. Are you certain you want to install 1803 already ? Much too soon in my opinion.

    You CAN boot from the usb stick, but DO NOT choose custom install, choose to keep all your programs and files. But that way is risky too. Opening the Iso file from within windows 1709 is safer and quicker.

    Remember, ALWAYS back up your data :) If possible, you should create an image of 1709 with Macrium Reflect before you do anything.

    Backup and Restore with Macrium Reflect | Windows 10 Tutorials
    Attached Thumbnails Attached Thumbnails Explorer.JPG  
    Last edited by AddRAM; 09 May 2018 at 16:43.
      My ComputersSystem Spec


  3. Posts : 2,058
    Windows 7 Pro x64 Windows 10 Pro x64
       09 May 2018 #3

    And I suppose you could just use the USB stick and open it in explorer to do the same thing.

    Proceed with caution.
      My ComputersSystem Spec

  4.    09 May 2018 #4

    Thanks for the reply. Yup, I've already tried mounting the ISO and running the setup.exe directly. Always gives an error halfway through. Also already have a macrium backup :)
      My ComputerSystem Spec


  5. Posts : 2,058
    Windows 7 Pro x64 Windows 10 Pro x64
       09 May 2018 #5

    Maybe the download was bad, worked fine for me when I tested it.
      My ComputersSystem Spec

  6.    09 May 2018 #6

    AddRAM said: View Post
    Maybe the download was bad, worked fine for me when I tested it.
    Just tried to do the upgrade via USB. After I hit upgrade it says this option is not available and I have to install from within windows. Oh well, back to troubleshooting the error.
      My ComputerSystem Spec


  7. Posts : 7,655
    10 Home x64 (1803) (10 Pro on 2nd pc)
       09 May 2018 #7

    bobsagetfullhou said: View Post
    Oh well, back to troubleshooting the error.
    @bobsagetfullhou, this will help.

    Microsoft | Resolve Windows 10 upgrade errors : Technical information for IT Pros

    Included in the guide are these sections...

    If the upgrade process is not successful, Windows Setup will return two codes:

    1. A result code: The result code corresponds to a specific Win32 or NTSTATUS error.
    2. An extend code: The extend code contains information about both the phase in which an error occurred, and the operation that was being performed when the error occurred.
    https://docs.microsoft.com/windows/d...de-error-codes

    Resolution procedures for various result+extend codes you may encounter are listed in this section...
    https://docs.microsoft.com/windows/deployment/upgrade/resolution-procedures

    There are also sections explaining the various log files.
      My ComputersSystem Spec

  8.    09 May 2018 #8

    Bree said: View Post
    @bobsagetfullhou, this will help.

    Microsoft | Resolve Windows 10 upgrade errors : Technical information for IT Pros

    Included in the guide are these sections...

    https://docs.microsoft.com/windows/d...de-error-codes

    Resolution procedures for various result+extend codes you may encounter are listed in this section...
    https://docs.microsoft.com/windows/deployment/upgrade/resolution-procedures

    There are also sections explaining the various log files.
    Thanks! Hopefully I can track down the issue this way.
      My ComputerSystem Spec

  9.    09 May 2018 #9

    bobsagetfullhou said: View Post
    Thanks for the reply. Yup, I've already tried mounting the ISO and running the setup.exe directly. Always gives an error halfway through. Also already have a macrium backup :)
    Did you disable any 3rd party AVs? I always do that for major updates.
      My ComputerSystem Spec


  10. Posts : 7,655
    10 Home x64 (1803) (10 Pro on 2nd pc)
       09 May 2018 #10

    SoFine409 said: View Post
    Did you disable any 3rd party AVs? I always do that for major updates.
    Sensible precaution.

    3rd-party AVs may be implicated in failed installs that have error codes 0xC1900101 - 0x20004, 0xC1900101 - 0x40017 or 800704B8 - 0x3001A, according to https://docs.microsoft.com/windows/d...ion-procedures
      My ComputersSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
The XPS Viewer was in 1709 before the upgrade to 1803 and it is not in Apps and Features. How do I use Features on Demand with DISM to install the XPS Viewer? This does not work: dism /online /add-capability /capabilityname:XPS.Viewer~~~~0.0.1.0...
Hi, For last 1 month i have been trying to upgrade my windows from windows 10 1703 to 1709 and i get the same error -0xC1900101-0x30017 and it says "The installation failed in the First_BOOT phase with an error during BOOT operation" I have done...
Found problems The apple airport printer can't print Network Center can't click out 'Change adapter settings', so you can't disable a connection
1803 ISO Availability in Installation and Upgrade
Will the 1803 ISO be available the day of the update ?
I've managed to upgrade some of my home PC's from Win 7 or Win 8 to Wn 10 without any significant problems, but I am having major difficulty upgrading one of my PC's. It is running Win 7 Home 32-bit and when I originally ran the Windows 10...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:48.
Find Us